Violation Detail
Standard Cited: 19100215 A04 Abrasive wheel machinery.
Inspection Nr: 1073888.015
Citation: 02001
Citation Type: Repeat
Abatement Date: 08/06/2015 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 07/09/2015
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC):
Gravity: 1
Report ID: 1032100
Contest Date:
Final Order: 08/07/2015
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 07/09/2015 | $0.00 | 08/06/2015 | Repeat |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch. Sand bay; on or about 22 June 2015 and times prior; a Delta Bench Grinder, Model 23-725; tool rest was not properly adjusted to a maximum of one-eighth of an inch from the abrasive wheel. The gap between the abrasive wheel and work rest measured approximately one-quarter of an inch. The National Park Service was previously cited for a violation of this occupational safety and health standard 29 CFR 1910.215(a)(4), which was contained in OSHA inspection number 559198, citation number 1, item number 1 and was affirmed as a final order on 01 October 2012, with respect to a workplace located at the Toklat B&B Shop.
Translate