Violation Detail
Standard Cited: 19100333 A01 Selection and use of work practices
Inspection Nr: 1063288.015
Citation: 01001B
Citation Type: Serious
Abatement Date: 10/05/2015 2
Initial Penalty: $4,900.00
Current Penalty: $0.00
Issuance Date: 08/06/2015
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 08/25/2015
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $0.00 | 10/05/2015 | Serious | ||
| Penalty | I: Informal Settlement | 08/25/2015 | $0.00 | 09/23/2015 | Serious | |
| Penalty | Z: Issued | 08/06/2015 | $4,900.00 | 09/23/2015 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.333(a)(1): "Deenergized parts." Live parts to which an employee may be exposed shall be deenergized before the employee works on or near them, unless the employer can demonstrate that deenergizing introduces additional or increased hazards or is infeasible due to equipment design or operational limitations. Live parts that operate at less than 50 volts to ground need not be deenergized if there will be no increased exposure to electrical burns or to explosion due to electric arcs: On or about May 11, 2015 an employee was exposed to live electrical conductors while working on a 480 volt commercial oven that had not been deenergized prior to the work being performed. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Translate