Violation Detail
Standard Cited: 19260304 F Woodworking tools.
Inspection Nr: 1044492.015
Citation: 01001
Citation Type: Serious
Abatement Date: 03/17/2015 2
Initial Penalty: $2,800.00
Current Penalty: $1,960.00
Issuance Date: 03/09/2015
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC): R
Gravity: 10
Report ID: 0111100
Contest Date:
Final Order: 03/26/2015
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/26/2015 | $1,960.00 | 03/17/2015 | Serious | |
| Penalty | Z: Issued | 03/09/2015 | $2,800.00 | 03/17/2015 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1926.304(f): All woodworking tools and machinery did not meet the applicable requirements of American National Standards Institute (ANSI), 01.1-1961, Safety Code for Woodworking Machinery: In the following instance the table saw did not comply with ANSI O1.1-1961 Safety Code for Woodworking Machinery, Section 6.1.2.5: Where a hood-type guard cannot be used because of unusual cuts, a jig or fixture that will provide equal safety for the operator shall be used. On the completion of such operations, the guard shall be immediately replaced. Ice Cream Shop - The blade on the DEWALT table saw was not guarded or protected when siding was ripped.
Translate