Violation Detail
Standard Cited: 19100147 C07 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1039828.015
Citation: 01004B
Citation Type: Serious
Abatement Date: 09/25/2015 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 08/07/2015
Nr Instances: 1
Nr Exposed: 10
Related Event Code (REC):
Gravity: 5
Report ID: 0830500
Contest Date:
Final Order: 08/28/2015
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/28/2015 | $0.00 | 09/25/2015 | Serious | |
| Penalty | Z: Issued | 08/07/2015 | $0.00 | 09/11/2015 | Serious |
Text For Citation: 01 Item/Group: 004B Hazard:
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees, and to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: (a)Karl W. Schmidt & Associates, Inc. at 3900 E 68th Ave, Commerce City, CO 80022: On and before February 13th, 2015 the employer did not provide adequate training to ensure that employees acquired the knowledge and skills necessary for the safe application, usage and removal of energy control devices including, but not limited to the following machines or equipment: 1.Geka Hydracrop-100-SD ironworker 2.Komatsu 200-ton press brake 3.Marvel Mark II vertical band saw 4.Steelweld shear 5.400-ton press brake Abatement Note: The training shall include the following: 1)Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control. 2)Each affected employee shall be instructed in the purpose and use of the energy control procedure. 3)All other employees whose work operations are or may be in an area where energy control procedures may be utilized, shall be instructed about the procedure, and about the prohibition relating to attempts to restart or re-energize machines or equipment which are locked out or tagged out.
Translate