Violation Detail
Standard Cited: 19100305 G02 III Wiring methods, components, and equipment for general use.
Inspection Nr: 985724.015
Citation: 01002
Citation Type: Other
Abatement Date: 11/05/2014 2
Initial Penalty: $6,930.00
Current Penalty: $2,800.00
Issuance Date: 10/24/2014
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity:
Report ID: 0626300
Contest Date:
Final Order: 11/24/2014
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 11/24/2014 | $2,800.00 | 11/05/2014 | Other | |
Penalty | Z: Issued | 10/24/2014 | $6,930.00 | 11/05/2014 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: The employer did not ensure employees were protected from electrical shock. This violation was observed on July 15, 2014, at a job site located at 1109 E. Industrial Drive, Sulphur Springs, Texas 75482; where at least one (1) employee in the Raw department used an AMFEC mixer/blender with defective cord.