Translate
Violation Detail
Standard Cited: 19260020 B01 General safety and health provisions.
Inspection Nr: 1436492.015
Citation: 01002
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $5,304.00
Current Penalty: $0.00
Issuance Date: 01/10/2020
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 02/06/2020
Gravity: 10
Report ID: 1032500
Contest Date: 02/05/2020
Final Order: 05/26/2020
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/26/2020 | $0.00 | 02/06/2020 | Other | |
| Penalty | C: Contested | 02/14/2020 | $5,304.00 | 02/06/2020 | Serious | |
| Penalty | Z: Issued | 01/10/2020 | $5,304.00 | 02/06/2020 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1926.20(b)(1): The employer did not initiate and maintain programs necessary to ensure compliance with the Occupational Safety and Health Standards. A safety and health program with policy, hazard assessment, and site work rules was not developed and/or implemented at this job site. a) On or about September 25, 2019, and at times prior thereto, employees were cutting into a pressurized C905 16 inch DR 25 PVC chilled water pipe with a DEWALT DCS 690 cut-off saw and exposed to struck-by hazards from exploding and/or shattering PVC pipe. Note) Abatement Certification AND Documentation Are Required.