Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1521500.015
Citation: 01001
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $5,803.00
Current Penalty: $5,803.00
Issuance Date: 04/15/2021
Nr Instances: 1
Nr Exposed: 5
Abatement Date:
Gravity: 5
Report ID: 0523400
Contest Date:
Final Order: 05/05/2021
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/05/2021 | $5,803.00 | Other | ||
| Penalty | Z: Issued | 04/15/2021 | $5,803.00 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) On or about March 23, 2021, employees operating the Computer Control Sheet Cutter "Chopper #5" (Model # CQ 360 and Serial #400025) were exposed to amputation injury in-that the point of operation was not properly guarded. In the alternative... 29 CFR 1910.147(d)(2): An orderly shutdown of machine or equipment was not utilized to avoid any additional or increased hazards to employees as a result of equipment stoppage: (a) On or about March 23, 2021, the employer did not ensure the Computer Control Sheet Cutter "Chopper #5" (Model # CQ 360 and Serial #400025) was properly shut down utilizing a hazardous energy control program procedure (Lockout/Tagout), which exposed employees to caught-in/crushing hazards and amputation injury.