Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 119822286 - Ftr Associates Inc

Inspection Information - Office: Ca Monrovia District Office

 

Inspection Nr: 119822286
Report ID: 0950644
Open Date: 01/28/2002

Site Address:
Ftr Associates Inc
11862 Burke St
Santa Fe Springs, CA 90670

Mailing Address:
, , 00000

Union Status: NonUnion

SIC:3542

NAICS: 0 


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 05/28/2002

Planning Guide: Safety-Manufacturing

Emphasis:

Close Case:08/15/2002


Related Activity
Type Activity Nr Safety Health
Accident 362553810
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 3 3 6
Current Violations 3 3 6
Initial Penalty $13,540 $0 $0 $500 $0 $14,040
Current Penalty $4,990 $0 $0 $500 $0 $5,490
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Other 3203 A 05/25/2002 06/27/2002 $250 $250 $0 I - Informal Settlement  
2. 01002 Other 23950051 A01 05/25/2002 06/27/2002 $250 $250 $0 I - Informal Settlement  
3. 01003 Other 25000008 A 05/25/2002 06/27/2002 $0 $0 $0 I - Informal Settlement  
4. 02001 Serious 3314 F 05/25/2002 06/04/2002 $470 $470 $0 I - Informal Settlement  
5. 03001 Serious 3314 A 05/25/2002 06/04/2002 $4,050 $12,600 $0 I - Informal Settlement  
6. 04001 Serious 4075 A 05/25/2002 06/20/2002 $470 $470 $0 I - Informal Settlement  

Investigation Summary

Investigation Nr: 201795382
Event: 01/23/2002
Employee Injured When Finger Amputated By Punch Press

At 8:15 a.m. on January 23, 2001, Employee #1 suffered a finger amputation below the first knuckle of the left index finger which occurred at the FTR Associates, Inc. Spring and Stamping facility located in Santa Fe Springs, California. Employee #1 is employed by Personnel Plus but was working at FTR Associates as a machine helper. Employee #1 at the time of the accident was trying to unjam a strip of metal about 3.5 inches wide that had buckled and was not moving. The feeder, Numatics Model 34DSP435C012 Q, is used to feed strips of metal into the 75-ton punch press P-2, manufactured by Bliss. The die had just punched the strip of metal but one of the pieces of metal that was punched got stuck in the hole of the strip. This caused the strip to not move forward until the jammed piece could be removed. A coworker, the set-up man, instructed Employee #1 not to touch the machine and that he would be right back to unjam the machine, but Employee #1 did not listen. Employee #1 turned the punch press off and it did not move. He then straightened the metal strip. As he held the metal strip with his left hand he turned the air back on to the feeder with his right hand. Employee' #1's left index finger was in the hole of the strip at about the first knuckle. When he turned the feeder on, the strip shot forward with enough force to amputate the finger below the knuckle.

Keywords:amputated, finger, caught by, jammed, lockout, punch press

Investigated Inspection
# Inspection Age Sex Degree Nature Occupation
1 119822286 Non Hospitalized injury Amputation Machine operators, not specified
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close