US Department of Labor's OSHA cites Texas-based cement mixer
manufacturer for 35 workplace safety and health violations
Continental Manufacturing Co. fined $286,200 for exposing workers to serious hazards
HOUSTON, Texas – Continental Manufacturing Co. Inc., doing business as Continental Mixer, has been cited by the U.S. Department of Labor's Occupational Safety and Health Administration for 35 safety and health violations, including failure to implement lockout/tagout procedures to protect workers who service or maintain machines and failure to maintain occupational noise exposure limits. The inspection began in response to a complaint regarding a worker who was injured using an unguarded power tool at the employer's Houston facility. Proposed penalties total $286,200.
"By failing to identify and correct these numerous safety and health violations, Continental Mixer has exposed its workers to needless and unnecessary hazards, jeopardizing employees' safety," said Mark Briggs, OSHA's area director in the Houston South Area Office.
The 22 serious safety and health violations, with a penalty of $122,300, include failure to indicate the identity of the employee applying a lockout/tagout device and to keep hand tools in safe working condition. Additionally, the company was cited for lack of maintaining personal protective equipment in a sanitary and reliable condition; failure to evaluate workers medically for physical fitness and to use air purifying respirators; and failure to maintain or replace breathing air filters, as instructed by the manufacturer. A serious violation occurs when there is substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.
The four repeat violations, with a penalty of $154,000, were cited for failure to conduct periodic inspections of lockout/tagout procedures and failure to guard machines at the point of operation. A repeat violation exists when an employer previously has been cited for the same or a similar violation of a standard, regulation, rule or order at any other facility in federal enforcement states within the last five years. Similar violations were cited at a related facility in Springfield, Ohio.
Nine other violations, with $9,900 in penalties, were issued for failure to store compressed gas cylinders properly; record injuries and illnesses; identify and evaluate respiratory hazards; and fit test facepiece respirators before employee use.
Due to the repeat violations and the nature of the hazards, OSHA has placed Continental Manufacturing in its Severe Violator Enforcement Program, which mandates targeted follow-up inspections to ensure compliance with the law. The program focuses on recalcitrant employers that endanger workers by committing willful, repeat or failure-to-abate violations.
The Houston-based cement mixer manufacturer employs 130 workers at its Houston location. Its parent company employs about 16,500 worldwide. The company has 15 business days from receipt of its current citations to comply, request an informal conference with OSHA's Houston South area director, or contest the citations and penalties before the independent Occupational Safety and Health Review Commission.
To ask questions, obtain compliance assistance, file a complaint, or report workplace hospitalizations, fatalities or situations posing imminent danger to workers, the public should call OSHA's toll-free hotline at 800-321-OSHA (6742), the agency's Houston South Area Office at 281-286-0583 or its Houston North Area Office at 281-591-2438.
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to ensure these conditions for America's working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit http://www.osha.gov.
U.S. Department of Labor news materials are accessible at http://www.dol.gov. The department's Reasonable Accommodation Resource Center converts departmental information and documents into alternative formats, which include Braille and large print. For alternative format requests, please contact the department at (202) 693-7828 (voice) or (800) 877-8339 (federal relay).
* Accessibility Assistance: Contact OSHA's Office of Communications at 202-693-1999 for assistance accessing PDF materials.