Archive Notice - OSHA Archive

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.

Department of Labor Logo OSHA News Release - Region 6

Please note: As of January 20, 2021, information in some news releases may be out of date or not reflect current policies.

Region 6 News Release: OSHA-08-185-DAL
Friday, Feb. 22, 2008
Contact: Diana Petterson or Elizabeth Todd
Phone: 214-767-4776, ext. 222 or 221

U.S. Department of Labor's OSHA cites Oklahoma City-based M-D Building Products for multiple repeat safety violations

OKLAHOMA CITY -- The alleged failure to protect its employees from safety hazards has brought M-D Building Products in Oklahoma City $107,500 in proposed penalties from the U.S. Department of Labor's Occupational Safety and Health Administration (OSHA) in response to an August 2007 follow-up inspection.

In October 2005 OSHA cited the company $177,000 for violations following an amputation. The August 2007 follow-up inspection resulted in OSHA citing the company with three serious and four repeat violations. M-D Building, a manufacturer of decorative molding assortments and weather proofing products, has about 400 employees at its Oklahoma City facility.

"Within the past few years, the company has had a history of severe injuries including amputations of an arm, hands and fingers, burns and electrical shock," said Carlos Reynolds, OSHA's acting district director in Oklahoma City. "If this employer had implemented periodic safety inspections, as required, many of these injuries could have been avoided."

The three serious violations were for failing to correctly certify that energy control procedures were conducted;, perform forklift operator evaluations; and provide adequate machine guarding. A serious violation is one involving a substantial probability that death or serious physical harm could result from a hazard about which the employer knew or should have known.

The four repeat violations included failing to conduct periodic inspections of energy control procedures with maintenance employees and provide machine guarding to protect employees from rotating and nip points on machinery. A repeat violation is proposed when this same OSHA standard or a like standard has been violated within the last three years.

M-D Building Products has 15 business days from receipt of the citations to comply, request an informal conference with OSHA's Oklahoma City area director, or contest the citations and penalties before the independent Occupational Safety and Health Review commission.

Employers and employees with questions regarding workplace safety and health standards may call OSHA's Oklahoma City Area Office at 405-278-9560 or OSHA's toll-free hotline at 800-321-6742 to report workplace safety and health-related incidents, fatalities or situations posing imminent danger to employees.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to assure the safety and health of America's working men and women by setting and enforcing standards; providing training, outreach and education; establishing partnerships; and encouraging continual process improvement in workplace safety and health. For more information, visit

# # #

U.S. Department of Labor releases are accessible on the Internet at The information in this news release will be made available in alternate format (large print, Braille, audiotape or disc) from the COAST office upon request. Please specify which news release when placing your request at 202-693-7828 or TTY 202-693-7755. The Labor Department is committed to providing America's employers and employees with easy access to understandable information on how to comply with its laws and regulations. For more information, please visit