Archive Notice - OSHA Archive

NOTICE: This is an OSHA Archive Document, and may no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only.

Department of Labor Logo
OSHA News Release
Region 1

Please note: As of January 20, 2021, information in some news releases may be out of date or not reflect current policies.
Region 1 News Release: 07-468-BOS/BOS 2007-075
Wednesday, April 4, 2007
Contact: Ted Fitzgerald
Phone: (617) 565-2074

Bristol, Conn., manufacturing plant fined $142,550 by U.S. Labor Department's OSHA for potential fire, explosion and other hazards

HARTFORD, Conn. -- Conditions that exposed employees to potential fires, explosions and other hazards have resulted in the U.S. Department of Labor's Occupational Safety and Health Administration (OSHA) issuing $142,550 in proposed fines to a Bristol, Conn., manufacturer of precision springs.

Associated Spring, Barnes Group Inc. was cited for 53 alleged serious violations of safety and health standards at its Main Street factory following OSHA inspections begun in September 2006. These were conducted under an OSHA program that targets workplaces with high instances of lost workdays, restricted duty or job transfers due to occupational injuries or illnesses. OSHA issues a serious citation when death or serious physical harm is likely to result from a hazard about which the employer knew or should have known.

OSHA found several hazards involving combustible and flammable materials, including the company's failure to control and clean combustible dust generated during the manufacturing process; open containers of flammable liquids; excess amounts of flammable liquids stored on the shop floor; flammable liquids sprayed within five feet of ignition sources; untested and uninspected ventilation systems; and ungrounded and unbonded containers of flammable and combustible liquids.

"The accumulation of combustible dust, some of it near ignition sources, and the failure to prevent its buildup is particularly disturbing since dust explosions usually occur without warning, causing injuries, deaths and substantial property damage," said C. William Freeman III, OSHA's area director in Hartford. "Other conditions found during the inspections, if left uncorrected, leave employees vulnerable to lacerations, amputations, crushing injuries, electrocution, burns and hearing loss."

The inspections also identified numerous instances of unguarded or inadequately guarded machinery; defects with lifting chains and slings; improperly maintained forklift trucks; inadequate forklift operator training; electrical hazards; lack of personal protective equipment; lack of timely bloodborne pathogen training; inadequate hazard assessment; and lack of annual audiograms for employees exposed to high noise levels.

The company has 15 business days from receipt of the citations to request and participate in an informal conference with the OSHA area director or to contest them before the independent Occupational Safety and Health Review Commission. The inspections were conducted by OSHA's Hartford Area Office, telephone (860) 240-3152.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA's role is to assure the safety and health of America's working men and women by setting and enforcing standards; providing training, outreach and education; establishing partnerships; and encouraging continual process improvement in workplace safety and health. For more information, visit


U.S. Labor Department releases are accessible on the Internet at The information in this news release will be made available in alternate format upon request (large print, Braille, audio tape or disc) from the COAST office. Please specify which news release when placing your request. Call (202) 693-7765 or TTY (202) 693-7755. DOL is committed to providing America's employers and employees with easy access to understandable information on how to comply with its laws and regulations. For more information, please visit