OSHA LOTO eTool
OSHA LOTO eTool
eTools Home : Lockout/Tagout Standard | Preamble | Directive | Interps | Case Law | Credits
OSHA LOTO eTool
OSHA LOTO eTool
lock Lockout/Tagout
LOTO HomeTutorialHot TopicsInteractive Case StudiesAbout this Tool
 
 Links to other
 Web sites with
 information on
 LOTO
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Case Studies  

Case Study 3: Replacement of Nitrogen Pressure Vessel Seals
 
Correct.

The employer is required to implement a procedure which affords each person working on this pressure vessel a level of protection equivalent to that provided by the implementation of a personnel lockout or tagout device. Under these circumstances, each employee must affix a personal lock or tag either on each energy isolation device or on the group lockout device, group lockbox, or comparable mechanism, and each employee must be permitted to verify that all energy sources are effectively isolated.

For more information: Refer to the Lockout/Tagout standard part 1910.147(f)(3),  and The Control of Hazardous Energy – Enforcement Policy and Inspection Procedures.


  Home | Tutorial | Hot Topics | Case Studies | About This Tool | Credits

OSHA LOTO eTool
eTools Home : Lockout/Tagout Standard | Preamble | Directive | Interps | Case Law | Credits
OSHA LOTO eTool
OSHA LOTO eTool