Powered by GoogleTranslate


General Description

  • OSHA IMIS Code Number: A166
  • Chemical Abstracts Service (CAS) Registry Number: 7220-81-7

Health Factors

Monitoring Methods used by OSHA

Laboratory Sampling/Analytical Method:
  • Call Salt Lake Technical Center for sampling instructions for all Aflatoxins.

GC/FID, column- 15m 0.25µm DB-5, temperature 50-300°C at 15°C/min. "When the initial temperature of the column and injector was higher than 60°C, all four AF peaks became broad and the sensitivity was reduced." Analytical solvent was benzene:acetonitrile (98:2).


Goto, Tetsuhisa; Journal of Chromatography, 447 (1988) 410-4.

** All Trademarks are the property of their respective owners.

*Accessibility Assistance: Contact OSHA's Directorate of Technical Support and Emergency Management at (202) 693-2300 for assistance accessing PDF materials.

All other documents, that are not PDF materials or formatted for the web, are available as Microsoft Office® formats and videos and are noted accordingly. If additional assistance is needed with reading, reviewing or accessing these documents or any figures and illustrations, please also contact OSHA's Directorate of Technical Support and Emergency Management at (202) 693-2300.

**eBooks - EPUB is the most common format for e-Books. If you use a Sony Reader, a Nook, or an iPad you can download the EPUB file format. If you use a Kindle, you can download the MOBI file format.

Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.