<< Grantee Produced Training Materials - By Grantee

Grantee Name:
International Union of Operating Engineers
Grant Number:
46C6-HT16
Grant Year:
2005
The grantee developed training that addresses a wide range of hazards that may be encountered by workers, supervisors, and employers involved in disaster response and clean-up activities. Topics include air monitoring, mold awareness, radiation hazards, HAZWOPER, and respiratory protection. Training materials consist of PowerPoint presentations and a lesson plan.

Disaster Response
Title Length Format File Size
Disaster Orientation Training
4-Hour Disaster Orientation 114 slides PPT* 13.2 MB
Air Monitoring 35 slides PPT* 306 KB
Asbestos Awareness 61 slides PPT* 360 KB
Bloodborne Pathogens 34 slides PPT* 662 KB
Confined Space 41 slides PPT* 3.9 MB
Crane Safety 56 slides PPT* 10.6 MB
Electrical 73 slides PPT* 3.0 MB
Excavations
43 slides PPT* 3.7 MB
Government Regulations 43 slides PPT* 707 KB
Hazard Communication 26slides PPT* 281 KB
Hazard Control 40 slides PPT* 2.0 MB
HAZWOPER Decontamination
49 slides PPT* 3.7 MB
HAZWOPER Emergency Response 40 slides PPT* 442 KB
HAZWOPER Incident Command 25 slides PPT* 203 KB
HAZWOPER Medical Surveillance 29 slides PPT* 569 KB
Heat & Cold Stress
34 slides PPT* 191 KB
Lead Abatement 52 slides PPT* 300 KB
Materials Handling 54 slides PPT* 502 KB
Mold Awareness 48 slides PPT* 7.3 MB
Personal Protective Equipment
158 slides PPT* 3.5 MB
Radiation Basics 44 slides PPT* 443 KB
Respiratory Protection 94 slides PPT* 249 KB
Scaffold Safety 55 slides PPT* 7.9 MB
Signs, Signals, Barricades 11 slides PPT* 1.6 MB
Stairways & Ladders
35 slides PPT* 234 KB
Tool Safety 42 slides PPT* 813 KB
Toxicology 15 slides PPT* 186 KB
Understanding MSDS 56 slides PPT* 306 KB
4-Hour Disaster Orientation Lesson Plan 2 pages PDF* 58 KB
Confined Space Flow Chart 1 page PDF* 17 KB
       
DISCLAIMER: This material was produced under grant number 46C6-HT16 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U. S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U. S. Government. The U.S. Government does not warrant or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed.

COPYRIGHT INFORMATION: This material is the copyrighted property of International Union of Operating Engineers. By federal regulation, OSHA reserves a license to use and disseminate such material for the purpose of promoting safety and health in the workplace. The International Union of Operating Engineers hereby authorizes employers and workplace safety and health professionals to use this material, distributed by or through OSHA, in their workplaces or practices in accordance with the guidance contained in the material.

To this end, permission is granted to use such copyrighted material solely for non-commercial, instructional, personal, or scholarly purposes. The material may be used and incorporated into other workplace safety and health programs on the condition that no fee may be charged for the subsequent use of the material. Use of the material for any other purpose, particularly commercial use, without the prior, express written permission of the copyright owner/s is prohibited. Furthermore, any modification to the material is prohibited without the prior, express written permission of the copyright owners.

Accessibility Assistance: Contact the OSHA Directorate of Training and Education at (847) 759-7700 for assistance accessing PDF and PowerPoint materials.

*These files are provided for downloading.