<< Back to Dust Control Handbook for Minerals Processing



Adkins, J.H., P. Krois, M. Hinton, and J. Nussbaumer. Baseline Training Materials for Ass. Compliance and Ace. Red. in the Metal and Nonmetal Mining Industries, 1983.

Alden, J.L., and J.M. Kane. Design of Industrial Ventilation Systems, 1982.

Allen, R.W. Effect of Particle Wettability on Droplet Target Efficiencies in Wet Scrubbers, 1976.

Anderson, D.M. "Dust Control Design by the Air Induction Technique," Int. Medicine and Surgery, February 1964, pp.68-72.

Apt, J., and F.G. Anderson. Respirable Dust Control Manual for Underground Coal Mines, Vol. 2, U.S. Bureau of Mines publication, Apt, Bramer, Conrad and Associates, Contract H0111464, NTIS-PB-19616, 1972.

Armbruster, L., and H. Breuer. "Dust Monitoring and the Principle of On-Line Dust Control," International Symposium on Aerosols in the Mining and Industrial Work Environment.

Armbruster, L., H. Breuer, D. Mark, and J.H. Vincent. "The Definition and Measurement of Inhalable Dust," International Symposium on Aerosols in the toning and Industrial Work Environment, 1981.

Balakrishnan, N.S., G.H. Cheng, and M.N. Patel. Emerging Technologies for Air Pollution Control, 1979.

Bartley, D.L., and G.M. Breuer. "Analysis and Optimisation of the Performance of the 10mm Cyclone," American Industrial Hygiene Association Journal, July 1982, pp. 520-528.

Bauer, H.D. "Dedusting Exp. at a Dump Where Coal Is Loaded From a Face Into the Roadway Conveyor," Proceedings of Conference on Technical Measurement of Dust Prevention and Suppression in Mines, Luxembourg, Belgium, October 11-13, 972, pp. 533546.

Baumeigter, T., E.A. Avallone, and T. Baumeigter 111. Marke Standard Handbook for Mechanical Engineers, 1978.

Becker, H. "Tasks and Trends in Dust Control in German Coalmines, "Symposium on Environmental Engineering in Coal Mining, Harrogate, October 31-November 2, 1972, pp. 135-140.

Bender, M. "Fume Hoods, Open Canopy Type-Their Ability To Capture Pollutants in Various Environments," American Industrial Hygiene Association Journal, February 1979, pp. 118-127.

Brief, R.S. Basic Industrial Hygiene: A Training Manual, American Industrial Hygiene Association, Winter supplement to the Medical Bulletin of Exxon Corporation, 1975.

Bryant, R.K. "Ductwork-How To Make the System Work," Proceedings of 22nd Annual Industrial Ventilation Conference, March 1980.

Burke, E. "Dust Control in the Cement Industry," Cement Lime and Gravel, November 1969, pp. 7

Canton, A.T., W.L. Evans, and C.R. Smith. "Selection of Air Pollution Control Plant for the Minerals Processing Industry," Filtration andSeparation, January/February 1976, pp. $-45.

Cecala, A.B., J.C. Volkwein, and E.D. Thimons. New Bag Nozzle To Reduce Dust From Fluidized Air Bag Machines, 1984.

Cecala, A.B., J.C. Volkwein, E.D. Thimons, and C.W. Urban. Protection Factors of the Airstream Helmet, U.S. Bureau of Mines Report of Investigations 8591, 1981.

Cheng, L. "Collection of Airborne Dust by Water Sprays," Ind. Eng. Chem. Proc. Develop., Vol. 12, No. 3, 1973, pp. 221-225.

Cheng, L. "Formation of Airborne-Respirable Dust at Belt Conveyor Transfer Points," American Industrial Association Journal, Vol. 34, No. 12, December 1973, pp. 540-546.

Cheng, L. "Dynamic Spreading of Drops Impacting Onto a Solid Surface," Ind. Eng. Chem. Proc. Develop., Vol. 16, No. 2, 1977, pp. 192-197.

Cheng, L. "Optimizing Water Sprays for Dust Suppression," Eng. Journal, Vol. 179, No. 10, October 1978, pp.115-118.

Cheremisinoff, P.N., and N.P. Cheremisinoff. "Fabric Filters for Dust Collection-Part 2, Types of Fabrics," Plant Engineering, June 1973, pp. 152-155.

Cheremisinoff, P.N., and N.P. Cheremisinoff. "Fabric Filters for Dust Collection-Part 1, What They Are and How They Work," Plant Engineering, May 1973, pp. 62-65.

Cheremisinoff, R.N., and R.A. Young. Pollution Engineering Practice Handbook, 1976.

Clarke, P.D., and P. Swift. "The Development of Unit Solutions to Industrial Dust Control Problems," Filtration and Separation, May/June 1978, pp. 242-252.

Clauser, R. "A Simple and Inexpensive Hood for Dust Control," Chemical Engineering, July 1975, p. 106.

Cole, H.W. "Foam Suppressants for Control of Dust," Coal Mining and Processing, Vol. 14, No. 10, October 1977, pp. 98-104.

Colijn, H., and P.J. Conners. "Belt Conveyor Transfer Points," Trans. Soc. Min. Eng., June 1972, pp. 204-252.

Committee on Industrial Ventilation, American Conference of Governmental Industrial Hygienists. Industrial Ventilation, 18th Edition. 1984.

Conway, J.R., and R.J. Synk. A Business Look at Baghouse Specifications, Vol. 29, No. 1, 1979.

Courtney, W.C., N.I. Jayaraman, and P.C. Behum. Effect of Water Sprays for Respirable Dust Suppression With a Research Continuous Mining Machine, U.S. Bureau of Mines Report of Investigations 8283, 1978.

Courtney, W.G. "Single Spray Reduces Dust 90%," Coal Mining and Processing, June 1983, pp. 75-77.

Courtney, W.G., and L. Cheng. "Control of Respirable Dust by Improved Water Sprays."

Cross, F.L. "Choosing a Liner for Better Venturi Scrubber Maintenance," Pollution Engineering, March 1978, pp. 5253.

Cross, F.L. Control of Fugitive Dust From Bulk Loading Facilities, 1980.

Cross, F.L., and H.E. Hesketh. Handbook for the Operation and Maintenance of Air Pollution Control Equipment, 1975.

Dalla Valle, J.M. Exhaust Hoods, The Industrial Press, Inc., New York, New York, 1952.

Danielon, J.A. Air Pollution Engineering Manual, 2nd ed., Air Pollution Control District, County of Los Angeles, AP-40, 1973.

Dennis, R. "Approaches to Dust Suppression," GCA Corporation, personal communication, 1981.

Dennis, R., and D.V. Bubenick. Fugitive Emissions Control for Solid Materials Handling Operations, 1983.

Dickie, L. "Unit Collectors Versus Central Systems," Heating/Piping/Air Conditioning, March 1977.

Dickie, L. "Controlling Airborne Dust on Conveyor Belt Systems," Coal Mining and Processing, Vol. 15. No. 1. 1978. nn. 72-74.

Dickie, L. "Insertable Dust Collectors Clean Up Material Handling," Pit and Quarry, March 1978, pp. 62-63.

Dumbaugh, G.D. "Flow From Bulk-Solids Storage Bins," Chemical Engineering, March 1979, pp. 189-193.

Ebly, R.W., and R.H. Uttke. "Conveyor Idler Maintenance and Selection Are the Keys to Efficient Operation," Rock Products, March 1978, pp. 66-69.

Emory, S.F., and J.C. Berg. "Surface Tension Effects on Particle Collection Efficiency," Appendix to U.S. Environmental Protection Agency Report No. EPA-600/778-097,1978.

Evans, D. "Ambitious Dirt Control Program Makes Cassiar a Better Place To Work," Canadian Mining Journal, November 1977, pp. 24-29.

Evans, R.J. Methods and Costs of Dust Control in Stone Crushing Operations, U.S. Bureau of Mines Info. Circular 8669, 1975.

First, M.W. "Engineering Control of Occupational Health Hazards," American Industrial Hygiene Association Journal, September 1983, pp. 621-626.

Folwell, J. "Design of Hoods for Dust Control Systems;' Proceedings of Dust Control Symposium, Institute of Chemical Engineers and Institute of Materials Handling, University of Salford, U.K., March 21-22, 1978, pp. 1-29.

Ford, V.H. "Bottom Belt Sprays as a Method of Dust Control on Conveyors," Mining Technology, September 1973, pp. 387-391.

Gibson, N. "Design of Explosion Protection for Dust Control Equipment," Dust Control Symposium, 1978.

Goddard, B., K. Bower, and D. Mitchell. Control of Harmful Dust in Coal Mines, 1980.

Good fellow, H.D., and M. Bender. "Design Considerations for Fume Hoods for Process Plants," American Industrial Hygiene Association Journal, July 1980, pp.473-484.

Goodfellow, H.D., and M. Bender. "Environmental Design Considerations for Belt Conveyors," CIM Bulletin, September 1982, pp. 97-104.

Gorse, D.E., and W. Scott. "Air Slides Conveyance for Better Dust Control," 46th Annual Technical Session, Mines Accident Prevention Association of Ontario, 7977.

Graham, K.B. "Industrial Fan Selection and Installation," Canadian Mining Journal, October 1975, pp. 69-72.

Grassmuck, G. "Dust Control in Drilling and Blasting," Canadian Pit and Quarry, August 1967, pp. 26-28.

Grover, S.N., H.R. Pruppacher, and A.E. Hamielec. "A Numerical Determination of the Efficiency With Which Spherical Aerosol Particles With Spherical Water Drops, Due to Inert. Impact., Phoretic, and Elec. Forces," J. Atmos. Environ., Vol. 34, October 1977, pp. 1655-1663.

Haemon, W.C. Plant and Process Ventilation, 2nd ed., Industrial Press, Inc., New York, New York, 1963.

Hagopian, R.J., and E.K. Bastress. Engineering Control Research Recommendations, NIOSH Technical Information, NTIS-PB-2737989 February 1976.

Hama, G.M. "Ventilation for Control of Dust From Bagging Operations," Heating and Ventilating, April 1973.

Hama, G.M. "Jet Stream Replaces Vertical Duct in Push-Pull Ventilation of Pickling Tanks," Heatin/Piping/Air Conditioning, January 1973.

Harrold, R. "Sun actants vs. Dust-Do They Work?" Coal Age, Vol. 84, No. 6, June 1979, pp. 102-105.

Hatch, T. "Dust Control: Present and Future Design Considerations;" Mechanical Engineering, Vol. 57, 1935, pp. 154-156.

Hatch, T. "Fundamental Factors in the Design of Exhaust Systems," Mechanical Engineering, February 1935, pp. 109113.

Hatch, T. "Design of Exhaust Hoods for Dust-Control Systems," Journal of Industrial Hygiene and Toxicology, November 19 6, pp. 595-603.

Hazard, W.G. "Exhaust and Ventilation-Part 2: Specific Applications;" National Safety News, December 1978, pp. 81-85.

Hazard, W.G. "Exhaust and Ventilation-Part 1: Basic Principles;" National Safety News, November 1978, pp. 76-83.E

Hiltz, R.H. Underground Application of Foam for Suppression of Respirable Dust, U.S. Bureau of Mines publication, MSA Research Corporation, NTIS-PB249861, September 1975.

Hiltz, R.H., and J.V. Friel. "Using High Expansion Foam To Control Respirable Dust," Min. Congr. J., Vol. 59, No. 5, May 1973, pp. 54-60.

Hodgson, J.M. "Dust Control in Quarries: Screening Operations;" Quarry Manager's Journal, Vol. 5, June 1967, pp. 231-232.

Hoenig, S.A. "Application of Electrostatically Charged Fog to the Suppression of Respirable Dust," Pit and Quarry, August 1976, pp. 88-90.

Hoenig, S.A. Use of Electrostatically Charged Fog for Control of Fugitive Dust Emissions, EPA-600/777-131, November 1977.

Hoenig, S.A. Electrostatic Charging of Dust and the Control of Industrial Dust, Fume and Smoke by Charged Water Fog, 1978.

Kinnear, D.I., J. Edwards, and I.J. Webb. "On Site Testing of High Efficiency Air Filtration Installations," Dust Control Symposium, 1978.

Kleysteuber, W. Safety Evaluation of Conveyor Belt Cleaning Systems, U.S. Bureau of Mines, January 19 .

Kost, J.A., G.A. Shirey, and C.T. Ford. In-Mine Test for Wetting Agent Effectiveness, U.S. Bureau of Mines publication, NTIS-PB82-18 344, 1980.

Kost, J.A., J.C. Yingling, and B.J. Mondics. Guidebook for Dust Control in Underground Mining, U.S. Bureau of Mines publication, Bituminous Coal Research, Inc., Contract J0199046, NTIS-PB83109207, 1981.

Kruse, C.W., and W.O. Bianconi. "Air Flow Induced in Enclosed Inclined Chutes of Material Handling Systems," American Industrial Hygiene Association Journal, May-June 196 pp. 220-227.

Larson, S.L. "Air Induction by Falling Materials as a Basis for Exhaust Hood Design," M.S. Thesis, University of Pittsburgh, 1952.

Lenox, A.E. "A Practical Look at Dust Control," Heating/Piping/Air Conditioning, November 1977.

Mathai, C.V., and L.A. Rathb un. "An Electrostatically Charged Fog Generator for the Control of Inhalable Particles," Proceedings EPA 3rd Symposium on the Transfer and Utilization of Particulate Control Technology, Orlando, Florida, March 9-12, 1981.

Mathai, C.V., L.A. Rathbun, and D.C. Drehmel. "Prototype Tests of a Charged Water Droplet Generator for the Control of lnhalable Fugitive Dust," 74th Annual Meeting of the Air Pollution Control Association, Philadelphia, Pennsylvania, June 1981.

McCaffery, R.A. "Techniques of Effective Dust Control in the Mining and Metallurgy Industry," Annual General Meeting of the Canadian Institute of Mining and Metallurgy, Quebec, April 1971.

McCaffray, N. "Do's and Don'ts," personal communication to Vinit Mody, 1979.

McCoy, J., J. Melcher, J. Valentine, D. Monaghan, T. Muldoon, and J. Kelly. Evaluation of Charged Water Sprays for Dust Control, U.S. Bureau of Mines publication, NTISPB83--210476, January 1983.

Mining Association of Canada. Design Guidelines for Dust Control at Mine Shaft and Surface Operations, 3rd edition, April 1 1980.

Mody, V., and R. Jakhete. Conveyor Belt Dust Control, U.S. Bureau of Mines publication, Contract H0113007, July 1984.

Moechnig, B. "Dust Control in Enclosed Conveyors Using Water Fog," personal communication, Cargill, Inc., 1979.

Morrison, J.N. "Controlling Dust Emissions at Belt Conveyor Transfer Points," Trans. Soc. Min. Eng., Vol. 250, AIMS, March 1971, pp. 47-53.

Murphy, A.S. "Dust Control at the Primary Crusher/ Loadout Level," Canadian Mining Journal, October 1971, pp. 72-73.

Myers, R.C. "Industrial Fans-Guidelines for a Successful Installation," Iron and Steel Engineer, October 1976, pp. 3844.

National Research Council. Measurement and Control of Respirable Dust in Mines, NMAB-363, National Academy of Science, Washington, D.C., 1980.

Neveril, R.B., J.U. Price, and K.L. Engdahl. Capital and Operating Costs of Selected Air Pollution Control Systems-I, 1978.

Neveril, R.B., J.U. Price, and K.L. Engdahl. Capital and Operating Costs of Selected Air Pollution Control Systems-III, 1978.

Nilsson, I.L. "The Design of Dust Enclosures by Means of the Trellex Dust Sealing System," Proceedings of Dust Control Symposium, Institute of Chemical Engineers and Institute of Materials Handling, University of Salford, U.K., March 21-22, 1978, pp. 2-1 to 2-6.

Page, S.J. An Evaluation of Three Wet Dust Control Techniques for Face Drills, U.S. Bureau of Mines Report of Investigations 8595, 1982.

Page, S.J. Evaluation of the Use of Foam for Dust Control on Face Drills and Crushers, U.S. Bureau o Mines Report o Investigations 8595, 1982.

Pereira, N.C., and L.K. Wang. "Air and Noise Pollution Control," Handbook of Environmental Engineering, Volume One, Humana Press, Clifton, New Jersey, 1979.

Powlesland, J.W. "New Uses Continue To Be Found for Air Curtains," Canadian Mining Journal, October 1971, pp. 84o93.

Pring, R.T. "Dust Control in Large-Scale OreConcentrating Operations," Mining Technology, Amer. Inst. of Min. and Met. Engs., Tech. Pub. No. 1225, September 1940.

Pring, R.T., J.F. Knudsen, and R. Dennis. "Design of Exhaust Ventilation for Solid Materials Handling: Fundamental Considerations," Ind. Eng. Chem., Vol. 41, No. 11,  pp. 2442-2450.

Rankin, R.L., S.J. Rodgers, and E.V. Polite. Effects of Engineering Parameters on the Control of Respiral Dust, U.S. Bureau of Mines publication, NTIS-PB83-232207, November 1982.

Reisinger, A.A. "Fabric Filter Collectors-Proper Maintenance Procedures," Pit and Quarry, October 1975, pp. 89-92.

Ricketts, D.B., and R.W. Bock. "Dust Collection-Material Handling Operations, Sinter Plants," Ironmaking Proc. Metall. Soc., Vol. 36, AIME Iron Steel Division, Pittsburgh, Pennsylvania, April 17-20, 1977.

Rodgers, S.J., R.L. Rankin, and M.D. Marshall. Improved Dust Control at Chutes, Dumps, Transfer Points, and Crushers in Noncoal Mining Operations, U.S. Bureau of Mines publication, NTIS-PB297422, 1978.

Rosen, K.M. "Practical Ducting Design, Part 11-Calculating Duct Losses," Plant Engineering, Vol. 26, No. 22, November 1972, pp. 55-58.

Rosenberger, F. "Fully Automated Train Loading of Limestone Products," Pit and Quarry, November 1975, pp. 76-78.

Ross, C.R. Prevention and Suppression of Dust in Mining, Tunneling and Quarrying in Canada, 1958-1962, Occupational Health Division, Department of National Health and Welfare, Ottawa, 1963.

Ross, J.L. "Chemical Eliminates Haulroad Dust," Coal Age, June 1977.

Schlick, D.P. Respirable Dust Control in the Mines of West Germany U.S. Bureau of Mines Info. Circular 90.

Schofield, C., H.M. Sutton, and K.A. Waters. "Generation of Dust by Materials Handling Operations," Proceedings of Dust Control Symposium, Institute of Chemical Engineers and Institute of Materials Handling, University of Salford, U.K., March 21-22, 1978.

Schowengerdt, F.D., and J.T. Brown. "Colorado School of Mines Tackles Control of Respirable Coal Dust," Coal Age, April 1976.

Seibel, R.J. Dust Control at a Transfer Point Using Foam and Water Sprays, U.S. Bureau of Mines Respirable Dust Program Technical Progress Report 97, May 1976.

Soderberg, H.E. "How To Select Ductwork, Hoods and Dust Collectors," Engineering and Mining Journal, Vol. 161, June 1960.

Soderberg, H.E. "Dust Control in Preparation Facilities," American Air Filter Com., presented at the 1978 Coal Convention of the American Mining Congress, 1978.

Stahura, R. "Making Conveyor-Belt Cleaners Work," Plant Engineering, August 1978, pp. 88-90.

Stern, A.C., K.J. Caplean, and P.D. Bush. Cyclone Dust Collectors, 1956.

Taylor, D.H. "Recommendations for Dust Collection Systems," Metal Progress, December 1970, p. 63.

Tomb, T.F., and M. Corn. Comparison of Equiv. Spherical Volume and Aerodynamic Diameters for Irregularly Shaped Particles, U.S. Bureau of Mines publication, 1972.

U.S. Environmental Protection Agency. Air Pollution Engineering Manual, Publication AP-40 1973.

Valle, D.O. Chapter 1, "Theory of Flow of Gases Into an Opening," and Chapter 11, "Hood Entrance Losses," Exhaust Hoods.

Valliere, H.P. "Cement Plant Dust Control," Annual General Meeting of the Canadian Institute of Mining and Metallurgy, Quebec, April 1971.

Volkwein, J.C., A.B. Cecala, and E.D. Thimons. Adding Foam to Dust Control in Minerals Processing, Pittsburgh Research Center, U.S. Bureau of Mines.

Volkwein, J.C., A.B. Cecala, and E.D. Thimons. Use of Foam for Dust Control in Minerals Processing, U.S. Bureau of Mines Report of Investigations 8603, 1983.

Volkwein, J.C., A.B. Cecala, and E.D. Thimons. Effectiveness of Three Water Spray Methods Used To Control Dust During Bagging, U.S. Bureau of Mines Report of Investigations.

Walker, C.L. "A Guide to Dust Collection Planning," Pit and Quarry, November 1979, pp. 95-97, 104.

Walli, R.A. "Dust Collection With Fabric Filters: Some Theory and Applications in the Mineral Industries," Annual General Meeting of the Canadian Institute of Mining and Metallurgy, Quebec, April 25-28, 1971.

Walton, W.H., and A. Woolcock. "The Suppression of Airborne Dust by Water Spray," Aerodynamic Capture of Particles, Pergamon Press, London, 1960, pp. 129-15.

Warrington, G.B. "A New Dust Abatement in a Crushing and Screening Plant," Proceedings 22nd Annual Meeting Aggregate Producers Assoc. of Ontario, Ottawa, March 2, 1979.

Woffinden, G.J., Q.R. Markowski, and D.S. Ensor. "Effects of Surface Tension on Particle Removal," Symposium on the Transfer and Utilization of Particulate Control Technology, Vol. 3.

Wright, R.D. "Design and Calculation of Exhaust Systems for Conveyor Belts, Screens and Crushers," Journal of the Mine Ventilation Society of South Africa, January 1966, pp. 1-7.

Yourt, G.R. Design Guidelines for Dust Control at Mine Shafts and Surface Operations, 1980.