<< Back to Steel Erection Overview Presentation


The highlights presentation contains a Microsoft PowerPoint Presentation and script, which provide a brief summary of OSHA's new steel erection regulation. The objective of this slide presentation is to present some of the key provisions of the new rule. At the end of the training session, the audience should be familiar with major elements of the new regulation. This presentation should take approximately one hour.

Purpose: This presentation is intended to assist you in providing an overview of the new rule to audiences with a broad knowledge of OSHA's former rule. It does not discuss the rule in detail and does not describe all the requirements or changes in the new regulation.

Instructions for Use: Before the presentation, review the latest information on the steel erection rule, which will be posted on OSHA's website. In addition, print copies of OSHA's main Steel Erection page as a handout to inform audience members of the latest information available on the website. For consistency of message on steel erection, follow the script.

Required Software: PowerPoint 2000 or PowerPoint Viewer

These materials are intended to be a resource document for presenters and are not a substitute for any of the provisions of the Occupational Safety and Health Act of 1970 or for any regulations or standards issued by the US Department of Labor. The Department of Labor, OSHA is providing this information as a public service. You should be aware that, while we try to keep the information timely and accurate, there will often be a delay between official publication of the materials, and updates, and their appearance on the website.

You should also review the OSHA standard, 29 CFR Part 1926.750 of the Code of Regulations, and all handouts before any training session

Materials contained in this document are in the public domain and may be reproduced, fully or partially, without permission of the Federal Government. Source credit is requested but not required.