OSHA Strategic Partnership Program<< Back to Region VI


TABLE OF CONTENTS

  1. IDENTIFICATION OF PARTNERS

  2. PURPOSE / SCOPE

  3. GOALS AND STRATEGIES

  4. MEASUREMENTS

  5. ANNUAL EVALUATIONS

  6. BENEFITS

  7. OSHA INSPECTIONS & VERIFICATIONS

  8. PARTNERSHIP MANAGEMENT & OPERATION

  9. EMPLOYEE AND EMPLOYER RIGHTS

  10. TERMINATION

  11. TERM & LOCATION OF PARTNERSHIP AGREEMENT

  12. SIGNATURES

    OSPP OSPADS Data Entry Form
  1. IDENTIFICATION OF PARTNERS

    1. Background

      To facilitate OSHA's goal of reducing occupational-related fatalities and serious injuries within the construction industry, OSHA and The CONLAN Company have agreed to enter into a cooperative partnership agreement with respect to the Schertz Amazon Project which will effectively implement all facets of jobsite safety and achieve self-compliance through cooperative efforts from labor, management, and OSHA.

      This partnership is designed to address the hazards within the construction industry, and to promote and recognize a jobsite controlled by a contractor that has demonstrated an effective safety and health program. The Partnership agreement is an effective tool for ensuring safety at the Project. It will serve to establish a cooperative effort in ensuring safety and maintaining an open line of communication between OSHA and contractors on the worksite. The partnership is consistent with OSHA's long-range efforts to develop a contractor/government partnership approach to safety management. It allows for better use of OSHA resources and innovation in safety management, and encourages increased participation in the safety process from the construction community.

    2. Partners

      The Occupational Safety and Health Administration (OSHA), Austin Area Office and The CONLAN Company.

  2. PURPOSE/SCOPE

    This partnering agreement was developed jointly by OSHA and The CONLAN Company. The common objective and goal of the agreement is to provide a safe and healthful work environment for employees involved in the construction industry and to help prevent serious accidents and fatalities within the industry through increased training, implementation of best work practices, enhanced safety and health programs, and compliance with applicable OSHA standards and regulations.

  3. GOALS AND STRATEGIES

    1. Outcomes

      Employers who are willing to accept this program will receive OSHA assistance and an annual on-site enforcement inspection (in accordance with approved protocols) in lieu of programmed inspections.

    2. Goals

      The overall goal of the partnership is to create a working relationship that focuses on preventing work-related fatalities, controlling or eliminating serious workplace hazards, and establishing a foundation for the development of an effective safety and health program. This partnership will strive to achieve that goal by establishing a foundation of proactive measures which will include:

      1. Achieving a "Zero Lost Time Accident" job site at the Project;
      2. Developing a model safety and health program;
      3. Creating and disseminating new safety and health materials to all subcontractors;
      4. Mentoring and training subcontractors and their employees;
      5. Increasing communication and mutual respect between stakeholders;
      6. Developing a business/labor/government partnership approach to safety management;
      7. More efficiently directing OSHA resources towards the construction industry whose safety and health efforts require the most assistance.

    3. Strategies

      These goals shall be achieved through vigorous self-inspection and implementation and verification of written comprehensive safety and health programs. While this partnership focuses on specific safety and health elements, partners are encouraged to implement a comprehensive SHMS based on the following guidelines:

      Implement a comprehensive job site inspection program by:

      1. Completing Job Hazard Analyses prior to employee exposures, and identifying potential hazards to employee safety and health.

      2. Effectively correcting hazards found during the project on a day-to-day basis.

      3. Ensure all serious hazards are controlled through safe processes or procedures.

      4. Implement an aggressive Fall Protection Plan to include fall protection in all cases where work is being performed six feet or more above lower surfaces.

      Ensure employees receive training as follows:

      1. 100% of on-site supervisory personnel (e.g.; safety superintendents, assistant superintendents, and field engineers) and 50% of the major subcontractor competent person designees will complete the 10-hour OSHA construction course (or its equivalent). Subcontractors can utilize other instructors as long as they can show a valid certification card showing completion of the course.

      2. All employees will receive a site-specific construction safety orientation covering jobsite safety and health issues and procedures relative to the work being performed and the requirements outlined in this Partnership Agreement.

      3. Safety and health training to non-English speaking subcontractors with non-English speaking employees will be conducted in Spanish should the need arise.

      4. Other hazard-specific training will be conducted on an as-needed basis.

      5. Train employees in the OSHA 10-hour construction course (or its equivalent) to the extent possible, with a goal of working towards a 50% of the expected average employees being trained. Subcontractors can utilize other instructors as long as they can show a valid certification card showing completion of the course. Subcontractors have primary responsibility for providing this training. OSHA will provide assistance as needed.

      Require subcontractors who have written safety and health programs to submit them to The CONLAN Company. Companies that do not have their own written safety and health programs will adopt the safety and health program of The CONLAN Company.

      Ensure health-related issues arising during the course of the construction work are adequately addressed internally by The CONLAN Company. All health-related issues will be discussed monthly during the partnership safety meetings.

      An effective hearing conservation program, including area noise monitoring and the implementation of engineering controls where possible, will be implemented.

      An effective environmental monitoring program will be implemented to control airborne hazards, such as silica, and will include personal monitoring, implementation of engineering controls where possible, and the use of respiratory protection.

      Ensure compliance with NFPA 70E when working on live electrical equipment including training and the availability and use of personal protective equipment. A system of control procedures will be implemented to oversee the implementation of appropriate protective measures prior to exposure.

      Ensure all equipment capable of amputations is adequately guarded.

      Utilize a third-party, independent, qualified/certified crane inspector to inspect all cranes after they have been erected and certify them for safe operation. A recent inspection within the last 12 months by a certified crane inspector will be required for all cranes.

      Establish and utilize a program to insure that all crane operators are competent and certified to operate the specific crane in use.

      Establish the criteria to identify and plan all critical lifts to be performed during the construction of the Project.

  4. MEASUREMENTS

    The measurement system will use the OSHA 300A summary and self-inspections to determine the total lost workday injury and illness rate for the participating contractors which will be compared to the average for the BLS rate for construction. Calendar year 2012 data will be used as a baseline.

    Monthly reports will indicate the applicable number of employers, supervisors and employees trained. Records will be maintained of training certifications. All contractors will be required to conduct daily and/or weekly safety toolbox talks, which will be reported as training hours.

    Outcome measures will be gathered on a monthly basis and will incorporate data to analyze the number of employees surveyed, number of injuries, illnesses, fatalities, and serious hazards found and abated as a result of onsite audits and job site inspections.

    Measurement factors will be compiled monthly and submitted to the OSHA Compliance Assistance Specialist in the Austin office.

  5. ANNUAL EVALUATION

    Partnership Evaluation: The partnership will be evaluated by the Austin Area Office on an annual basis, in accordance with the Strategic Partnership Annual Evaluation Format measurement system as specified in Appendix C of CSP 03-2-002, OSHA Strategic Partnership Program for Worker Safety and Health Directive.

    OSHA will ask that the following information be provided by the company for review or collection by OSHA:

    1. OSHA 300/300A and 301 Logs of Injuries and Illnesses

    2. Exposure assessment data for all hazardous chemicals to which employees may exposed, such as methylenedianiline used to cure concrete.

    3. Number of employee training sessions held, number of employees and supervisors/managers trained. Training will include worker's rights training, and will cover any new or temporary workers.

    4. Number of and results of safety /health audits and inspections, which may include hazards identified and corrected

    5. Documentation of employee involvement, including minutes of safety meeting

    6. Documentation of communication between management and employees (may include computer memos, feedback on each suggestion, or other appropriate documentation)

    7. Participation in health or safety seminars (i.e. 10 and 30-Hour Construction Safety and Health Courses, Safety and Health Fair, Trade Shows, etc.)

  6. BENEFITS

    Participant benefits from OSHA may include:

    1. Maximum penalty reductions for all contractors working on any Conlan managed project as allowed in the OSHA Field Operations Manual (FOM) for good faith and history.

    2. Priority consideration for compliance and offsite technical assistance (phone calls/faxes) by OSHA as resources allow.

    3. Other incentives may include a reduction in insurance premiums, workers' compensation claims, and medical costs.

  7. OSHA INSPECTIONS & VERIFICATIONS

    OSHA will conduct one unannounced enforcement verification inspection each year for the term of the project. As resources permit, the OSHA Compliance Assistance Specialist will offer on-site training and assistance to the site. Inspections conducted in response to complaints, Local/Regional Emphasis Programs, or Referrals will qualify as monitoring inspection if, in addition to addressing the complaint/referral item(s), the compliance officer completes the focused inspection protocol for the worksite.

    The enforcement verification visit will be conducted within 6 months of the partner member signing. OSP verifications will be performed in accordance with the OSP Program Directive, CSP [03-02-002].

    The CONLAN Company and its subcontractors will remain subject to OSHA inspections and investigations in accordance with agency procedures. OSHA will continue to investigate fatalities and catastrophes that occur at member companies as well as formal complaints received.

  8. PARTNERSHIP MANAGEMENT AND OPERATION

    1. Participating Contractors

      Selection Criteria for Participants

      Executive Commitment: Participants agree to submit a letter stating executive commitment to develop and maintain a safety and health program for construction projects (and associated staff housing, if applicable). The letter shall be from an officer of the company. It shall make clear such a program is a priority for the officer and that he (or she) will personally track programs and hold managers accountable for administration of the program. The letter should be addressed to the OSHA Area Director. A similar letter should be addressed to managers and employees and posted for two months in the workplace. Such letters must also be translated (in writing) in the language of the workers.

      Commitments to develop a safety and health program, below are the elements of a model program:

      Management Commitment and Employee Involvement

         Member agrees to:
      1. State clearly a worksite policy on safe and healthful work and working conditions, so that all personnel with responsibility at the site (and personnel at other locations with responsibility for the site) fully understand the priority and importance of safety and health protection in the organization.
      2. Establish and communicate a clear goal for the safety and health program and define objectives for meeting that goal so that all members of the organization understand the results desired and measures planned for achieving them.
      3. Provide visible top management involvement in implementing the program so that all employees understand that management's commitment is serious.
      4. Arrange for and encourage employee involvement in the structure and operation of the program and in decisions that affect their safety and health so that they will commit their insight and energy to achieving the safety and health program's goal and objectives.
      5. Assign and communicate responsibility for all aspects of the program so that managers, supervisors, and employees in all parts of the organization know what performance is expected of them.
      6. Have the authority to enforce safety rules and regulations. This authority will include provisions to hold subcontractors and employees accountable and, if necessary, remove contractor employees from the job site.
      7. Provide adequate authority and resources to responsible parties so that assigned responsibilities can be met.
      8. Hold managers, supervisors, and employees accountable for meeting their responsibilities so that essential tasks will be performed.
      9. Review program operations at least annually to evaluate their success in meeting the goals and objectives so that deficiencies can be identified and the program and/or the objectives can be revised when they do not meet the goal of effective safety and health protection.

      Worksite Analysis

         Member agrees to:
      1. Conduct periodic workplace inspections/audits for the purpose of identifying and correcting safety and health hazards. Fall, electrical, struck by and caught between hazards will be documented and corrected.
      2. Inspections/audits will be conducted as frequently as deemed necessary by the company, but in no case less than once every two weeks.
      3. The company will utilize the services of third party safety consultants or their designee to perform these inspections/audits in addition to their own inspection/audit.
      4. Analyze planned and new facilities, processes, materials, and equipment.
      5. Perform routine job hazards analyses prior to work tasks.
      6. Provide a reliable system for employees to notify management about conditions that appear hazardous, and the safety management system shall provide timely and appropriate responses and encourage employees to use the system without fear of reprisal. This system utilizes employee insight and experience in safety and health protection and allows employee concerns to be addressed.
      7. Investigate accidents and "near miss" incidents so that their causes and means of prevention can be identified.
      8. Maintain records of recordable injuries and illnesses as required by OSHA.
      9. Analyze injury and illness trends to identify work practice improvements or material modifications necessary to prevent accidents.
      10. The Conlan Company will prepare an annual analysis of the company's safety and health program. This will include a summary of all major hazards found and corrected through inspection and safety committee efforts, those still uncorrected, injury/illness trends, and recommendations for safety and health improvements.

      Hazard Prevention and Control

         Member agrees to:
      1. Establish, at the earliest time, safe work practices and procedures that are understood and followed by all affected parties. Understanding and compliance are a result of training, positive reinforcement, correction of unsafe performance, and if necessary, enforcement through a clearly communicated disciplinary system.
      2. Provide personal protective equipment.
      3. Maintain the facility and equipment to prevent equipment breakdowns.
      4. Plan and prepare for emergencies, and conduct training and emergency drills, as needed, to ensure that proper responses to emergencies will be "second nature" for all persons involved.
      5. Establish a medical program that includes first aid onsite as well as nearby physician and emergency medical care to reduce the risk of any injury or illness that occurs.

      Safety and Health Training

         Member agrees to:
      1. Instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.
      2. Train workers on fall protection and prevention of electrocutions, caught-between and struck-by hazards, and worker's rights.
      3. Train select personnel in basic first aid and CPR.
      4. Train personnel in hazard communications.
      5. Make material safety data sheets (MSDSs) available to any requesting employee.
      6. Train workers in any other aspects that will enable them to do their jobs safely.

      Cooperation with OSHA

         Member agrees to:
      1. Allow OSHA to conduct an annual on-site enforcement verification visit in accordance with this partnership agreement. The inspection may result in citations and penalties being issued to the company.
      2. Cooperate with OSHA during all inspections and share information on its safety and health program, program analysis, recordkeeping data, and internal inspection/audit results.
      3. Allow an employee representative to participate on OSHA inspections and to allow interviews with workers.
      4. Post notices of imminent danger, when issued by OSHA, and then will immediately correct the hazards or voluntarily remove workers from exposure.

    2. OSHA

      OSHA Commitment

      1. OSHA will endeavor to support the company in reasonable requested training.
      2. OSHA will furnish technical advice, publications, and training material to the employer upon request. Such requests will not cause an OSHA inspection.
      3. Informal complaints (unsigned) --- participant will have an opportunity to resolve such complaints; however, if corrections are inadequate, an inspection may be made to compel compliance.
      4. OSHA may arrange quarterly conference calls among all active participants in the partnership.
      5. OSHA will participate as available in the quarterly Partnership Committee meetings.

      Partnership Limitations

        It is stipulated that partnering employers remain subject to OSHA inspections and investigations in accordance with established Agency procedures.

      Limited Scope Inspections

      1. OSHA will conduct unprogrammed inspections in accordance with the current Agency enforcement policies and procedures, as specified in the Field Operations Manual CPL 02-00-148.
      2. OSHA will conduct accident investigations.
      3. OSHA will conduct investigations of formal (signed) complaints and informal (unsigned) complaints that do not result in voluntary and adequate corrections by the employer.

      Partnership Management:

        The CONLAN Company will be responsible for providing the required data to the Compliance Assistance Specialist at the OSHA office which coordinates the agreement. Annual evaluations will be completed and submitted in a timely manner to OSHA Directorate of Cooperative and State Programs (DCSP). Conference calls will be held on a quarterly basis and face-to-face meetings will be held annually as resources permit.

  9. EMPLOYEE AND EMPLOYER RIGHTS

    This partnership does not preclude employees and/or employers from exercising any right provided under the OSH Act, nor does it abrogate any responsibility to comply with rules and regulations adopted pursuant to the Act.

  10. TERMINATION

    If OSHA chooses to withdraw its participation in the partnership, the entire agreement is terminated.

    This agreement will terminate on July 1, 2014. If either OSHA or The CONLAN Company wishes to withdraw their participation prior to the established termination date, the agreement will terminate upon receiving a written notice of the intent to withdraw from either signatory.

    For non-signatory participants of the strategic partnership, OSHA may terminate the participant's involvement at any time with written notice. Additionally, the participant may withdraw their participation from the strategic partnership at any time with a written notice of the intent to withdraw to OSHA.

    OSHA will terminate the participant's agreement for any sustained willful violation or any sustained failure-to-abate situations.

    OSHA will terminate the agreement for a fatality or catastrophic event (defined as three or more employees admitted to the hospital due to exposure to the same event) that occurs at the site.

    OSHA will terminate the participant's agreement in the event of proven and unresolved discrimination against employees who exercise their protected safety and health rights under the OSH Act.

  11. TERM & LOCATION OF PARTNERSHIP AGREEMENT

    This partnership will terminate on July 1, 2014.

  12. SIGNATURES

    Signed this ____ day of ______, 2013

    _______________________________
    Mike Schroeder
    Superintendent
    The CONLAN Company



    _______________________________
    John Oleson
    Superintendent
    The CONLAN Company



    _______________________________
    R. Casey Perkins, CSP
    Area Director
    U. S. DOL - OSHA
    Austin Area Office





    Attachments:

    Management Commitment Letter
    Application Site Information
    Self Inspection


    OSHA logo

    Mr. R. Casey Perkins
    U.S. Department of Labor - OSHA
    OSHA
    1033 La Posada Dr., Suite 375
    Austin, Texas  78752

    Dear Mr. Perkins,

    Construction Co. is committed to a comprehensive safety and health program that will involve employees at all levels. It is our goal to include the employee in safety and health inspections, and safety and health program analysis.

    The CONLAN Company will focus our efforts on providing safety and health training to our employees in the four areas where most accidents occur in the construction industry: falls, struck by, caught in between and electrocutions hazards.  To accomplish this goal, we will utilize The CONLAN Company Safety designee to assist in maintaining records of all injuries occurring in the work place, conducting inspections of the work place and providing training to all employees.

    Signature                      _____________________

    Title                             _____________________

    Company Name             _____________________

    Date                             _____________________


    OSHA logo

    STRATEGIC PARTNERSHIP APPLICATION SITE INFORMATION

    Employer Name          The CONLAN Company

    Name of Project          Amazon Schertz 

    Site Address               Enterprise and Verde Parkway, Schertz, TX  78154

    Contact Person            Mike Schroeder

    Email address              mschroeder@conlancompany.com

    Office Phone               404-391-9645 

    Fax                             770-423-8010 

    Start Date:                 03/01/2013

    Completion Date:         03/01/2014

    OSHA logo

    STRATEGIC PARTNERSHIP SELF INSPECTION

    Employer Name: ___________________________

    Name of Project: ___________________________

    Inspection Date(s):________________________

                Total number of employees on-site:_________________

               

    Hazards identified and corrected:

                Falls:_______________

                (floors, platforms, roofs)

                Electrical:_______________

                (overhead power lines, power tools and cords, outlets, temporary wiring)

                Struck By:_____________

                (falling objects and vehicles)

                Caught-in/Between:  __________________

                (cave-ins, unguarded machinery, equipment)

                Other hazards: ______________________

                Training:

                Number of employees trained: ____________ 

                            Total employee training hours:_____________

                Number of managers Trained:_____________

                            Total manager training hours:____________

    Note: Total training hours = (number of workers) X (number of hours trained) 

                             

    Inspection Conducted by:___________________________________________



    OSPP OSPADS Data Entry Form

    Please forward this completed form to your OSHA Area Office CAS; Natarajan.joann@dol.gov mandatory fields for initial data entry are denoted with asterisks.

    General Information

    Partnership Name*

    The Conlan Company

    Originating Office*

    Austin

    Primary OSHA Contact

    Joann Natarajan

    Additional OSHA Office(s)

     

    Effective Date*

    5-1-2013

    End Date

    7-1-2014

    # Participating Employers*

     

    # Participating Employees*

    800

    Strategic Areas of Emphasis (check all applicable)

    Industry Concentrations

    Fatality Hazards

    Landscaping (56173)

     

    Fall from Elevation

    X

    Oil/Gas Field Services (212311-1/2)

     

    Trenching

     

    Logging (11331)

     

    Struck By

    X

    Residential Construction (23611)

     

    Powered Industrial Vehicle

    X

    Commercial/Institutional Construction (23622)

     X

    Electrical

    X

    Highway, Street, Bridge Construction (23622)

     

     

     

    Areas of Emphasis – S/H Hazards

    Other

    Amputations in Selected Manufacturing Industries

     

    Hispanic/Immigrant

    X

    Lead

     

    Youth Workers

     

    Silica

     

    Homeland Security

     

    Noise in Non-Construction

     

     

     

    Other General Information

     Union Participating (Y/N)

    N

    Consultation Participating (Y/N)

    N

     VPP Element (Y/N)

     

    Small Business (Y/N)

     

    Level of Safety/Health Management System (SHMS) Focus (Select One)

    No specific Focus

     

    Improve Existing Systems/Programs

     

    Development/Implementation of SHMS

     

    Recognition of Effective SHMS

    X

    Increase # of Employers with Systems/Programs

     

     

     

    Partnership Summary*

     

    The Conlan Company is the general contractor for the Amazon Warehouse Project located in Schertz, Texas.   This partnership will focus on controlling the big four hazards.

     

     

    Signatory Information (copy and paste for each signatory/participant)

    Organization/Employer

    The Conlan Company

    Street

    1800 Parkway Place, Suite 1010

    City/State/Zip Code

    Marietta, Georgia  30067

    SIC

    1541

    NAICS

    236220

    Management Name

    Michael Schroeder

    Title

    Superintendent

    Phone Number

    404-391-9645

    Email mschroeder@conlancompany.com

    Organization/Employer

     

    Street

     

    City/State/Zip Code

     

    SIC

     

    NAICS

     

    Management Name

     

    Title

     

    Phone Number

     

    Email

     

    Organization/Employer

     

    Street

     

    City/State/Zip Code

     

    SIC

     

    NAICS

     

    Management Name

     

    Title

     

    Phone Number

     

    Email

     

    Organization/Employer

     

    Street

     

    City/State/Zip Code

     

    SIC

     

    NAICS

     

    Management Name

     

    Title

     

    Phone Number

     

    Email