Powered by GoogleTranslate

PARTNERSHIP AGREEMENT BETWEEN
OSHA, UAW INTERNATIONAL UNION, AND THE VISTEON CORPORATION


Identification of the Partners:

The partners to this agreement include the U.S. Department of Labor, Occupational and Safety and Health Administration (OSHA); the International Union, United Automobile, Aerospace and Agricultural Implement Workers of America (UAW); and the Visteon Corporation.

Commitment:

The leadership of OSHA, the UAW International Union, and the Visteon Corporation through a common vision are committed to providing Visteon and Ford employees a healthful and safe work place and to demonstrate leadership, responsibility and accountability in furthering worker health and safety.

Goals:

To reduce injuries and illnesses year-over-year from baseline OSHA log summary data at each Visteon location through the creation of a pro-active health and safety culture and a cooperative non-adversarial relationship that optimizes the resources of all parties. Where:

  1. Worker health and safety is designed into facilities, equipment, and processes.
  2. Facilities, equipment and processes receive the maintenance needed to keep them operating in a healthy and safe manner.
  3. Health and safety is led by management and owned by everyone.
  4. Management and workers promote health and safety in the workplace.
  5. Management and workers are responsible and accountable for their actions relative to health and safety in the workplace in a fair and consistent manner.
  6. Progress toward achieving these goals is verified.

Roles and Responsibilities:

A steering committee will be designated consisting of members from Visteon, the UAW, and OSHA. OSHA steering committee representatives will consist of representatives from Compliance Programs, Federal and State Operations, OSHA Region IV, OSHA Region V, and from the Michigan State OSHA Program. The purpose of the steering committee will be to develop an implementation plan, review data and reports, and to meet as appropriate to resolve any issues that arise during the course of this partnership. The steering committee will also be involved in the coordination of site visits and monitoring inspections.

Objective:

The partners agree to construct a partnership based on mutual respect and trust that leverages the resources of all the parties through the systematic anticipation, identification, evaluation and control of health and safety hazards at Visteon locations thereby continuously reducing worker injury and illnesses.

Safety and Health Program:

The Visteon Corporation has a formal safety and health program employing health and safety professionals at the Operations and Corporate levels. The Visteon Safety and Health Program includes all the elements detailed in "OSHA's Safety and Health Management Guidelines" dated January 26, 1989. There are formal commitment statements from management and the UAW leadership in the collective bargaining agreement (CBA).

Employee awareness and involvement are the cornerstones of health and safety at Visteon. The UAW and Visteon leadership recognize the need to continuously improve in health and safety efforts.

Measurement System:

The metrics to assess the progress of this agreement will include:

  • Incidence, severity, and lost work day injury and illness rates at individual Visteon locations and aggregate Company U.S. experience as assembled by the Visteon Health Data Analysis System (HDA), and
  • An annual progress report of physical conditions and issues relative to health and safety.
Employee Awareness and Involvement:

Employee awareness and involvement will be facilitated through the contractual processes developed by Visteon and the UAW. These include the National Joint Committee on Health and Safety (NJCHS); Unit UAW Health and Safety Representatives; Local Ergonomics Committees; Plant Safety Process Review Boards, and local Area Safety Teams; Plant Noise and Hearing Conservation Committees; and Division Accident Investigation and Review Boards. The parties also agree to consider other processes as needs present themselves.

Stakeholder Involvement:

This agreement has been developed by focus groups of the parties that have included OSHA Regional and Area Offices that have Visteon locations, the Michigan Occupational Safety and Health Administration leadership and Area Offices, UAW leadership and Visteon corporate, operations and local management.

Incentives:

Incentives will include inspection protocols (focused inspections) and the diminished probability of wall-to-wall inspections under OSHA targeting programs. The inspection protocols will result in shorter more focused inspections. Also, OSHA will continue to make maximum use of inquiry letters and phone & fax procedures for minor investigations. In addition, provided the Visteon facility is following the Visteon program, OSHA agrees to maximum penalty reductions based on the agency's policies for good-faith reductions for effective safety and health programs. Further, OSHA should also benefit from leading edge technologies, health and safety research, and the identification of emerging issues generated at Visteon. Visteon can also be used as a pilot for OSHA to spread this concept to other companies. Finally, all parties should benefit from positive jointly developed publicity relative to the partnership and whenever health and safety problems are identified and resolved.

Rights of the Parties and Employees:

TThe provisions of this agreement identified herein, shall not modify any legal or contractual rights and remedies.

Knowledge and Technology Transfer:

The International Union, UAW and the Visteon Corporation have jointly conducted health and safety research with the National Institute for Occupational Safety and Health (NIOSH) and have shared the research results with OSHA. Representatives of the UAW and Visteon have also participated at OSHA meetings and conferences on general safety and health topics and on specific topics such as ergonomics. This agreement will continue these actions and expands others such as alerts on new health and safety issues noted at Visteon locations. It is also expected that arrangements may be made to include OSHA representatives, as appropriate, as participants in UAW-Visteon NJCHS health and safety conferences.

OSHA Inspections:

OSHA inspections to investigate employee complaints, serious injuries or fatalities, and National or State emphasis programs are not precluded by this agreement. Visteon plants selected for General Schedule inspections from the OSHA Site-Specific Targeting (SST) list will receive a focused inspection. The focused inspection will include an evaluation of the inspection protocols listed in the agreement. Visteon agrees to facilitate the inspection process by providing OSHA compliance officers access to the plant injury and illness reports related to the protocols. The OSHA compliance officer will review the required record keeping information, conduct a walk through inspection, and interview workers in accordance with OSHA inspection procedures.

Inspection Protocols:

Inspection protocols will be based on the annual analysis of U.S. injury and illness experience from the Visteon Health Data Analysis System (HDA) and from a similar analyses provided OSHA for the location selected for inspection. In general, the protocol will include an investigation of hazards or issues covered under Joint Programs developed by the NJCHS. These include:

  1. Confined Spaces
  2. Skilled Trades Hazards
    • Lifting and Rigging
    • Working at Heights
  3. Maintenance Vehicles
  4. Chemical Safety Training (Hazard Communication)
  5. Energy Control and Power Lock Out (ECPL)
    • Trouble shooting
  6. Ergonomics
  7. Noise Control and Hearing Conservation
  8. Heat Stress
  9. Powered Material Handling Vehicles (PMHV)
  10. Machine Guarding
  11. Personal Protective Equipment (PPE)

Also included in the protocols will be a review of local health and safety programs and the resolution of hazards, issues, and concerns identified during local internal health and safety audits. Protocols will be periodically reviewed and modified by mutual agreement, as appropriate.

Verification:

Verification of health and safety progress is a multi-step process that includes:

  • Data collection and analyses
  • A Corporate Annual Report
  • An annual plant OSHA Day meeting
Data Collection and Analyses:

The HDA System will be used for an annual Corporate review with OSHA of Visteon U.S. Company-wide trends and at individual plant locations to identify local injury and illness trends.

Corporate Annual Report:

A Corporate annual report will be developed and presented at an annual national meeting between the parties. The report will address trends noted in data collection. Among the information included in the annual review will be an analysis of the internal audit results and noise control and hearing conservation efforts.

Plant Annual OSHA Day Meeting:

Each Visteon location covered by this agreement will conduct an annual OSHA Day meeting where the local OSHA Area Director will be invited to the location and briefed by the Plant Manager, the Union Chairperson and their leadership team. The briefing will include a review of the injury and illness experience for the past year and any developing trends as compiled by HDA. The briefing will also include a review of the results of the continuous internal comprehensive inspections conducted by the Plant Safety Engineer and the Unit Health and Safety Representative and the corrective actions taken. Additionally, the briefing will include the results of the Safety and Health Assessment Review Process (SHARP) conducted since the last OSHA Day meeting and the corrective actions taken. The written materials from the OSHA Day meeting will be given to the OSHA Area Director for analysis.

For the purpose of monitoring, OSHA will be afforded the opportunity to conduct an informal walk-through of the facility. OSHA may return at a later date for a two-day informal/monitoring visit of up to fifty percent of the plants. Criteria for return visit will generally be based on locations that have an LWDII of eight or greater and specific areas OSHA may want to review.

The purpose of the monitoring visit is to verify that the information presented in the OSHA Day briefing is an accurate portrayal of what is occurring within the facility. If observable conditions and program implementation are not consistent with the information provided at the OSHA Day meeting, a focused inspection could be initiated and expanded to a traditional inspection with the approval of the Area Director.

The OSHA National Office will be notified when a monitoring visit is being conducted. The OSHA members of the steering committee will coordinate the monitoring visits. Monitoring visits will be based upon the availability of OSHA resources and the LWDII of the facility.

It is understood that items maintained in corrective action files will be prioritized for action with timing milestones as determined by good health and safety practice and by joint agreement of Visteon and UAW-Visteon Health and Safety Professionals. If these tenets are adhered to, OSHA will not use the corrective action files as justification for Willful violations. In general, items identified by Visteon and the UAW or OSHA will be abated immediately, where practicable, and will not result in OSHA citations.

Other:

SHARP is an ongoing management system that monitors health and safety. A presentation on SHARP together with the SHARP manual will be given to OSHA Regional and Area Offices where Visteon has locations. However, Visteon and the UAW solely reserve the right to modify SHARP.

Initiation and Termination of Agreement:

The partnership agreement is effective on the date of signing and will be in effect until midnight three years from the date of signing. After year three of the agreement, the parties will have an option to extend the agreement. Without regard to the three-year term, any of the parties can terminate the agreement within ninety days after notification of the parties of a change in conditions or irreconcilable differences.

Covered Locations:

This agreement covers all Visteon Corporation locations as described in the Appendix.

State Plans:

The Visteon Corporation and OSHA recognize that certain Visteon Corporation facilities are located in states which have assumed authority for the enforcement of OSHA standards pursuant to Section 18 of the Occupational Safety and Health Act. The Visteon Corporation intends to pursue similar agreements with State OSHA Plans.

 

  • FOR VISTEON CORPORATION

 


  • Robert J. Womac
  • Executive Vice President, Operations
  • FOR U.S. DEPARTMENT OF LABOR (OSHA)

 


  • Charles N. Jeffress
  • Assistant Secretary of Labor
  • for Occupational Safety and Health

 


  • Greg Anderson
  • Ford Co-Chair
  • National Joint Committee on Health and Safety

FOR UNITED AUTOMOBILE WORKERS

     


    • Ron Gettelfinger
    • UAW Vice President
    • Director, National Ford Department
  •  

 


  • James E. Patton UAW-Ford Co-Chair
  • National Joint Committee on
  • Health and Safety
  •  

 


  • Franklin E. Mirer
  • Director, UAW Health and Safety
  • Department
APPENDIX
VISTEON CORPORATION LOCATION

Tulsa Glass Tulsa, Oklahoma

Sandusky Sandusky, Ohio

Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close