This website is currently not being updated due to the suspension of federal government services.
The last update to the site was January 22, 2018.
Updates to the site will start again when the federal government resumes operations.
If you need to report a workplace fatality or emergency, call OSHA at 1-800-321-OSHA (6742), TTY 1-877-889-5627.

Alliance -- An OSHA Cooperative Program<< Back to Altec Industries, Inc.


Altec is conducting safety training seminars for OSHA Regional and Area Office staff and other safety and health professionals throughout the United States. More than 300 safety and health personnel participated in the following seminars:

  • August 21, 2012, Burlington, Vermont
  • June 19, 2012, Portland, Oregon
  • April 21, 2012, Boise, Idaho
  • December 7, 2011, Dallas, Texas
  • October 13, 2011, Chicago, Illinois
  • October 11, 2011, Chicago, Illinois
  • April 6, 2011, Dublin, California
  • November 18-19, 2010, Sayreville, New Jersey
  • November 16-17, 2010, Sayreville, New Jersey
  • August 26-27, 2010, Kansas City, Missouri
  • August 24-25, 2010, Kansas City, Missouri
  • June 17-18, 2010, Harrisburg, Pennsylvania
  • June 15-16, 2010, Harrisburg, Pennsylvania
  • April 21-22, 2010, Wethersfield, Connecticut
  • April 19-20, 2010, Wethersfield, Connecticut
  • September 2-3, 2009, Seattle, Washington
  • March 3-4, 2009, Jacksonville, Florida
  • July 17-18, 2008, Albany, New York
  • July 15-16, 2008, Albany, New York
  • June 4-5, 2008, Millbury, Massachusetts
  • June 2-3, 2008, Millbury, Massachusetts
  • January 16-17, 2008, Birmingham, Alabama
  • October 30-31, 2007, Portland, Oregon
  • October 24-25, 2007, Birmingham, Alabama

During the two-day seminar, an Altec representative covers a number of topics, including walk-around inspections, pre-operational checks, load charts and safe work practices. The seminar includes a hands-on demonstration of the equipment presented.