Alliance -- An OSHA Cooperative Program << Back to ADSC: International Association of Foundation Drilling


  • January 31-February 3, 2007: ADSC Equipment Expo '07 & Conference, Orlando, Florida.
    • January 31-February 3, 2007: Jess McCluer, then-Program Analyst, Office of Outreach Services and Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA; Mylene Kellerman and Patrick Stark, Florida On-site Consultation Program; staffed an OSHA and ADSC Alliance Program exhibit booth.
  • December 18, 2006: Drilled Shaft Installation Safety Presentation, Indianapolis, Indiana.
    • Rick Marshall, Chairman, ADSC Safety Committee, presented the Drilled Shaft Installation Safety Presentation to 35 attendees from OSHA Region V, Indiana OSHA and the Indiana On-site Consultation Program in Indianapolis, Indiana.
  • April 29, 2006: ADSC South Central Chapter OSHA 10-hour Construction Outreach Training Program, Sheraton Grand Hotel, Irving Texas.
    • Mike Talmont, Assistant Area Director, Region VI, Ft. Worth, Texas Area Office, USDOL-OSHA; and Rick Marshall, Chairman, ADSC Safety Committee; provided an OSHA 10-Hour Construction Outreach Training Program to 24 attendees at the Sheraton Grand Hotel in Irving, Texas.
  • November 6-9, 2005: Geo Comprehensive Quality Assurance/Quality Control Technical Conference and Interactive Field Day and Exhibition, Sheraton Grand Hotel, Dallas, Texas. [Photo]
    • November 6-9, 2005: Jess McCluer, then-Program Analyst, Office of Outreach Services and Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA; Stephen Boyd, Debroah Coler, Jorge Delucca, Nancy Thai, Jack Rector and Dutch Haverrman, Region VI, Dallas, Texas Area Office, USDOL-OSHA; staffed an OSHA and ADSC Alliance Program exhibit booth.
  • May 7, 2005: ADSC Mid-Atlantic Chapter OSHA Construction 10-hour Course, Hilton McLean Tysons Corner, McLean, Virginia.
    • Danezza Quintero, Occupational Safety and Health Specialist, Office of Construction Services, Directorate of Construction, USDOL-OSHA; and Rick Marshall, Chairman, ADSC Safety Committee, provided an OSHA Construction 10-Hour course to 42 attendees at the Hilton McLean Tysons Corner in McLean, Virginia.
  • April 28-30, 2005: ADSC Board of Directors meeting, Dallas, Texas.
    • April 30, 2005: Jess McCluer, then-Program Analyst, Office of Outreach Services and Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA; gave a presentation to over 30 attendees on the Alliance Program and the activities of the ADSC Alliance.