eTools Home : Logging  Standards | Glossary | Bibliography | User Guide | Credits
Logging eTool
 
Apply Your Knowledge

   
Tree leaning to the right. Good choice.  This top cut is at the correct angle and depth.

Now choose the bottom cut that you would make.
 
Undercut 1 Undercut 2 Undercut 3
 
 

 

 
Undercut 2 This cut is NOT the best choice because it is a flat cut and will result in a Conventional Notch.

Choose another cut.
 



 
Undercut 3 This cut is NOT the best choice because it is ends above the top cut endpoint and will result in a Dutchman Notch.

Choose another cut.


 
   
  << Back to Making the Cuts


 

eTools Home : Logging  Standards | Glossary | Bibliography | User Guide | Credits