||Fact Sheet on Natural Disaster Recovery:
Flood conditions contribute to the growth and transmission of many kinds of fungi, some of which can cause sickness. Cleanup workers are at increased risk of exposure to airborne fungi and their spores because they often handle moldy building materials, decaying vegetable matter, rotting waste material, and other fungus-contaminated debris. The fungal material is carried into the respiratory tract when airborne dust particles are inhaled.
There are many different kinds of fungi, including mildew, molds, rusts, and yeasts. Most of these are harmless, but some can cause respiratory and other disorders when workers inhale or come into contact with fungi. Inhalation is the route of exposure of most concern to flood cleanup workers. The recommendations below offer strategies for workers renovating flooded buildings, homes, and structures to protect themselves while handling building materials that are visibly contaminated with fungi.
For workers cleaning up flooded buildings, homes, and other structures, excessive moisture or water accumulation indoors will encourage the growth of the fungi that are already present. Some fungi have the potential to cause adverse health effects such as allergic responses and asthma attacks. Individual who are sensitive to molds may have signs and symptoms of allergic reactions such as nasal stuffiness, eye irritation, and wheezing. These individuals should minimize fungal exposure by wearing respirators, gloves, and eye protection. They should also seek to eliminate fungi, as described below.
In addition, repeated or prolonged contact of the skin with flood water and continuous sweating can lead to fungal skin infections. These can be minimized or avoided by washing the skin with warm, soapy water and keeping it as dry as possible.
What to do if Symptoms Develop
If a cleanup worker experiences severe allergic or skin symptoms, or severe flu-like symptoms, he or she should seek medical advice. A health care provider can determine whether medication or any other precautions are necessary.
Tips to Remember
For all workers that may be exposed to mold and fungi:
For workers that are cleaning up or renovating buildings and homes that have been flooded, consider the following recommendations:
- Avoid breathing dust (fungal spores) generated by wet building materials, crops, and other materials.
- Consider using an N-95 NIOSH-approved disposable respirator as a minimum when working with moldy or damp hay, grain, compost, or building materials.
- Consider discarding all water damaged materials. Articles that are visibly contaminated with mold should be discarded. When in doubt, throw it out.
- Surfaces that have a light covering of mold should be scrubbed with warm, soapy water and rinsed with a disinfectant made of ½ cup liquid household bleach mixed in one gallon of water.
- CAUTION: Do not mix bleach with other cleaning products that contain ammonia.
- After working with mold-contaminated materials, wash thoroughly, including the hair, scalp, and nails.
- If the safety of food or beverage is questionable, throw it out. Only drink safe drinking water that has been bottled, boiled, or treated until there is confirmation that the community water supply is safe for consumption.
For cleanup workers in rural and agricultural communities:
- If flooding has caused severe damage to a building or home and there is the chance of extensive mold growth, consult with your insurance carrier or local health department to identify a professional with expertise in Mold Remediation.
- If you suspect that flooding has damaged building integrity, consult a structural engineer or other professional with appropriate expertise.
- NIOSH-approved respirators are strongly recommended. Respiratory protection such as the N-95 must be used in accordance with OSHA's Respiratory Protection Standard (29 CFR 1910.134). Also wear gloves and eye protection.
- Remove building materials and furnishings that are wet and may become contaminated with mold growth and place them in sealed impermeable bags or closed containers. Large items with heavy mold growth should be covered with polyethylene sheeting and sealed with duct tape before being removed from the area. These materials can usually be discarded as ordinary construction waste.
- Remove and discard porous organic materials that have become wet or are visibly contaminated (e.g., damp insulation in ventilation system, moldy ceiling tiles, and mildewed carpets). Again, these materials can usually be discarded as ordinary construction waste.
- Clean and disinfect nonporous surfaces where microbial growth has occurred with detergents, chlorine-generating slimicides, or other biocides and ensure that these cleaners have been removed before air handling units are turned on. When you use a biocide or disinfectant, use appropriate personal protective equipment. NIOSH-approved respirators with the appropriate chemical cartridges are recommended. Wear gloves and eye protection also.
For additional information concerning fungi, health effects, and addressing flood damaged materials, please see OSHA's Safety and Health Topics webpage on Molds and Fungi at: http://www.osha.gov/SLTC/molds/index.html
- Silos and other enclosed areas should be vented prior to entry. However, this may not eliminate the problem entirely. If a worker is transporting or working with moldy animal feed, exposures are likely to be threatening if the feed and the worker are enclosed in a barn, silo or other structure. Workers will still need to wear respirators.
- Workers uncapping a silo, shoveling grain, or working with feed, especially in any enclosed space, should always wear at a minimum a NIOSH-approved N-95 particulate respirator. Grain and hay should be stored when fully dry.