Your search for hand power tools has returned 17 results, limited to categories listed at left below.
Results 1 - 15

Search Results Found in:
Interpretations 17
Full Site Search Limited by Categories
 
Result Page:1 2 forward
2009 - 03/16/2009 - Whether electric hand tools disassembled and deemed irreparable by a tool repair service are required to be returned disassembled.
 
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=27029
2010 - 04/30/2010 - Does a truck with a cab containing an intergral falling object protective structure that was manufactured to meet the ISO 3449 standard conform to 29 CFR 1926.601(b)(6)?
 
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=27440
2001 - 12/11/2001 - Guarding requirements for a rotary pneumatic angle-drive hand-held tool.
 
December 11, 2001 Mr. Magnus Thuresson 855 Hazel Trail Crownsville, MD 21032-1822 Re: Vertical Hand Tool Grinder Dear Mr. Thuresson: This is in response to your letter of May 24, 2001 to Keith Goddar
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=24413
2003 - 05/19/2003 - Repair requirements for the cord plug (attachment plug) of double-insulated tools.
 
May 19, 2003 Barry Cole, Executive Vice President Miller Safety Consulting, Inc. 5750 Pecos Street, Suite 6 Denver, CO 80221 Re: Whether an after-market (non-original) cord plug may be used to repair
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=24571
2005 - 01/19/2005 - Application of OSHA construction standards to govern the use of pneumatic hand tools used in construction for cleaning concrete forms, bridge decks, and roads.
 
January 19, 2005 Mr. Thomas C. Tremblay President Guardair Corporation 54 Second Street Chicopee, MA 01020 Re: What OSHA construction standards govern the use of pneumatic hand tools used in construc
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=25004
1976 - 09/15/1976 - Clarification of 1910.212 and 1910.242 as applying to hand-type office paper cutters and sharp edged hand tools.
 
September 15, 1976 Mr. Robert L. Hinman Resident Consultant Nebraska Office Post Office Box 80305 Lincoln, Nebraska 68501 Dear Mr. Hinman: This is in response to your letter dated July 26, 1976, requ
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=18563
1978 - 04/03/1978 - The requirement for fire resistant fluids does not apply to hydraulic tools.
 
April 3, 1978 Mr. James Thomas Demos, LTD. Attorneys at Law 33 North Dearborn Street Suite 826 Chicago, Illinois 60602 Dear Mr. Demos: This is in response to your letter of March 8, 1978, concerning
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=18714
1982 - 04/08/1982 - Pneumatic tools must be designed and used in accordance with good engineering practices.
 
April 8, 1982 Mr. J. Pat Deyle Field Engineer Chicago Pneumatic Tool Company 2200 Bleecker Street Utica, New York 13503 Dear Mr. Deyle: This is in response to your letter of February 15, 1982 concern
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=19013
1984 - 09/11/1984 - Regulations for machine shop and press room safety.
 
September 11, 1984 Mr. Anthony Ambrose, Jr. 67 N. Transithill Drive Depew, New York 14043 Dear Mr. Ambrose: This is in response to your letter of September 4, 1984, in which you request information a
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=19220
1993 - 10/20/1993 - Elevator repair and servicing.
 
October 20, 1993 Mr. Christopher Barber 5080 N. Elston Ave. Chicago, Illinois 60630 Dear Mr. Barber: This is in response to your letter of August 25, addressed to Ms. Patricia K. Clark, former Direct
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=21301
1993 - 11/01/1993 - The use of a crane near overhead power lines.
 
November 1, 1993 Mr. Howard Schaffner Hofeld and Schaffner 30 North LaSalle Street, Suite 3120 Chicago, IL 60602 Dear Mr. Schaffner: This is in response to your October 5 letter requesting interpreta
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=21311
1996 - 03/12/1996 - Scope of logging standard -- 1910.266.
 
March 12, 1996 MEMORANDUM FOR: R. DAVIS LAYNE REGIONAL ADMINISTRATOR FROM: JOHN B. MILES, JR. DIRECTOR DIRECTORATE OF COMPLIANCE PROGRAMS SUBJECT: SCOPE OF LOGGING STANDARD -- 1910.266 This is a resp
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22107
2000 - 10/17/2000 - Clarification of when mechanical equipment can be used on sloped roofs.
 
OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additiona
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=23880
2003 - 01/16/2003 - Acceptable uses of flexible temporary cords/cables on construction sites.
 
January 16, 2003 Mr. Michael J. Powers Encompass Electrical Technologies-Florida Business Region Safety & Training Director 430 West Drive Altamonte Springs, Florida 32714 Re: Whether flexible co
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=24557
2003 - 11/14/2003 - Use of quick disconnect with "pull-down sleeve" to satisfy requirement of a positive means to prevent pneumatic tools from becoming accidentally disconnected.
 
November 14, 2003 John Kurtz Executive Vice President International Staple, Nail and Tool Association 512 West Burlington Avenue, Suite 203 La Grange, Illinois 60525-2245 Re: Use of quick-disconnect
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=24786
Result Page:1 2 forward