Newsletter
RSS Feeds
Print This Page
Text Size
Standard Number > 1926 > 1926.550
- 1926.550 - Annual crane inspections must be conducted by a competent person; no requirement for the inspection to take place within the United States. [10/31/2003]
- 1926.550 - Barge based cranes and 1926.550(g). [05/11/1989]
- 1926.550 - Barricading Swing Radius of Backhoes. [06/13/1977]
- 1926.550 - Barrier device for attachment to mobile equipment. [03/27/1997]
- 1926.550 - Batam crawler C-350 and C-35 machines used only as a tamper. [03/11/1986]
- 1926.550 - Clarification of voltage classification for electric distribution and transmission lines. [10/21/1986]
- 1926.550 - Evaluation of a personal platform enclosure panel. [08/10/2004]
- 1926.550 - Fall protection requirements for employees working over water. [07/25/1989]
- 1926.550 - Girder Lock Overhang Form System. [04/19/1994]
- 1926.550 - Holding & Hoisting Brakes on Hydraulic Cranes [11/22/1991]
- 1926.550 - Hooks on overhaul ball assemblies shall be of a type that can be closed and locked. [01/27/1988]
- 1926.550 - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable. [02/23/2004]
- 1926.550 - Inspection, testing, and operation requirements for Woltman PVE 5021S pile driving equipment. [02/19/2004]
- 1926.550 - Load Chart Posting and Visibility Requirements for Mobile Cranes [11/05/1991]
- 1926.550 - Maintaining a safe working perimeter outside a crane's swing radius. [03/22/1995]
- 1926.550 - Necessary precautions required to prevent entry into a swinging superstructure's radius. [01/16/2003]
- 1926.550 - OSHA requirements applicable to use of the Contex "Magic Arm" below-the-hook lifting device. [01/25/2006]
- 1926.550 - OSHA's construction crane standard does not make a distinction between production and non-production cranes. [08/16/2001]
- 1926.550 - Operating a crane in close proximity to overhead power lines. [12/03/1991]
- 1926.550 - Operation of cranes near powerlines. [03/20/1996]
- 1926.550 - Standards applicable to a barge-mounted stiffleg derrick engaged in the repair and maintenance of a dam site. [04/17/1996]
- 1926.550 - The use of a crane near overhead power lines. [11/01/1993]
- 1926.550 - Whether OSHA standards require employees to be tied off while working over water on an aerial lift. [03/20/2010]
- 1926.550 - Whether under §1926.550, a crane may be left unattended with its spreader bar suspended; where in §1926.550 of Subpart N, other than in §1926.550(g), is the use of tag lines referenced; how are "cable lugs" used under §1926.351(b)(3). [11/27/2007]
- 1926.550(a) - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable. [02/23/2004]
- 1926.550(a) - Inspection, testing, and operation requirements for Woltman PVE 5021S pile driving equipment. [02/19/2004]
- 1926.550(a) - Necessary precautions required to prevent entry into a swinging superstructure's radius. [01/16/2003]
- 1926.550(a)(1) - Crane overload tests must be performed according to the manufacturers specifications and limitations. [11/10/1993]
- 1926.550(a)(5) - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable. [02/23/2004]
- 1926.550(a)(5) - Inspection of cranes used at a construction site. [02/01/1993]
- 1926.550(a)(6) - Aerial lifts and digger derricks used by utility companies. [04/26/1977]
- 1926.550(a)(6) - Annual crane inspections must be conducted by a competent person; no requirement for the inspection to take place within the United States. [10/31/2003]
- 1926.550(a)(6) - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable. [02/23/2004]
- 1926.550(a)(6) - Inspection of cranes used at a construction site. [02/01/1993]
- 1926.550(a)(9) - Barricade in accessible areas of the rear of the rotating structure of the crane secured to the under carriage. [04/17/1980]
- 1926.550(a)(9) - Necessary precautions required to prevent entry into a swinging superstructure's radius. [01/16/2003]
- 1926.550(a)(9) - Request for variance from standard on Cranes and Derricks [09/20/1991]
- 1926.550(a)(9) - Use of audible alarms in lieu of physical barriers. [08/13/1976]
- 1926.550(a)(9) - Use of caution tape or rope to barricade a crane's swing radius; guarding of lug connectors on portable welders. [03/10/2004]
- 1926.550(a)(14)(i) - Clarification of crane fire extinguisher requirements. [04/30/1975]
- 1926.550(a)(15) - Operating backhoes and mobile equipment. [07/21/1992]
- 1926.550(a)(15) - Operation of a crane in close proximity to overhead power lines. [02/08/1994]
- 1926.550(a)(15) - Protection of workers operating mechanical equipment near overhead power lines. [12/07/1999]
- 1926.550(a)(15) - Use of manufacturer-applied insulation coating as an insulation barrier; use of equipment within the minimum approach distance with insulation barriers. [08/09/2004]
- 1926.550(a)(15)(i) - Employee protection for work over energized lines. [04/22/1975]
- 1926.550(a)(17) - Inspection, testing, and operation requirements for Woltman PVE 5021S pile driving equipment. [02/19/2004]
- 1926.550(a)(19) - Alloy steel chain slings must not be loaded beyond working load limit. [08/04/2000]
- 1926.550(a)(19) - Employee hand placement on and around suspended crane loads. [10/21/1999]
- 1926.550(a)(19) - Whether a multiple lift of pre-cast concrete members is permissible. [04/03/2009]
- 1926.550(b) - Crawler cranes used in construction work and back-up alarms. [01/28/1976]
- 1926.550(b) - Inspection, testing, and operation requirements for Woltman PVE 5021S pile driving equipment. [02/19/2004]
- 1926.550(b)(2) - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable. [02/23/2004]
- 1926.550(b)(2) - Inspection, testing, and operation requirements for Woltman PVE 5021S pile driving equipment. [02/19/2004]
- 1926.550(b)(2) - OSHA's construction crane standard does not make a distinction between production and non-production cranes. [08/16/2001]
- 1926.550(b)(2) - Request for interpretation for riding blocks on oilfield drill rigs.;Request for interpretation for riding blocks on oilfield drill rigs. [08/07/1975]
- 1926.550(b)(2) - Whether under §1926.550, a crane may be left unattended with its spreader bar suspended; where in §1926.550 of Subpart N, other than in §1926.550(g), is the use of tag lines referenced; how are "cable lugs" used under §1926.351(b)(3). [11/27/2007]
- 1926.550(c) - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable. [02/23/2004]
- 1926.550(d) - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable. [02/23/2004]
- 1926.550(e) - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable. [02/23/2004]
- 1926.550(f) - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable. [02/23/2004]
- 1926.550(f)(1)(iv) - De minimis violations are not included in a citation. [01/27/1994]
- 1926.550(g) - Application of CPL 2-1.29, Interim Inspection Procedures during Communication Tower Construction Activities. [04/25/2001]
- 1926.550(g) - Compliance for crane hoisted personnel platforms. [07/22/1996]
- 1926.550(g) - Hazards associated with drilled foundation activities. [05/11/1992]
- 1926.550(g) - Hoisting workers on crane load lines (boatswains' chair). [05/22/1998]
- 1926.550(g) - OSHA enforcement of Safety and Health requirements which apply to bungee jumping from cranes. [05/25/1995]
- 1926.550(g) - Suspended personnel platforms. [02/17/1993]
- 1926.550(g) - Use of crane or derrick suspended personnel platforms [02/18/1992]
- 1926.550(g) - Whether under §1926.550, a crane may be left unattended with its spreader bar suspended; where in §1926.550 of Subpart N, other than in §1926.550(g), is the use of tag lines referenced; how are "cable lugs" used under §1926.351(b)(3). [11/27/2007]
- 1926.550(g) - Wire rope clips on suspension scaffolds; safety latches on large crane hooks; order of assembly for hanging scaffolds; and horizontal lifeline design. [03/04/2004]
- 1926.550(g)(2) - Application of CPL 2-1.29, Interim Inspection Procedures during Communication Tower Construction Activities. [04/25/2001]
- 1926.550(g)(2) - Hoisting workers on crane load lines (boatswains' chair). [05/22/1998]
- 1926.550(g)(3)(ii)(C) - Failures with anti-two blocking devices [09/30/1991]
- 1926.550(g)(3)(ii)(D) - Crane equipped with a torque converter. [06/12/1990]
- 1926.550(g)(4) - Use of Cranes to Lift Personnel in Drilled Pier Operations [01/28/1992]
- 1926.550(g)(4)(ii) - Evaluation of a personal platform enclosure panel. [08/10/2004]
- 1926.550(g)(4)(iv)(B) - Wire rope clips on suspension scaffolds; safety latches on large crane hooks; order of assembly for hanging scaffolds; and horizontal lifeline design. [03/04/2004]
- 1926.550(g)(6)(vii) - Whether OSHA standards require employees to be tied off while working over water on an aerial lift. [03/20/2010]
- 1926.550(g)(6)(viii) - Hoisting workers on crane load lines (boatswains' chair). [05/22/1998]
- 1926.550(g)(6)(viii) - Numerous clarifications regarding underground construction;variances; joint ventures. [05/28/1998]