Newsletter
RSS Feeds
Print This Page
Text Size
Standard Number > 1926 > 1926.449
- 1926.449 - "Approved" and "Acceptable" equipment has been determined to be safe by a qualified electrical testing laboratory. [01/07/1992]
- 1926.449 - Acceptable uses of flexible temporary cords/cables on construction sites. [01/16/2003]
- 1926.449 - All electric tools need to be tested by a qualified national testing laboratory and be listed and labeled. [01/28/1994]
- 1926.449 - Applicable standards to protect employees, not engaged in electrical work, operating an aerial lift within 10 feet of overhead electrical lines. [09/25/2001]
- 1926.449 - Approval of temporary power for a construction site. [01/08/1992]
- 1926.449 - Hoists for suspension scaffolds must be tested by a qualified testing laboratory. [01/16/2001]
- 1926.449 - Laboratory testing requirements for hand-held electrical construction tools. [12/12/1986]
- 1926.449 - Portable and vehicle mounted generators must be "approved" on the job site. [06/28/1993]
- 1926.449 - Repair requirements for the cord plug (attachment plug) of double-insulated tools. [05/19/2003]
- 1926.449 - Temporary lighting branch circuits. [09/24/1987]
- 1926.449 - Tunnel boring machine equipment. [12/09/1993]
- 1926.449 - Use of approved GFCI's that do not have open-neutral protection. [07/07/2003]
- 1926.449 - Whether an employer can repair an extension cord under 29 CFR 1926, Subpart K. [04/12/2010]
- 1926.449 - Whether electric hand tools disassembled and deemed irreparable by a tool repair service are required to be returned disassembled. [03/16/2009]