Newsletter
RSS Feeds
Print This Page
Text Size
Standard Number > 1926 > 1926.403
- 1926.403 - "Approved" and "Acceptable" equipment has been determined to be safe by a qualified electrical testing laboratory. [01/07/1992]
- 1926.403 - Acceptability of heat shrinkable insulating covers in making splices. [07/16/1986]
- 1926.403 - Approval of Portable Generators by a qualified testing laboratory. [10/01/1991]
- 1926.403 - Portable and vehicle mounted generators must be "approved" on the job site. [06/28/1993]
- 1926.403 - Relevance of NFPA 70E industry consensus standard to OSHA requirements; whether OSHA requirements apply to owners. [07/25/2003]
- 1926.403 - Repair requirements for the cord plug (attachment plug) of double-insulated tools. [05/19/2003]
- 1926.403 - Whether electric hand tools disassembled and deemed irreparable by a tool repair service are required to be returned disassembled. [03/16/2009]
- 1926.403 - Whether extension cords may be repaired and returned to use. [04/04/2010]
- 1926.403(a) - All electric tools need to be tested by a qualified national testing laboratory and be listed and labeled. [01/28/1994]
- 1926.403(a) - Approval of temporary power for a construction site. [01/08/1992]
- 1926.403(a) - Clarification of revised Subpart K, Electrical Standard for Construction, 1926.403(a). [09/24/1987]
- 1926.403(a) - Contractor shop-made extension cords. [03/03/1992]
- 1926.403(a) - Electric power tools: grounding, NRTL approval, and suitable circuit connection. [06/12/2000]
- 1926.403(a) - Repair requirements for the cord plug (attachment plug) of double-insulated tools. [05/19/2003]
- 1926.403(a) - Tunnel boring machine equipment. [12/09/1993]
- 1926.403(a) - Use of caution tape or rope to barricade a crane's swing radius; guarding of lug connectors on portable welders. [03/10/2004]
- 1926.403(a) - Using electrical tape to repair minor damage to the outer jacket of an extension cord. [12/16/1998]
- 1926.403(a) - Whether electric hand tools disassembled and deemed irreparable by a tool repair service are required to be returned disassembled. [03/16/2009]
- 1926.403(a) - Whether extension cords may be repaired and returned to use. [04/04/2010]
- 1926.403(b)(1) - Maximum allowable distance between supports for temporary electrical wiring. [05/13/2004]
- 1926.403(b)(1)(i) - Acceptable job-made extension cords. [06/17/1992]
- 1926.403(b)(1)(i) - Contractor shop-made extension cords. [03/03/1992]
- 1926.403(e) - Using electrical tape to repair minor damage to the outer jacket of an extension cord. [12/16/1998]
- 1926.403(g) - Contractor shop-made extension cords. [03/03/1992]
- 1926.403(h) - Relevance of NFPA 70E industry consensus standard to OSHA requirements; whether OSHA requirements apply to owners. [07/25/2003]
- 1926.403(i)(2)(i) - Use of caution tape or rope to barricade a crane's swing radius; guarding of lug connectors on portable welders. [03/10/2004]