Newsletter
RSS Feeds
Print This Page
Text Size
Standard Number > 1926 > 1926.32
- 1926.32 - Certification of aerial lift operators. [10/23/1992]
- 1926.32 - Clarification of Competent and Qualified Person, as it Relates to Subpart P. [02/21/1986]
- 1926.32 - Clarification of the OSHA standard 1926.32 addressing competent persons at construction sites. [08/31/1995]
- 1926.32 - Clarification of the term "approved". [07/19/1989]
- 1926.32 - Construction vs. Maintenance. [08/11/1994]
- 1926.32 - Guarding requirements for a rotary pneumatic angle-drive hand-held tool. [12/11/2001]
- 1926.32 - Inspection of cranes used at a construction site. [02/01/1993]
- 1926.32 - Keller ladder proper set up. [12/01/1993]
- 1926.32 - Rear fly extension ladders manufactured by Keller Industries. [04/16/1992]
- 1926.32 - Requirements for load-testing and marking of special custom-design rigging accessories; applicability of ASME standards. [02/09/2004]
- 1926.32 - Rules addressing competent persons and qualified persons. [04/15/1992]
- 1926.32 - Use of crane or derrick suspended personnel platforms accessing a worksite. [12/06/1991]
- 1926.32(f) - Aerial lifts and digger derricks used by utility companies. [04/26/1977]
- 1926.32(f) - Clarification of the terms "hole" versus "unprotected sides or edges." [08/14/2000]
- 1926.32(f) - Clarification on several issues regarding OSHA's construction industry standards for fall protection. [12/18/2003]
- 1926.32(f) - Identification, inspection, and marking of cranes when manufacturer-supplied identifications are unavailable. [02/23/2004]
- 1926.32(f) - Requirements of 1926.404(b)(1) application to 208-volt branch circuits; electrical subcontractor requirements under 1926.404(b)(1) to monitor other on-site subcontractors. [02/07/2005]
- 1926.32(f) - Training requirements for powder-actuated tools under §1926.302(e). [03/10/2006]
- 1926.32(g) - Clarification of maintenance vs. construction activities; standards applicable to the removal and replacement of steel tanks and structural steel supports. [11/18/2003]
- 1926.32(g) - Guarding requirements for a rotary pneumatic angle-drive hand-held tool. [12/11/2001]
- 1926.32(q) - Requirements for load-testing and marking of special custom-design rigging accessories; applicability of ASME standards. [02/09/2004]