Newsletter
RSS Feeds
Print This Page
Text Size
Standard Number > 1926 > 1926.1053
- 1926.1053 - Applicable regulations to a metal cable ladder that is similar to a Jacob's Ladder. [11/03/2003]
- 1926.1053 - Clarification on when a trestle ladder would be considered a stepladder. [01/03/2012]
- 1926.1053 - Construction standards for equipment such as Shuttle Buggy. [05/23/2001]
- 1926.1053 - Fall protection requirements for an employee working from a ladder on a walking/working surface other than the ground. [05/21/2003]
- 1926.1053 - Letter of compliance for a ladder stand-off with handrails device. [10/05/1995]
- 1926.1053 - OSHA compliance of Terra Flex stair system (models L-400 and A-500). [05/23/2001]
- 1926.1053 - OSHA's fixed ladder requirements do not apply to vehicle-mounted fixed ladders. [02/05/2001]
- 1926.1053 - OSHA's requirements for enclosed hardware used in 'third rail' ladder safety devices for towers. [08/07/1997]
- 1926.1053 - Portable ladders not extending 3 feet above upper landing must be secured. [02/26/2004]
- 1926.1053 - Requirements for use of ladder hoisting wheels. [06/02/1998]
- 1926.1053 - Ridge hook-supported ladders. [03/07/1997]
- 1926.1053 - Specialty Ladders Used in Manholes [08/03/1992]
- 1926.1053 - The upper rails and end caps of self-supporting ladders are not required to be slip-resistant. [05/03/2004]
- 1926.1053 - Use of fixed ladders constructed prior to the effective date of 29 CFR 1926 — Subpart X. [09/05/2006]
- 1926.1053 - Using a stepladder as a non-self-supporting ladder. [01/21/2010]
- 1926.1053 - Whether 29 CFR 1926.1053(a)(18) and 1926.1053(a)(19) apply to an attachable ladder used on scaffolding. [04/25/2006]
- 1926.1053 - Whether a concrete form panel with horizontal ribs meets the requirements in Part 1926 Subpart X for fixed ladders. [06/12/2006]
- 1926.1053(a) - Applicable regulations to a metal cable ladder that is similar to a Jacob's Ladder. [11/03/2003]
- 1926.1053(a)(1) - Applicability of OSHA's ladder standard, 29 CFR Part 1926 Subpart X to a particular situation. [07/18/2002]
- 1926.1053(a)(1)(i) - Modifying a ladder for loads in excess of manufacturer's rated capacity. [06/18/1993]
- 1926.1053(a)(1)(ii) - Applicability of OSHA's ladder standard, 29 CFR Part 1926 Subpart X to a particular situation. [07/18/2002]
- 1926.1053(a)(1)(ii) - Modifying a ladder for loads in excess of manufacturer's rated capacity. [06/18/1993]
- 1926.1053(a)(2) - Using a stepladder as a non-self-supporting ladder. [01/21/2010]
- 1926.1053(a)(4)(i) - Use of fixed ladders constructed prior to the effective date of 29 CFR 1926 — Subpart X. [09/05/2006]
- 1926.1053(a)(6)(i) - Metal ladder rungs are required to be skid-resistant. [10/09/1992]
- 1926.1053(a)(6)(i) - Use of fixed ladders constructed prior to the effective date of 29 CFR 1926 — Subpart X. [09/05/2006]
- 1926.1053(a)(13) - Minimum toe clearance for workers using manhole rungs during construction work. [02/13/2004]
- 1926.1053(a)(13) - Requirements for attachable scaffold ladders used in construction; toe-hold minimum distance requirement. [11/17/2003]
- 1926.1053(a)(13) - Whether a concrete form panel with horizontal ribs meets the requirements in Part 1926 Subpart X for fixed ladders. [06/12/2006]
- 1926.1053(a)(18) - Fall protection requirements for fixed and portable ladders in construction. [01/13/2000]
- 1926.1053(a)(18) - Maintenance vs. construction; working from fixed ladders. [05/11/1999]
- 1926.1053(a)(18) - Use of fixed ladders constructed prior to the effective date of 29 CFR 1926 — Subpart X. [09/05/2006]
- 1926.1053(a)(18) - Whether 29 CFR 1926.1053(a)(18) and 1926.1053(a)(19) apply to an attachable ladder used on scaffolding. [04/25/2006]
- 1926.1053(a)(19) - Compliance of automatically retractable rest platforms used with self-retracting lifelines for meeting requirements for fixed ladder safety equipment. [12/06/2004]
- 1926.1053(a)(19) - Fall protection requirements for fixed and portable ladders in construction. [01/13/2000]
- 1926.1053(a)(19) - Maintenance vs. construction; working from fixed ladders. [05/11/1999]
- 1926.1053(a)(19) - Use of fixed ladders constructed prior to the effective date of 29 CFR 1926 — Subpart X. [09/05/2006]
- 1926.1053(a)(19) - Whether 29 CFR 1926.1053(a)(18) and 1926.1053(a)(19) apply to an attachable ladder used on scaffolding. [04/25/2006]
- 1926.1053(a)(19)(i) - Compliance of automatically retractable rest platforms used with self-retracting lifelines for meeting requirements for fixed ladder safety equipment. [12/06/2004]
- 1926.1053(a)(19)(ii) - Compliance of automatically retractable rest platforms used with self-retracting lifelines for meeting requirements for fixed ladder safety equipment. [12/06/2004]
- 1926.1053(a)(19)(iii) - Compliance of automatically retractable rest platforms used with self-retracting lifelines for meeting requirements for fixed ladder safety equipment. [12/06/2004]
- 1926.1053(b) - Portable ladders. [04/02/1996]
- 1926.1053(b) - Use of ladders positioned against columns [12/06/1991]
- 1926.1053(b) - Whether OSHA requirements prohibit working from a portable stepladder and, if not, whether fall protection is required. 29 CFR 1926.1053(b). [11/28/2007]
- 1926.1053(b)(1) - Applicability of scaffold fall protection to guardrails near ladder access areas on scaffolds; toeboards across ladder access areas. [06/20/2005]
- 1926.1053(b)(1) - General requirements of ladders [05/12/1975]
- 1926.1053(b)(1) - Ladders extending more than 36 inches above the landing do not need to have the rungs above the landing removed so as to facilitate employees stepping between the side rails. [04/07/1975]
- 1926.1053(b)(1) - Portable ladders not extending 3 feet above upper landing must be secured. [02/26/2004]
- 1926.1053(b)(1) - Rail extensions for a portable ladder;step-through ladder device. [12/22/2005]
- 1926.1053(b)(1) - The use of cable hook assemblies, pole grip assemblies, or adjustable levelers on fiberglass extension ladders used in construction. [03/16/2009]
- 1926.1053(b)(3) - OSHA Guidance concerning use of clip on products for ladders to facilitate transport of the ladder or other objects. [04/26/2002]
- 1926.1053(b)(3) - The use of cable hook assemblies, pole grip assemblies, or adjustable levelers on fiberglass extension ladders used in construction. [03/16/2009]
- 1926.1053(b)(3) - Whether OSHA requirements prohibit working from a portable stepladder and, if not, whether fall protection is required. 29 CFR 1926.1053(b). [11/28/2007]
- 1926.1053(b)(4) - Maintenance vs. construction; working from fixed ladders. [05/11/1999]
- 1926.1053(b)(4) - OSHA Guidance concerning use of clip on products for ladders to facilitate transport of the ladder or other objects. [04/26/2002]
- 1926.1053(b)(4) - Using a stepladder as a non-self-supporting ladder. [01/21/2010]
- 1926.1053(b)(4) - Whether OSHA requirements prohibit working from a portable stepladder and, if not, whether fall protection is required. 29 CFR 1926.1053(b). [11/28/2007]
- 1926.1053(b)(5)(i) - Portable ladders. [04/02/1996]
- 1926.1053(b)(5)(i) - Use of temporary vertical ladders. [03/16/1993]
- 1926.1053(b)(5)(iii) - Applicable regulations to a metal cable ladder that is similar to a Jacob's Ladder. [11/03/2003]
- 1926.1053(b)(6) - The use of cable hook assemblies, pole grip assemblies, or adjustable levelers on fiberglass extension ladders used in construction. [03/16/2009]
- 1926.1053(b)(7) - The meaning of standards can only be modified through the rulemaking process, not through a letter of interpretation. [06/02/2004]
- 1926.1053(b)(7) - The upper rails and end caps of self-supporting ladders are not required to be slip-resistant. [05/03/2004]
- 1926.1053(b)(7) - The use of cable hook assemblies, pole grip assemblies, or adjustable levelers on fiberglass extension ladders used in construction. [03/16/2009]
- 1926.1053(b)(8) - The use of extension cord while working from scissor lift; requirement to secure or barricade a ladder. [05/27/2004]
- 1926.1053(b)(9) - The use of cable hook assemblies, pole grip assemblies, or adjustable levelers on fiberglass extension ladders used in construction. [03/16/2009]
- 1926.1053(b)(10) - The use of cable hook assemblies, pole grip assemblies, or adjustable levelers on fiberglass extension ladders used in construction. [03/16/2009]
- 1926.1053(b)(12) - Applicable regulations to a metal cable ladder that is similar to a Jacob's Ladder. [11/03/2003]
- 1926.1053(b)(13) - Clarification on when a trestle ladder would be considered a stepladder. [01/03/2012]
- 1926.1053(b)(13) - Whether OSHA requirements prohibit working from a portable stepladder and, if not, whether fall protection is required. 29 CFR 1926.1053(b). [11/28/2007]
- 1926.1053(b)(22) - Loads carried by persons climbing or descending a ladder. [04/02/1992]