Newsletter
RSS Feeds
Print This Page
Text Size
Standard Number > 1910 > 1910.399
- 1910.399 - Acceptability of locking switches in the closed (on) position for transformers attached to the main bus duct system. [04/05/2004]
- 1910.399 - Acceptability of modifying a standard on/off switch to provide lockout capability to a machine. [05/13/2003]
- 1910.399 - Acceptability of using a light switch as a disconnecting means for the electrical lockout/tagout standard. [10/27/2005]
- 1910.399 - All electrical equipment must be approved. [08/24/1993]
- 1910.399 - Applicability of OSHA's LOTO standards; isolation and verification procedures. [11/16/2000]
- 1910.399 - Applicable OSHA standards and safety considerations for microwave device use in a laboratory. [08/08/2002]
- 1910.399 - Approval of employee-furnished equipment for use in hazardous locations; definition of "electric utilization equipment." [07/24/2006]
- 1910.399 - Approval requirements for replacement, modification, repair, or rehabilitation of electrical utilization equipment. [08/10/2005]
- 1910.399 - Certification of manufactured products intended for use in the workplace. [12/14/1994]
- 1910.399 - Clarification of the OSHA standards applicable to H. VIR (inspection) Windows installed in electrical equipment enclosures. [01/14/1997]
- 1910.399 - Electrical Conductor Identification. [12/18/1997]
- 1910.399 - Electrical equipment approved by a NRTL is acceptable to OSHA. [05/11/2004]
- 1910.399 - Electrical equipment grounding requirements on concrete floors. [11/26/2003]
- 1910.399 - Electrical safety requirements for rechargeable racks for paging transmitters. [05/12/2003]
- 1910.399 - Electrical standards as it applies to desktop computers. [02/18/1992]
- 1910.399 - Fixed Wiring in Research Facilities and High Voltage Cable Tray Systems at Department of Energy (DOE) Research Laboratories [03/31/2004]
- 1910.399 - Grounding requirements with respect to a battery charger used with rechargeable power tools. [03/12/1996]
- 1910.399 - Installation and use of electrical equipment must be consistent with NRTL intructions for that equipment. [08/26/2003]
- 1910.399 - Interpretation concerning dry type 5-15 kv transformers and definitions of the terms "acceptable" and "special equipment". [01/09/1989]
- 1910.399 - Nationally recognized testing laboratories evaluate safety features of electrical devices. [07/16/1985]
- 1910.399 - Repair/Rebuilding of UL Listed Equipment for Hazardous Locations. [07/05/1990]
- 1910.399 - Testing equipment for use in potentially hazardous environments. [10/29/1986]
- 1910.399 - The Canadian Standards Association, a nationally recognized testing laboratory, marking and double insulated tools. [09/01/1995]
- 1910.399 - The definition of 'Readily accessible' does not necessarily preclude the locking of electrical panels, provided those needing ready access are provided a key or lock combination. [10/24/2005]
- 1910.399 - The listing requirements in the U.S. for Industrial Packaging equipment. [02/28/1990]
- 1910.399 - The use of Maxon-CS-0520-HD VHF transceivers. [10/08/1991]
- 1910.399 - Use of general protective equipment and tools by employees when working near exposed energized conductors or circuit parts in the workplace. [12/27/1991]
- 1910.399 - Use of personal cooling fans listed for "residential use only" in an industrial setting. [02/01/2005]
- 1910.399 - Use of portable vacuum cleaners for cleaning up aluminum and wood dust. [08/22/2003]
- 1910.399 - Variance request. [06/07/1995]