Newsletter
RSS Feeds
Print This Page
Text Size
Standard Number > 1910 > 1910.27
- 1910.27 - Building and selling a fixed ladder with cage, using a hinged rest platform and advertising the product with the notation that it "complies with OSHA requirements." [04/25/1983]
- 1910.27 - Cages installed on fixed ladders. [05/03/1978]
- 1910.27 - Clarification of OSHA guidance concerning the uniform spacing of steps or rungs in sanitary and storm sewer manholes. [01/10/1979]
- 1910.27 - Clarification of Section 1910.268 Telecommunications. [02/26/1996]
- 1910.27 - Clarification of a fixed ladder requirement. [12/02/1981]
- 1910.27 - Clarification on OSHA's enforcement policy for fixed ladders. [11/08/2007]
- 1910.27 - Climbing structural members is a recognized hazard and prohibited. [04/15/1977]
- 1910.27 - Conveyor Crossover Stile. [04/22/1996]
- 1910.27 - Enforcement of 1910.27 Fixed Ladders. [10/19/1976]
- 1910.27 - Enforcement of manhole step specification requirements during rulemaking proceedings. [06/24/2003]
- 1910.27 - Fixed Ladder Used For Emergency Egress Only. [05/17/1978]
- 1910.27 - Fixed industrial stair requirements for access to secondary containment structures surrounding bulk chemical storage tanks. [12/10/2003]
- 1910.27 - Fixed ladder requirements for ski lift towers. [06/02/1999]
- 1910.27 - Fixed ladder requirements. [03/05/1981]
- 1910.27 - Fixed ladders must be retrofitted to meet 1910.27 design requirements; maximum horizontal spacing requirements for extensions. [05/27/2004]
- 1910.27 - Guarding of Access Openings to Fixed Ladders. [09/29/2009]
- 1910.27 - Information on fixed ladders and cages. [12/04/1978]
- 1910.27 - Instruction and warning labels for ladders. [07/25/1983]
- 1910.27 - Ladder safety requirements for towers more than 20 feet in length: sliding fall protection devices, safety cages/wells, landing platform intervals. [10/05/2004]
- 1910.27 - Landing platform requirement for fixed ladder with continuous climb of 62 feet. [04/19/2006]
- 1910.27 - Landing platforms for fixed ladders. [07/23/1998]
- 1910.27 - Maximum intervals for providing fixed-ladder landing platforms used in General Industry. [07/02/2003]
- 1910.27 - OSHA concurrence on the use of 3/4" square bars for rungs on fixed ladders. [09/08/1978]
- 1910.27 - OSHA requirements on fixed ladders relating to communication towers. [02/20/1981]
- 1910.27 - OSHA standard for rung spacing on fixed industrial ladders and PPE in powered industrial vehicle battery changing. [04/02/1997]
- 1910.27 - OSHA standards on fixed ladders and landing platforms to be used in underground chambers for pumping stations. [01/04/1980]
- 1910.27 - OSHA's Fixed Ladders and Safety Cages standard. [06/25/1997]
- 1910.27 - OSHA's requirements for enclosed hardware used in 'third rail' ladder safety devices for towers. [08/07/1997]
- 1910.27 - Platforms and ladders on communication towers. [03/26/1993]
- 1910.27 - Railroad tankcars off-loading points at an industrial facility. [11/14/1996]
- 1910.27 - Requirements for clearances behind permanently installed vertical ladders in elevator pits. [12/02/1991]
- 1910.27 - Requirements for manhole steps. [12/02/1980]
- 1910.27 - Requirements for step-through fixed ladder side rails that might be used as climbing aid. [08/08/2005]
- 1910.27 - Safety concerns at Montana ski areas and OSHA standards for fixed ladders. [03/07/1995]
- 1910.27 - Separate line for a full body harness [04/04/1991]
- 1910.27 - Specialty Ladders Used in Manholes [08/03/1992]
- 1910.27 - Standards applicable to step bolts and manhole steps; load requirements for step bolts. [05/05/2003]
- 1910.27 - Structural steel angles for cleats on fixed ladders. [06/23/1977]
- 1910.27 - The acceptability of manhole entries through concentric cone or eccentric cone concrete pipe transition sections to underground workplaces. [05/13/1986]
- 1910.27 - The use of ship's stairs instead of fixed stairs in general industry. [02/10/2006]
- 1910.27 - Use of cages, wells, and personal fall protection systems to protect against falls from fixed ladders. [02/10/2006]
- 1910.27(a)(1) - OSHA concurrence on the use of 3/4" square bars for rungs on fixed ladders. [09/08/1978]
- 1910.27(b)(1) - Fall protection requirements when working from ladders in the telecommunications industry. [05/23/2005]
- 1910.27(b)(1)(i) - OSHA concurrence on the use of 3/4" square bars for rungs on fixed ladders. [09/08/1978]
- 1910.27(b)(1)(ii) - Rung spacing for fixed ladders. [02/21/1982]
- 1910.27(b)(1)(ii) - Rung spacing for fixed ladders. [03/20/1975]
- 1910.27(b)(1)(ii) - Rung spacing for fixed ladders. [11/27/1981]
- 1910.27(b)(1)(iii) - De minimis notices for ladders with rung lengths that do not comply with the Fixed Ladders standard. [07/28/1975]
- 1910.27(b)(1)(iii) - Rung spacing for fixed ladders. [11/27/1981]
- 1910.27(b)(2) - Requirements for step-through fixed ladder side rails that might be used as climbing aid. [08/08/2005]
- 1910.27(c)(1) - Head clearance requirements for fixed ladders used on FAA radio communication towers. [05/17/1990]
- 1910.27(c)(3) - Fall protection requirements when working from ladders in the telecommunications industry. [05/23/2005]
- 1910.27(c)(7) - Application of hatch covers to the Bilco Type "S" Roof Scuttle. [11/09/1999]
- 1910.27(c)(7) - Fall protection requirements when working from ladders in the telecommunications industry. [05/23/2005]
- 1910.27(c)(7) - Open roof hatches should be protected; grab bars not required at hatch exits. [07/12/2000]
- 1910.27(d)(1) - "Equivalent construction" of cages or wells; cages for 30' straight ladders. [09/04/1974]
- 1910.27(d)(1)(i) - Clarification on OSHA's enforcement policy for fixed ladders. [11/08/2007]
- 1910.27(d)(1)(i) - Fixed ladders must be retrofitted to meet 1910.27 design requirements; maximum horizontal spacing requirements for extensions. [05/27/2004]
- 1910.27(d)(1)(ii) - Clarification on OSHA's enforcement policy for fixed ladders. [11/08/2007]
- 1910.27(d)(1)(ii) - Fixed ladder requirements for ski lift towers. [06/02/1999]
- 1910.27(d)(1)(ii) - Fixed ladders must be retrofitted to meet 1910.27 design requirements; maximum horizontal spacing requirements for extensions. [05/27/2004]
- 1910.27(d)(1)(ii) - Ladder safety requirements for towers more than 20 feet in length: sliding fall protection devices, safety cages/wells, landing platform intervals. [10/05/2004]
- 1910.27(d)(1)(vi) - OSHA fixed ladder requirements. [10/31/1979]
- 1910.27(d)(2) - Considerations for using a continuous-climb fixed ladder on a steel stack instead of ladder cages and platforms. [09/30/2002]
- 1910.27(d)(2) - Fall protection requirements when working from ladders in the telecommunications industry. [05/23/2005]
- 1910.27(d)(2) - Fixed ladder protection and safe entry into storm sewer manholes. [10/09/1984]
- 1910.27(d)(2) - Hinged rest platforms cannot be used for fixed ladders. [02/25/1983]
- 1910.27(d)(2) - Ladder safety requirements for towers more than 20 feet in length: sliding fall protection devices, safety cages/wells, landing platform intervals. [10/05/2004]
- 1910.27(d)(2) - Landing platform requirement for fixed ladder with continuous climb of 62 feet. [04/19/2006]
- 1910.27(d)(2) - Landing platforms for fixed ladders. [07/23/1998]
- 1910.27(d)(2) - Maximum intervals for providing fixed-ladder landing platforms used in General Industry. [07/02/2003]
- 1910.27(d)(2) - Use of ladder and safety devices in lieu of platforms. [07/19/2002]
- 1910.27(d)(3) - Fall protection requirements when working from ladders in the telecommunications industry. [05/23/2005]
- 1910.27(d)(4) - Fall protection requirements when working from ladders in the telecommunications industry. [05/23/2005]
- 1910.27(d)(5) - Clarification on OSHA's enforcement policy for fixed ladders. [11/08/2007]
- 1910.27(d)(5) - Considerations for using a continuous-climb fixed ladder on a steel stack instead of ladder cages and platforms. [09/30/2002]
- 1910.27(d)(5) - Fixed ladder protection and safe entry into storm sewer manholes. [10/09/1984]
- 1910.27(d)(5) - Fixed ladder requirements for ski lift towers. [06/02/1999]
- 1910.27(d)(5) - Ladder safety requirements for towers more than 20 feet in length: sliding fall protection devices, safety cages/wells, landing platform intervals. [10/05/2004]
- 1910.27(d)(5) - Safety devices on fixed ladders. [03/18/1976]
- 1910.27(d)(5) - Use of ladder and safety devices in lieu of platforms. [07/19/2002]