Newsletter
RSS Feeds
Print This Page
Text Size
NOTICE: This is an OSHA Archive Document, and no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only. Return to current Interpretations.
Standard Number > 1910 > 1910.147
- 1910.147 - Applicablility of the lockout/tagout standards. [09/09/1993]
- 1910.147 - Article in Magazine Containing Incorrect Information About Lockout/Tagout Requirements. [09/04/1991]
- 1910.147 - Authorized employees and periodic lockout/tagout inspections. [08/05/1994]
- 1910.147 - Certain provisions of the Occupational Safety and Health Administration's (OSHA's) lockout/tagout standard. [09/19/1995]
- 1910.147 - Clarification of the Control of Hazardous Energy (Lockout/Tagout) Standard. [07/26/1994]
- 1910.147 - Clarification on the USPS's lockout/tagout procedures and minor servicing operations for the multiple line optical character recognition sorter. [06/11/2003]
- 1910.147 - Compliance with 1910.147 using the new Block-Out safety product line. [04/04/1991]
- 1910.147 - Concerning the new lockout/tagout standard. [05/01/1990]
- 1910.147 - Confirmation on lockout/tagout, specifically with the standard covering periodic inspections. [07/31/1991]
- 1910.147 - Continued enforcement of Lockout/Tagout Standard [10/21/1991]
- 1910.147 - Control of Hazardous Energy (Lockout/Tagout) standard. [07/07/1994]
- 1910.147 - Control of Hazardous Energy Sources (lockout/tagout). [01/16/1990]
- 1910.147 - Control of Hazardous Energy Sources Lockout/Tagout. [10/15/1990]
- 1910.147 - Control of hazardous energy (lockout/tagout) standard. [06/23/1997]
- 1910.147 - Cord and plug connected electric equipment. [06/30/1993]
- 1910.147 - Electrical safety related work practices standard. [01/07/1992]
- 1910.147 - Energy control devices lockable design requiremnets. [06/24/1992]
- 1910.147 - Enforcement of the Control of Hazardous Energy (LOTO). [10/30/1996]
- 1910.147 - Interpretation of 29 CFR 1910.147 - Lockout Devices. [03/03/1992]
- 1910.147 - Interpretation on the control of hazardous energy (lockout/tagout) standard. [07/28/1995]
- 1910.147 - Interpretation/variance with the energy isolation device requirements. [01/05/1998]
- 1910.147 - Is Lockout/Tagout applicable to television transmission towers. [06/09/1993]
- 1910.147 - LOTO: Use of heavy-duty nylon cable ties as lockout devices in lieu of chains and locks. [12/07/2004]
- 1910.147 - LOTO: minor servicing exemption and the use of a lockable on/off switch as an alternate measure to provide effective protection. [10/20/2004]
- 1910.147 - Lock out/Tag out periodic inspection requirements. [03/09/2004]
- 1910.147 - Lockout/Tagout Citations Against the USDA. [08/14/1995]
- 1910.147 - Lockout/Tagout Citations Against the USDA. [06/13/1995]
- 1910.147 - Lockout/Tagout for circuit breaker blocking and locking devices. [08/30/1991]
- 1910.147 - Lockout/Tagout with regards to the cleanup and sanitizing of machinery and equipment in the meatpacking industry. [07/29/1991]
- 1910.147 - Lockout/Tagout-Corrugated Metal Industry. [11/07/1990]
- 1910.147 - Lockout/tagout as applies to contractor employers with employees at electric power generation, transmission and distribution work sites. [12/23/1992]
- 1910.147 - Lockout/tagout issues: "unexpected energization" and minor servicing operations. [10/05/1999]
- 1910.147 - Lockout/tagout procedures; training; annual inspection; outside personnel. [06/20/1996]
- 1910.147 - Machine guarding. [05/28/1996]
- 1910.147 - Maintenance activities performed in oil and gas production operations. [11/01/1996]
- 1910.147 - Mechanical equipment, such as an unguarded agitator, posing a hazard within a permit space must be locked out or tagged. [03/03/1994]
- 1910.147 - Motor-control-circuit switches and relays are prohibited from being used as energy isolating devices. [07/15/2003]
- 1910.147 - OSHA does not test, approve, certify, or endorse any equipment, product, or procedure, including machine design and risk assessment techniques. [02/10/2005]
- 1910.147 - OSHA policies concerning employees working at home. [01/06/2000]
- 1910.147 - OSHA policies concerning employees working at home. [11/15/1999]
- 1910.147 - Occupational Safety and Health Administration's Bakery Equipment Standard. [07/03/1996]
- 1910.147 - Permit-Required Confined Spaces and Lockout/Tagout. [11/06/1996]
- 1910.147 - Regulations requiring bus maintenance facilities to use safety stands when maintenance personnel are working under buses which have been raised by in-ground or portable vehicle hoists. [06/27/1991]
- 1910.147 - Request for Compliance Assistance on High Profile Case. [04/23/1997]
- 1910.147 - Requirements for developing sufficiently-detailed written procedures for all machinery/equipment lockout/tagout. [01/14/2003]
- 1910.147 - Requirements relating to the operation of a two-spindle reaming/drilling/threading machine in a set-up mode. [10/01/1991]
- 1910.147 - Review of Panduit's lockout/tagout training video. [11/19/1992]
- 1910.147 - The Lockout/Tagout Standard. [09/27/1995]
- 1910.147 - The obligations and responsibilities of machine manufacturers under the lockout/tagout standard. [03/08/1991]
- 1910.147 - Use of automatic equipment for the machining of connecting rods, crankshafts, cylinder heads and engine blocks. [12/06/1991]
- 1910.147 - Whether or not OSHA Standard 1910.147, lockout/tagout would apply to motor vehicles. [05/20/1991]
- 1910.147(a)(2)(ii) - Application of 1910.147 to the change out of a grinding wheel. [10/20/1998]
- 1910.147(a)(2)(ii) - Clarification on the USPS's lockout/tagout procedures and minor servicing operations for the multiple line optical character recognition sorter. [06/11/2003]
- 1910.147(a)(2)(ii) - Coverage of minor machine-servicing activities under the Lockout/Tagout standard. [05/17/2002]
- 1910.147(a)(2)(ii) - LOTO: minor servicing exemption and the use of a lockable on/off switch as an alternate measure to provide effective protection. [10/20/2004]
- 1910.147(a)(2)(ii) - Motor-control-circuit switches and relays are prohibited from being used as energy isolating devices. [07/15/2003]
- 1910.147(a)(2)(ii) - Scenario of a tool change process applied to Lock Out/Tag Out's service and maintenance exception. [06/21/2002]
- 1910.147(a)(2)(iii)(A) - Application of 1910.147 to the change out of a grinding wheel. [10/20/1998]
- 1910.147(a)(2)(iii)(A) - Coverage of minor machine-servicing activities under the Lockout/Tagout standard. [05/17/2002]
- 1910.147(b) - A lock is considered a lockout device. [09/11/2000]
- 1910.147(b) - Energy control procedures must be developed unless eight conditions met. [04/11/2000]
- 1910.147(c) - Hazardous energy control lockout/tagout (LOTO) program documentation and certification requirements. [05/10/2005]
- 1910.147(c)(1) - Motor-control-circuit switches and relays are prohibited from being used as energy isolating devices. [07/15/2003]
- 1910.147(c)(1) - Use of "generic" LOTO procedures in conjunction with "work authorization permits". [11/03/1999]
- 1910.147(c)(2)(iii) - The obligations and responsibilities of machine manufacturers under the lockout/tagout standard. [03/08/1991]
- 1910.147(c)(3) - LOTO: Use of heavy-duty nylon cable ties as lockout devices in lieu of chains and locks. [12/07/2004]
- 1910.147(c)(4) - Hazardous energy control lockout/tagout (LOTO) program documentation and certification requirements. [05/10/2005]
- 1910.147(c)(4) - Lockout/tagout procedures, including work permits and groups of machines/equipment. [08/12/1994]
- 1910.147(c)(4)(i) - Energy control procedures must be developed unless eight conditions met. [04/11/2000]
- 1910.147(c)(4)(ii) - Requirements for developing sufficiently-detailed written procedures for all machinery/equipment lockout/tagout. [01/14/2003]
- 1910.147(c)(5) - "Approval" of flexible corrugated plastic covers and generic circuit breaker panel switch lockouts. [06/28/2000]
- 1910.147(c)(5) - Guidance on approval requirments for general circuit breaker panel swich lockouts in General Industry. [06/24/2002]
- 1910.147(c)(5) - Hazardous energy control lockout/tagout (LOTO) program documentation and certification requirements. [05/10/2005]
- 1910.147(c)(5) - LOTO: Use of heavy-duty nylon cable ties as lockout devices in lieu of chains and locks. [12/07/2004]
- 1910.147(c)(5)(i) - LOTO: Use of heavy-duty nylon cable ties as lockout devices in lieu of chains and locks. [12/07/2004]
- 1910.147(c)(5)(ii)(D) - Identity of employee applying lockout and tagout devices. [03/16/1998]
- 1910.147(c)(6) - Hazardous energy control lockout/tagout (LOTO) program documentation and certification requirements. [05/10/2005]
- 1910.147(c)(6) - Lock out/Tag out periodic inspection requirements. [03/09/2004]
- 1910.147(c)(6) - Required components of a LOTO inspection. [04/06/2001]
- 1910.147(c)(6)(i) - Lock out/Tag out periodic inspection requirements. [03/09/2004]
- 1910.147(c)(6)(i)(B) - Lock out/Tag out periodic inspection requirements. [03/09/2004]
- 1910.147(c)(6)(i)(C) - Lock out/Tag out periodic inspection requirements. [03/09/2004]
- 1910.147(c)(6)(i)(D) - Lock out/Tag out periodic inspection requirements. [03/09/2004]
- 1910.147(c)(7) - Hazardous energy control lockout/tagout (LOTO) program documentation and certification requirements. [05/10/2005]
- 1910.147(c)(7) - Required components of a LOTO inspection. [04/06/2001]
- 1910.147(c)(7)(iii) - Lock out/Tag out periodic inspection requirements. [03/09/2004]
- 1910.147(c)(7)(iv) - Hazardous energy control lockout/tagout (LOTO) program documentation and certification requirements. [05/10/2005]
- 1910.147(c)(7)(iv) - Lock out/Tag out periodic inspection requirements. [03/09/2004]
- 1910.147(d) - Verification procedures for group lockout/tagout. [11/16/1999]
- 1910.147(d)(1) - Requirements for developing sufficiently-detailed written procedures for all machinery/equipment lockout/tagout. [01/14/2003]
- 1910.147(d)(3) - Use of "generic" LOTO procedures in conjunction with "work authorization permits". [11/03/1999]
- 1910.147(f)(3) - Authorized employees may, but are not required to, verify energy isolation in group LO/TO. [10/24/2000]
- 1910.147(f)(3) - Control of Hazardous Energy Sources (Group Lockout/Tagout). [01/29/1991]