Newsletter
RSS Feeds
Print This Page
Text Size
Previous Years > 1982
December
- [12/30/1982] Use of pin connected work platforms on your rough terrain cranes.[1926.556]
- [12/09/1982] Utilization of a Stop Time Measuring Instrument for Verification of Compliance With 29 CFR 1910.217.[1910.217]
- [11/19/1982] The wearing of photo-grey safety lenses.[1910.133]
- [11/16/1982] A clarification of several items in Subpart L of the General Industry Safety and Health Standards.[1910.158]
- [11/15/1982] OSHA telecommunications standards.[1910.268]
- [10/26/1982] Requirements that all walking and working surfaces be kept clean, orderly, and in a sanitary condition.[1910.22]
- [10/22/1982] Wearing of contact lenses while welding.[1910.133(a)(3)]
- [09/28/1982] Clarification of the classification of the aquaculture industries for OSHA enforcement purposes.[1928]
- [09/17/1982] Enforcement criteria for lead monitoring requirements of recirculated air.[1910.1025(e)(4)(ii)]
- [09/01/1982] Interpretation of 1910.157.[1910.157]
- [08/27/1982] Standards for flammable and combustible liquids used in industrial plant mixing operations.[1910.106(e); 1910.106(e)(1)(i)(b); 1910.106(e)(3)]
- [08/20/1982] Personnel Hoists.[1926.552(c)(3)]
- [08/20/1982] Ship's ladders in restricted spaces considered de minimis violations.[1910.24(e)]
- [08/19/1982] OSHA practices in recognizing national testing laboratories.[1910.303(a)]
- [08/18/1982] Revisions of hearing conservation standard under consideration applicable to logging industry.[1910.95(c)]
- [08/06/1982] Eyewash equipment is not an acceptable substitute for protective eyewear.[1910.151(c)]
- [07/28/1982] Provisions for mounting lighting on guardrails.[1910.23(e)(5)(iii)]
- [07/28/1982] Use or powered air purifying respirators for abrasive blasting.[1910.94(a)(1)(ii)]
- [07/28/1982] Standard applies to tank trucks, not towing kettles.[1926.152(g)(2)]
- [07/15/1982] Letter concerning two pneumatic plier straightening presses.[1910.212]
- [07/13/1982] Applicability of the noise standard to pulpwood logging.[1910.95]
- [07/08/1982] Definition of "exposure" under 1910.1020.[1910.1020(c)(8)]
- [07/01/1982] OSHA's position that the main or emergency switches must be capable of being locked out.[1910.179]
- [06/25/1982] Requirements for back up alarms.[1926.601(b)(4); 1926.602(a)(9)(ii)]
- [06/16/1982] The ASME Pressure Vessel Code.[1910.261]
- [06/03/1982] Hearing conservation standard in relation to poultry processing industry.[1910.95(c)]
- [05/21/1982] Clarification on window cleaning operations.[1910.28]
- [05/17/1982] Applicability of the Coal Tar Pitch Volatiles Standard to dust of coal tar pitch.[1910.1002]
- [05/07/1982] The correct testing procedure for tree-trimming saddle belts.[1910.132]
- [05/05/1982] Use of roof top rolling outriggers used for swinging scaffolds.[1926.451(a)(2)]
- [04/29/1982] The employer shall make the appropriate safety footwear available.[1910.266; 1910.132]
- [04/29/1982] Installation of a single stroke mechanism on full revolution mechanical power presses.[1910.217]
- [04/23/1982] The safety of divers.[1910.401; 1926.1071]
- [04/15/1982] Use of dis-similar metals on tube and couplar scaffolds.[1926.451]
- [04/08/1982] Pneumatic tools must be designed and used in accordance with good engineering practices.[1926.302]
- [04/01/1982] Clarification of the intent of 29 CFR 1926.905(h) and (k).[1926.905]
- [03/29/1982] Removing synthetic web slings from service.[1910.184(i)(9); 1910.184(i)(8)]
- [03/26/1982] Question of whether the noise standard is adjusted for workshifts greater than 8 hours.[1910.95]
- [03/22/1982] Sky Genie Boatswain's Chair System.[1926.451]
- [03/18/1982] Clarification of Power Platforms for Exterior Building Maintenance.[1910.66; 1910.28]
- [03/18/1982] Public Law 91-596 pertains to workplace safety and health, and requires employers to provide employment free of recognized hazards and to comply with OSHA's regulations.[1910.212]
- [03/02/1982] Fasteners used in tools shall be only those specifically manufactured for use in such tools.[1926.302]
- [02/26/1982] Request for Interpretation on Applicability of Standards to Water Well Drilling[1910]
- [02/26/1982] The "Power Shift" Model Caterpillar Track Tractors Operating on Inclines in Excess of 30 Degrees Above the Horizontal Plane may Become Hazardous.[1910.267]
- [02/25/1982] Use of skin diving hood under respirator for bearded employee unacceptable.[1910.134(e)(5)(i)]
- [02/21/1982] Rung spacing for fixed ladders.[1910.27(b)(1)(ii)]
- [02/17/1982] Showering requirements of the acrylonitrile standard[1910.1045(m)(2)]
- [02/16/1982] Inside storage requirements for consumer commodities less than 50% alcohol.[1910.106(d)(2)]
- [02/14/1982] Construction electrical safety.[1926.400]
- [02/12/1982] The use of a safety chain in lieu of a gate.[1910.23]
- [02/11/1982] Use of non-flowable material for counter weights in rigging outrigger beams.[1926.451]
- [02/04/1982] Tip-up rigid guardrail system.[1910.23]
- [02/01/1982] Interpretation on construction standard for lasers.[1926.54]
- [01/29/1982] Case Davis-Maxi Sneaker.[1926.602]
- [01/28/1982] Meat grinder standards.[1910.212]
- [01/19/1982] Provisions to assure that workers are adequately protected from noise exposure.[1910.95(c)]
- [01/11/1982] Variable day to day exposures cannot be averaged for compliance with action level[1910.95(c)]