Newsletter
RSS Feeds
Print This Page
Text Size
NOTICE: This is an OSHA Archive Document, and no longer represent OSHA Policy. It is presented here as historical content, for research and review purposes only. Return to current Interpretations.
Previous Years > 1975
December
- [12/18/1975] How means of egress shall be located and identified.[1910.35; 1910.36; 1910.37]
- [12/18/1975] Clarification on the required strength of press flywheel guards[1910.217(b)(1); 1910.219(b)(1)(i)]
- [11/26/1975] Required garments must be provided for and worn by flagmen.[1926.201(a)(2); 1926.201(a)(4)]
- [10/14/1975] Medical examination requirements and emergency release reporting provisions of the vinyl chloride standard.[1910.1017]
- [10/14/1975] Interpretation on accuracy requirements for crane load indicating devices.[1918.66(f)(1); 1918.66(f)(1)(ii)]
- [10/06/1975] Recreational type camps are not covered by 1910.142.[1910.142]
- [08/12/1975] Chain saw blade guard not required if it inhibits work or is a hazard.[1910.212(a)(3)(vi)(f)]
- [07/30/1975] Wire mesh gloves are not warranted in some poultry processing operations.[1910.132; 1910.138]
- [07/30/1975] Flooring requirements for steel erection changed from 25 to 30 feet on June 30, 1974.[1926.105]
- [07/21/1975] Standards for liquids with a greater than 200 degree flashpoint.[1910.106(a)(18)(ii)(a); 1910.106(a)(18)(ii)(b)]
- [07/16/1975] "Front end loaders are not covered by 1910.178".[1910.178]
- [07/16/1975] The 5-inch separation of screws on the covers of the guards for mechanical power-transmission.[1910.219(m)(2)(i)]
- [07/14/1975] Mass concentration standard for amorphous silica originally listed incorrectly.[1910.1000]
- [06/26/1975] Installation of a peripheral safety railing.[1926.750]
- [06/12/1975] A swinging gate is required only at ladderway floor openings and platforms.[1910.23(a)(2); 1910.27(d)]
- [05/30/1975] Spray finishing operations as it relates to fire protection systems.[1910.107]
- [05/29/1975] Requirements of Section 1910.124(j)[1910.124(j)]
- [05/22/1975] OSHA standard 1910.107(c)(6) on location of electrical motors in a spray operation.[1910.107(c)(6)]
- [05/09/1975] Counterweight requirements apply to cranes but not to trucks or carriers.[1918.74(a)(6)]