RSS Feeds
Print This Page
Text Size
Previous Years > 2010
May April
- [04/30/2010] Does a truck with a cab containing an intergral falling object protective structure that was manufactured to meet the ISO 3449 standard conform to 29 CFR 1926.601(b)(6)?[1926.601; 1926.601(b)(6)]
- [04/30/2010] Use of portable arc welding machines in inclement weather.[1926.351; 1926.351(a); 1926.351(b); 1926.351(c); 1926.351(d); 1926.354; 1926.406; 1926.406(c)]
- [04/30/2010] Clarification on controlled access zones for leading edge work.[1926.501; 1926.501(b); 1926.501(b)(2)(i); 1926.502; 1926.502(g); 1926.502(k); 1926.502(k)(7)]
- [04/30/2010] Interpretation of "unattended" in 29 CFR 1926.351(d)(1) with regard to electrode holders.[1926.351; 1926.351(d)(1)]
- [04/12/2010] Whether an employer can repair an extension cord under 29 CFR 1926, Subpart K.[1926.405; 1926.405(g)(2)(iii); 1926.449]
- [04/12/2010] Minimum distance required between guardrails on an industrial truck work platform.[1926.451; 1926.451(g)(1)(vii); 1926.451(g)(4)(vi)]
- [04/06/2010] Whether OSHA construction standards require a manhole cover to support at least twice a vehicle's applied axle load, regardless of the cover's size.[1926.502; 1926.502(i); 1926.502(i)(1); 1926.502(i)(2)]
- [04/04/2010] Whether extension cords may be repaired and returned to use.[1926.403; 1926.403(a); 1926.404; 1926.404(b)(1)(iii)(C)]
- [03/31/2010] Padded slings/wire rope during steel erection.[1926.251; 1926.251(c)(9); 1926.753; 1926.753(c)(2)]
- [03/31/2010] Single-point suspension scaffold safety.[1926.451; 1926.451(g)(1); 1926.451(g)(3)(iii); 1926.552; 1926.552(c)(7)]
- [03/26/2010] Use of toeboards across scaffold access points.[1926.451; 1926.451(h)(2)]
- [03/26/2010] Whether an employer is permitted to double wrap #9 gage steel wire in order to guy, tie or brace a scaffold.[1926.451; 1926.451(a)(1); 1926.451(c)]
- [03/20/2010] Whether OSHA standards require employees to be tied off while working over water on an aerial lift.[1926.453; 1926.453(b)(2)(v); 1926.550; 1926.550(g)(6)(vii)]
- [03/19/2010] Enforcement Policy for Flame-Resistant Clothing in Oil and Gas Drilling, Well Servicing, and Production-Related Operations[1910.132; 1910.132(a); 1910.132(d)]
- [03/05/2010] Restrictions on drilling within 50 feet of a hole loaded with explosives.[1926.905; 1926.905(h); 1926.905(j); 1926.905(k)]
- [03/03/2010] Whether guardrails are required on a two-point adjustable scaffold while workers who are tied off are painting the undercarriage of a water storage tank.[1926.451; 1926.451(b)(2)(ii); 1926.451(b)(3); 1926.451(g)(1)(ii)]
- [03/02/2010] Fall protection requirements for employees working on an elevator car frame.[1926.500(b); 1926.501(b)(1); 1926.502(d); 1926.502(d)(15)]
- [03/02/2010] Permissible methods of operating trucks in reverse on construction sites.[1926.601; 1926.601(b)(4); 1926.602(a)(9)(ii)]
- [03/02/2010] Fully Planked and Decked Scaffold[1926.451; 1926.451(b)(1)]
- [03/02/2010] Whether an employer can use a controlled access zone during curtain wall installation.[1926.500;1926.500(a)(2)(iii);1926.502;1926.502(g);1926.751;1926.760;1926.760(a)(1)]
- [03/02/2010] Interpretation of OSHA Fall Protection Exemption (29 CFR 1926.500(a)(1)) during inspection, investigation, and assessment activities.[1926.500; 1926.500(a)(1)]
- [03/01/2010] Testing requirements for "lifting blinds" or "lifting covers" on pressure vessels.[1926.251; 1926.251(a)(4); 1926.251(a)(5)]
- [02/16/2010] Clarification of assigned working hours when recording work-related injuires/illnesses.[1904.5; 1904.5(b)(2)(v)]
- [02/02/2010] Use of gloves by masons.[1926.95; 1926.95(a)]
- [02/01/2010] "Applicability of the PSM standard's mechanical intergrity requirements to refinery structures."[1910.119; 1910.119(d)(3); 1910.119(e); 1910.119(j); 1910.119(l)]