Directives

Directive # > Standards (STD)

STD 03-11-002 [ ] - Compliance Guidance for Residential Construction [06/16/2011]
PDF File
STD 01-12-002 [PUB 8-1.3] - Guidelines For Robotics Safety [09/21/1987]
STD 01-10-001 [PUB 8-1.5] - Guidelines for Pressure Vessel Safety [08/14/1989]
PDF File
STD 03-12-003 [PUB 8-1.8] - Guidelines on the Stability of Well Servicing Derricks [07/15/1991]
STD 01-01-001 [STD 1-1.1] - Defining the Term "Nominal Diameter" [10/30/1978]
STD 01-01-010 [STD 1-1.10] - Height of Guardrails in General Industry Applications [06/30/1981]
STD 01-01-011 [STD 1-1.11] - The Alternating Tread Type Stair [04/26/1982]
STD 01-01-012 [STD 1-1.12] - Application of 29 CFR 1910.27, Fixed Ladders, to Fixed Ladders Used in Emergency Situations [06/20/1983]
STD 01-01-013 [STD 1-1.13] - Fall Protection in General Industry 29 CFR 1910.23(c)(1), (c)(3), and 29 CFR 1910.132(a) [04/16/1984]
STD 01-01-014 [STD 1-1.14] - Fixed Ladders Used on Outdoor Advertising Structures/Billboards in the Outdoor Advertising Industry [01/26/1993]
STD 01-01-003 [STD 1-1.3] - 29 CFR 1910.27(d)(5) - Fixed Ladders, Special Requirements, Ladder Safety Devices, which adopts ANSI A14.3-1956 [10/30/1978]
STD 01-01-004 [STD 1-1.4] - 29 CFR 1910.22(b)(2), Marking of Aisles and Passageways [10/30/1978]
STD 01-01-005 [STD 1-1.5] - 29 CFR 1910.23(c)(1), Protection of Opensided Floors, Platforms and Runways; Guardrails -- Loading Rack Platforms [10/30/1978]
STD 01-01-006 [STD 1-1.6] - 29 CFR 1910.23(e)(5), (iii), Clearance of Handrails and Railings -- General Industry [10/30/1978]
STD 01-01-008 [STD 1-1.8] - 29 CFR 1910.23(c), Metal Pouring Platforms -- Protection of Open- sided Floors, Platforms and Runways [10/30/1978]
STD 01-01-009 [STD 1-1.9] - 29 CFR 1910.27, Clarification of Fixed Ladders, Relative to Manhole (Rungs) Steps [12/29/1978]
STD 01-10-002 [STD 1-10.2] - Drains on Air Receivers; 29 CFR 1910.169(a)(2)(i) and (6)(2) [10/30/1978]
STD 01-11-003 [STD 1-11.3] - 29 CFR 1910.178(m)(6) Powered Industrial Trucks; Truck Operations [10/30/1978]
STD 01-11-004 [STD 1-11.4] - 29 CFR 1910.178(g)(2); Battery Charging Stations for Fork Lifts and Other Industrial Trucks [10/30/1978]
STD 01-11-006 [STD 1-11.6A] - Disparity Between 29 CFR 1910.178(c)(2)(vii) and Table N-1, 29 CFR 1910.178(c)(2) [02/19/1979]
STD 01-11-007 [STD 1-11.7] - 29 CFR 1910.178(k)(1) and (m)(7): Mechanical Means to Secure Trucks or Trailers to a Loading Dock [08/05/1981]
STD 01-12-001 [STD 1-12.1] - Defining Acceptable Guarding of Fan Blades [10/30/1978]
STD 01-12-010 [STD 1-12.10] - Application of 29 CFR 1910.212(a)(1) to Food Waste Disposal Equipment [10/30/1978]
STD 01-12-014 [STD 1-12.14] - Clarification of 29 CFR 1910.219, the Terms "Enclosed" and "Fully Enclosed", as applying to Power Transmission Belts [10/30/1978]
STD 01-12-015 [STD 1-12.15] - 29 CFR 1910.213(a)(4), Woodworking Machinery Requirements [10/30/1978]
STD 01-12-017 [STD 1-12.17] - 29 CFR 1910.213(h)(1), Radial Saw Guards [10/30/1978]
STD 01-12-018 [STD 1-12.18] - 29 CFR 1910.213(c)(l) and (h)(1), Woodworking Machinery Guarding Requirements [10/30/1978]
STD 01-12-019 [STD 1-12.19] - Application 1910.212(a)(1) to Sewing Machines in the Light Apparel Manufacturing Industries. [10/30/1978]
STD 01-12-020 [STD 1-12.20] - 29 CFR 1910.217(b)(3)(i), Mechanical Power Presses Single Stroke Mechanism Requirements [10/30/1978]
STD 01-12-021 [STD 1-12.21] - 29 CFR 1910.217 Mechanical Power Presses, Clarifications [10/30/1978]
STD 01-12-022 [STD 1-12.22] - 29 CFR 1910.212(a)(3)(ii) Point of Operation Guarding for All Machines as Applied to the Hand-Fed Engraving Presses Used ... [01/02/1979]
STD 01-12-023 [STD 1-12.23A] - Guarding of Three-Roller Printing Ink Mills [07/12/1994]
STD 01-12-024 [STD 1-12.24] - Clarification and Interpretation of 29 CFR 1910.217, Mechanical Power Press, as Applies to the Safeguarding. [07/30/1979]
STD 01-12-025 [STD 1-12.25A] - Awareness Barriers Installed on Metal Cutting Shears [07/12/1994]
STD 01-12-026 [STD 1-12.26A] - Abrasive Operation Using Cutoff Wheels and Masonry Saws [09/26/1994]
STD 01-12-027 [STD 1-12.27] - Applicable Standards As They Pertain to Iron Workers and Mechanical Power Presses [06/30/1981]
STD 01-12-028 [STD 1-12.28] - Alternative Abatement Methods of 29 CFR 1910.212(a)(1) and (a)(2) As Applied to the Oil and Gas Drilling Industry [02/07/1983]
STD 01-12-028 [STD 1-12.28 CH-1] - Alternative Abatement Methods of 29 CFR 1910.212(a)(1) and (a)(2) As Applied to the Oil and Gas Drilling Industry [02/14/1983]
STD 01-12-004 [STD 1-12.4] - Caution Labeling of Radial Saws: 29 CFR 1910.213(h)(5) [10/30/1978]
STD 01-12-005 [STD 1-12.5] - Acceptable Guarding for Circular Meat Cutting Saws: 29 CFR Section 1910.212(a)(3)(ii) [10/30/1978]
STD 01-12-006 [STD 1-12.6] - 29 CFR 1910.218 Forging Machines [10/30/1978]
STD 01-12-007 [STD 1-12.7] - 29 CFR 1910.217 and 29 CFR 1910.212; Applicability of Platen Presses [10/30/1978]
STD 01-12-008 [STD 1-12.8] - 29 CFR 1910.215(a)(4), Abrasive Wheel Machinery Work Rests [10/30/1978]
STD 01-12-009 [STD 1-12.9] - 29 CFR 1910.212 General Requirements for all Machines [10/30/1978]
STD 01-13-001 [STD 1-13.1] - Reduction of Air Pressure below 30 psi for Cleaning Purposes [10/30/1978]
STD 01-13-002 [STD 1-13.2A] - Explosive Actuated Fastening Tools [12/09/1985]
STD 01-13-004 [STD 1-13.4] - Portable Belt Sanding Machines as Covered by 29 CFR 1910.243(a)(3) and 29 CFR 1926.304(f) [08/05/1981]
STD 01-14-001 [STD 1-14.1] - Replacement Welding Tips [10/30/1978]
STD 01-13-005 [STD 1-15.1] - Clarification of "Operations Which Involve Construction Work" as Related to Telecommunication Work [10/30/1978]
STD 01-15-002 [STD 1-15.2] - 29 CFR 1910.265(d)(1)(iii)(b), Unloading Equipment and Facilities;Hydraulically Operated Log Handling Machines [10/30/1978]
STD 01-15-004 [STD 1-15.4] - Interpretation of 29 CFR 1910.268(h)(8) Ladder Requirement Applying to Metal Manhole Ladders [10/30/1978]
STD 01-15-005 [STD 1-15.5] - Clarification of 29CFR 1926.604(a)(2)(i) and (ii) Concerning the Applicability of 1/2-Inch Plastic Sheets as a Substitute for Open Mesh Material [10/30/1978]
STD 01-16-007 [STD 1-16.7] - Electrical Safety-Related Work Practices -- Inspection Procedures and Interpretation Guidelines [07/01/1991]
STD 01-02-001 [STD 1-2.1] - 29 CFR 1910.36(b)(8), Means of Egress; Fundamental Requirements -- Relative to Workover Rigs Used to Service [10/30/1978]
STD 01-23-004 [STD 1-23.4] - OSHA Medical Surveillance Regulations -- Genetic Testing [08/22/1980]
STD 01-03-001 [STD 1-3.1] - Citation for 5(a)(1) Violation when 29 CFR 1910.68 is Inapplicable [10/30/1978]
STD 01-03-002 [STD 1-3.2] - Hunt-Pierce Servi-Lift #9-271 Aerial Lift [03/21/1979]
STD 01-03-003 [STD 1-3.3] - Building Anchors Used for Intermittent Stabilization of a Suspended Powered Platform in Window Washing Operations [11/01/1982]
STD 01-03-003 [STD 1-3.3 CH-1] - Page Changes for OSHA Instruction STD 1-3.3 [11/12/1985]
STD 01-04-001 [STD 1-4.1] - OSHA Coverage of Ionizing Radiation Sources Not Covered by Atomic Energy Act of 1954 [10/30/1978]
STD 01-04-002 [STD 1-4.2] - Classification of Polychlorinated Biphenyls (PCBs) Standards [10/30/1978]
STD 01-09-001 [STD 1-5.1] - Fire Protection System Spraying [10/30/1978]
STD 01-05-010 [STD 1-5.10] - Clarification of 29 CFR 1910.107(b)(5)(i) Average Air Velocity of Spray Booths [10/30/1978]
STD 01-05-011 [STD 1-5.11] - Uniformity in Interpretation of 29 CFR 1910.107(b)(5)(iv) and 29 CFR 1910.107(f)(1) [10/30/1978]
STD 01-05-012 [STD 1-5.12] - 29 CFR 1910.109, Explosives and Blasting Agents, Proposed Standards Modifications [10/30/1978]
STD 01-05-013 [STD 1-5.13] - 29 CFR 1910.106(h)(8)(iii); or, 29 CFR 1910.107(g)(3); or, 29 CFR 1910.108(f)(2) -- Relative to Metal Waste Cans [10/30/1978]
STD 01-05-014 [STD 1-5.14A] - U.S. Department of Transportation (DOT) Exemption Which Allow Shipment of Combustible and Flammable Liquids in Polyethylene [10/24/1980]
STD 01-05-015 [STD 1-5.15] - 29 CFR 1910.106(e)(2)(ii)(b), Clarification of the Quantity of Liquid That May be Located Outside of an Inside Storage [11/09/1979]
STD 01-05-016 [STD 1-5.16] - Venting LP-Gas to the Atmosphere [10/16/1980]
STD 01-05-018 [STD 1-5.18A] - Acceptance of U.S. Department of Transportaion Exemption DOT-E 8845 [07/12/1994]
STD 01-05-002 [STD 1-5.2] - Drainage, Dikes, and Walls for Aboveground Tanks (29 CFR 1910. 106(b)(2)(vii)) [10/30/1978]
STD 01-05-004 [STD 1-5.4] - Application of Section 1910.106, Flammable and Combustible Liquids and Particulary Diking Requirements of ... [10/30/1978]
STD 01-05-008 [STD 1-5.8] - 29 CFR 1910.104(b)(3)(iii), Oxygen; Bulk Oxygen Systems; Distance Between Systems and Exposures; Fire Resistive ... [10/30/1978]
STD 01-05-009 [STD 1-5.9] - 29 CFR 1910.106(a)(14), "Flashpoint" -- Acceptable Method of Determining Flashpoints [10/30/1978]
STD 01-06-001 [STD 1-6.1] - Application of 29 CFR 1910.132(a) to the Retail Food Industry [10/30/1978]
STD 01-06-005 [STD 1-6.5] - Exemption for Religious Reason from Wearing Hard Hats. [06/20/1994]
STD 01-07-002 [STD 1-7.2] - 29 CFR 1910.145(d)(10), Slow-moving Vehicle Emblem Requirements [10/30/1978]
STD 01-08-002 [STD 1-8.2] - 29 CFR 1910.151(c), Medical Services and First Aid; 29 CFR 1926.50 and .51, Medical Service and First Aid, and ... [03/08/1982]
STD 01-09-002 [STD 1-9.2] - 29 CFR 1910.157(f)(2),(f)(2)(i) and (f)(4) Hydrostatic Testing of Dry Chemical Cartridge Portable Fire ... [08/05/1981]
STD 01-09-003 [STD 1-9.3] - 1910.156(e)(3)(ii) Fire - Resistive Coat Requirements for Fire Brigades [12/12/1981]
STD 03-00-001 [STD 3-0.1A] - Plain Language Revision of OSHA Instruction STD 3.1, Interim Fall Protection Compliance Guidelines for Residential Construction [06/18/1999]
STD 03-01-001 [STD 3-1.1] - Clarification of Citation Policy [06/22/1987]
STD 03-10-001 [STD 3-10.1B] - General Industry and Maritime Industry Standards as Related to Construction Standard, 1926.451(a)(10) [08/14/1979]
STD 03-10-002 [STD 3-10.2] - 29 CFR 1926.451(i)(8), Multistage Suspension Scaffolds [10/30/1978]
STD 03-10-003 [STD 3-10.3] - 29 CFR 1926.451(a)(5) Scaffolding, General Requirements Guardrails [10/30/1978]
STD 03-10-004 [STD 3-10.4] - 29 CFR 1926.451 Scaffolding [10/30/1978]
STD 03-10-006 [STD 3-10.6] - 29 CFR 1926.451(w) and 29 CFR 1926.451(a)(18) As Applied to Welding Required on Float or Ship Scaffolds [08/16/1982]
STD 03-11-001 [STD 3-11.1] - Safety Monitoring Systems as it Applies to 29 CFR 1926.500(G)(1) [03/08/1982]
STD 03-12-001 [STD 3-12.1A] - 29 CFR 1926.550(a)(15)(i) Clearance Between Electrical Power Lines and Cranes [05/09/1980]
STD 03-12-002 [STD 3-12.2] - Uniformity in Interpretation of 29 CFR 1926.550(a)(9) [10/30/1978]
STD 03-12-004 [STD 3-12.4] - Interpretation of "Normal Operating Conditions" for Overhead and Gantry Cranes, and Derricks [02/08/1982]
STD 03-13-001 [STD 3-13.1] - Clarification of 29 CFR 1926.603(a)(8), Related to Tying Off Loft- Workers, Top-Men and/or Pile Monks [10/30/1978]
STD 03-13-002 [STD 3-13.2] - 29 CFR 1926.605(a)(1) as Applied to Marine Construction [07/15/1982]
STD 03-15-003 [STD 3-15.3] - 29 CFR 1926.705, Requirements for Lift-Slab Construction Operations -- Inspection Procedures and Guidelines [03/01/1991]
STD 03-19-001 [STD 3-19.1] - 29 CFR 1926.902(d) Proposed Modifications to Explosives and Blasting Agents and Surface Transportation of Explosives [10/30/1978]
STD 03-04-001 [STD 3-4.1A] - De Minimis for Absence of a Flame Arrestor Screen in a Safety Can [09/16/1980]
STD 03-06-001 [STD 3-6.1] - 1926.250(b)(1), Material Storage -- As Related to Interim Storage of Temporary Flooring Used in Steel Erection [10/30/1978]
STD 03-06-002 [STD 3-6.2] - 29 CFR 1926.250.(b)(1), Material Storage -- As Related to Interim Storage of Concrete Forms and Shoring [10/30/1978]
STD 03-08-001 [STD 3-8.1] - Welding, Cutting or Heating of Metals Coated with Lead-Bearing Paint [10/30/1978]
STD 03-08-002 [STD 3-8.2] - 29 CFR 1926.350(a)(9) Securing of Compressed Gas Cylinders [03/11/1981]
STD 04-00-001 [STD 4.1] - Interpretations of: (a)-29 CFR 1928.51(a), Definitions "Agricultural Tractor." (b)-29 CFR 1928.51(b)(1), Rollover [10/30/1978]
STD 04-00-002 [STD 4.2] - Low Profile Tractor [10/30/1978]
STD 06-00-001 [STD 6.1] - Variance Policy and Procedures [10/30/1978]
STD 08-00-001 [STD 8.1] - Interpretation of Standards [09/15/1980]


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business