Directives

Previous Years > 1978

December

[12/29/1978] STD 01-01-009 [STD 1-1.9] - 29 CFR 1910.27, Clarification of Fixed Ladders, Relative to Manhole (Rungs) Steps

October

[10/30/1978] STD 03-06-001 [STD 3-6.1] - 1926.250(b)(1), Material Storage -- As Related to Interim Storage of Temporary Flooring Used in Steel Erection
[10/30/1978] STD 01-05-008 [STD 1-5.8] - 29 CFR 1910.104(b)(3)(iii), Oxygen; Bulk Oxygen Systems; Distance Between Systems and Exposures; Fire Resistive ...
[10/30/1978] STD 01-05-009 [STD 1-5.9] - 29 CFR 1910.106(a)(14), "Flashpoint" -- Acceptable Method of Determining Flashpoints
[10/30/1978] STD 01-05-013 [STD 1-5.13] - 29 CFR 1910.106(h)(8)(iii); or, 29 CFR 1910.107(g)(3); or, 29 CFR 1910.108(f)(2) -- Relative to Metal Waste Cans
[10/30/1978] STD 01-05-012 [STD 1-5.12] - 29 CFR 1910.109, Explosives and Blasting Agents, Proposed Standards Modifications
[10/30/1978] STD 01-07-002 [STD 1-7.2] - 29 CFR 1910.145(d)(10), Slow-moving Vehicle Emblem Requirements
[10/30/1978] STD 01-11-004 [STD 1-11.4] - 29 CFR 1910.178(g)(2); Battery Charging Stations for Fork Lifts and Other Industrial Trucks
[10/30/1978] STD 01-11-003 [STD 1-11.3] - 29 CFR 1910.178(m)(6) Powered Industrial Trucks; Truck Operations
[10/30/1978] STD 01-12-009 [STD 1-12.9] - 29 CFR 1910.212 General Requirements for all Machines
[10/30/1978] STD 01-12-015 [STD 1-12.15] - 29 CFR 1910.213(a)(4), Woodworking Machinery Requirements
[10/30/1978] STD 01-12-018 [STD 1-12.18] - 29 CFR 1910.213(c)(l) and (h)(1), Woodworking Machinery Guarding Requirements
[10/30/1978] STD 01-12-017 [STD 1-12.17] - 29 CFR 1910.213(h)(1), Radial Saw Guards
[10/30/1978] STD 01-12-008 [STD 1-12.8] - 29 CFR 1910.215(a)(4), Abrasive Wheel Machinery Work Rests
[10/30/1978] STD 01-12-021 [STD 1-12.21] - 29 CFR 1910.217 Mechanical Power Presses, Clarifications
[10/30/1978] STD 01-12-007 [STD 1-12.7] - 29 CFR 1910.217 and 29 CFR 1910.212; Applicability of Platen Presses
[10/30/1978] STD 01-12-020 [STD 1-12.20] - 29 CFR 1910.217(b)(3)(i), Mechanical Power Presses Single Stroke Mechanism Requirements
[10/30/1978] STD 01-12-006 [STD 1-12.6] - 29 CFR 1910.218 Forging Machines
[10/30/1978] STD 01-01-004 [STD 1-1.4] - 29 CFR 1910.22(b)(2), Marking of Aisles and Passageways
[10/30/1978] STD 01-01-005 [STD 1-1.5] - 29 CFR 1910.23(c)(1), Protection of Opensided Floors, Platforms and Runways; Guardrails -- Loading Rack Platforms
[10/30/1978] STD 01-01-008 [STD 1-1.8] - 29 CFR 1910.23(c), Metal Pouring Platforms -- Protection of Open- sided Floors, Platforms and Runways
[10/30/1978] STD 01-01-006 [STD 1-1.6] - 29 CFR 1910.23(e)(5), (iii), Clearance of Handrails and Railings -- General Industry
[10/30/1978] STD 01-15-002 [STD 1-15.2] - 29 CFR 1910.265(d)(1)(iii)(b), Unloading Equipment and Facilities;Hydraulically Operated Log Handling Machines
[10/30/1978] STD 01-01-003 [STD 1-1.3] - 29 CFR 1910.27(d)(5) - Fixed Ladders, Special Requirements, Ladder Safety Devices, which adopts ANSI A14.3-1956
[10/30/1978] STD 01-02-001 [STD 1-2.1] - 29 CFR 1910.36(b)(8), Means of Egress; Fundamental Requirements -- Relative to Workover Rigs Used to Service
[10/30/1978] STD 03-06-002 [STD 3-6.2] - 29 CFR 1926.250.(b)(1), Material Storage -- As Related to Interim Storage of Concrete Forms and Shoring
[10/30/1978] STD 03-10-004 [STD 3-10.4] - 29 CFR 1926.451 Scaffolding
[10/30/1978] STD 03-10-003 [STD 3-10.3] - 29 CFR 1926.451(a)(5) Scaffolding, General Requirements Guardrails
[10/30/1978] STD 03-10-002 [STD 3-10.2] - 29 CFR 1926.451(i)(8), Multistage Suspension Scaffolds
[10/30/1978] STD 03-19-001 [STD 3-19.1] - 29 CFR 1926.902(d) Proposed Modifications to Explosives and Blasting Agents and Surface Transportation of Explosives
[10/30/1978] STD 01-12-005 [STD 1-12.5] - Acceptable Guarding for Circular Meat Cutting Saws: 29 CFR Section 1910.212(a)(3)(ii)
[10/30/1978] PER 02-00-001 [PER 3.1] - Acceptance of Gratuities
[10/30/1978] CPL 02-00-002 [CPL 2.2] - American Red Cross Agreement
[10/30/1978] STD 01-12-019 [STD 1-12.19] - Application 1910.212(a)(1) to Sewing Machines in the Light Apparel Manufacturing Industries.
[10/30/1978] STD 01-06-001 [STD 1-6.1] - Application of 29 CFR 1910.132(a) to the Retail Food Industry
[10/30/1978] STD 01-12-010 [STD 1-12.10] - Application of 29 CFR 1910.212(a)(1) to Food Waste Disposal Equipment
[10/30/1978] STD 01-05-004 [STD 1-5.4] - Application of Section 1910.106, Flammable and Combustible Liquids and Particulary Diking Requirements of ...
[10/30/1978] PER 02-00-002 [PER 3.2] - Bribe Offers to OSHA Employees
[10/30/1978] STD 01-12-004 [STD 1-12.4] - Caution Labeling of Radial Saws: 29 CFR 1910.213(h)(5)
[10/30/1978] STD 01-03-001 [STD 1-3.1] - Citation for 5(a)(1) Violation when 29 CFR 1910.68 is Inapplicable
[10/30/1978] STD 01-13-005 [STD 1-15.1] - Clarification of "Operations Which Involve Construction Work" as Related to Telecommunication Work
[10/30/1978] STD 01-05-010 [STD 1-5.10] - Clarification of 29 CFR 1910.107(b)(5)(i) Average Air Velocity of Spray Booths
[10/30/1978] STD 01-12-014 [STD 1-12.14] - Clarification of 29 CFR 1910.219, the Terms "Enclosed" and "Fully Enclosed", as applying to Power Transmission Belts
[10/30/1978] STD 03-13-001 [STD 3-13.1] - Clarification of 29 CFR 1926.603(a)(8), Related to Tying Off Loft- Workers, Top-Men and/or Pile Monks
[10/30/1978] STD 01-15-005 [STD 1-15.5] - Clarification of 29CFR 1926.604(a)(2)(i) and (ii) Concerning the Applicability of 1/2-Inch Plastic Sheets as a Substitute for Open Mesh Material
[10/30/1978] STD 01-04-002 [STD 1-4.2] - Classification of Polychlorinated Biphenyls (PCBs) Standards
[10/30/1978] CSP 01-05-001 [STP 2-1.9] - Coverage of State and Local Employees in State Plans
[10/30/1978] STD 01-12-001 [STD 1-12.1] - Defining Acceptable Guarding of Fan Blades
[10/30/1978] STD 01-01-001 [STD 1-1.1] - Defining the Term "Nominal Diameter"
[10/30/1978] CSP 01-01-002 [STP 2.2] - Definition of "Issue"
[10/30/1978] STD 01-05-002 [STD 1-5.2] - Drainage, Dikes, and Walls for Aboveground Tanks (29 CFR 1910. 106(b)(2)(vii))
[10/30/1978] STD 01-10-002 [STD 1-10.2] - Drains on Air Receivers; 29 CFR 1910.169(a)(2)(i) and (6)(2)
[10/30/1978] PER 00-00-001 [ADM 2.1] - Employee Recognition Program
[10/30/1978] STD 01-09-001 [STD 1-5.1] - Fire Protection System Spraying
[10/30/1978] CSP 01-01-004 [STP 2-1.3] - General Guidance for Regional Office Review of State 18(b) Plans
[10/30/1978] CPL 02-02-006 [CPL 2-2.6] - Inorganic Mercury and its Compounds
[10/30/1978] CPL 02-00-009 [CPL 2.9] - Inspections of Granted Variances
[10/30/1978] CPL 00-00-001 [CPL 1.2] - Interagency "Early Warning System"
[10/30/1978] STD 01-15-004 [STD 1-15.4] - Interpretation of 29 CFR 1910.268(h)(8) Ladder Requirement Applying to Metal Manhole Ladders
[10/30/1978] STD 04-00-001 [STD 4.1] - Interpretations of: (a)-29 CFR 1928.51(a), Definitions "Agricultural Tractor." (b)-29 CFR 1928.51(b)(1), Rollover
[10/30/1978] STD 04-00-002 [STD 4.2] - Low Profile Tractor
[10/30/1978] CSP 01-03-001 [STP 2.11] - Maritime Jurisdiction in State Plan States
[10/30/1978] CSP 01-01-010 [TED 3.1] - Modification of the Requirements for Consultation Programs in State 18(b) Plans
[10/30/1978] STD 01-04-001 [STD 1-4.1] - OSHA Coverage of Ionizing Radiation Sources Not Covered by Atomic Energy Act of 1954
[10/30/1978] EEO 01-00-001 [PER 5-5.2] - OSHA's Policy for Equal Employment Opportunity
[10/30/1978] PER 02-00-003 [PER 3.3] - Outside Employment -- Teaching, Lecturing and Writing
[10/30/1978] CSP 01-01-006 [STP 2-1.6] - Pre-Approved Public Disclosure of State Plans
[10/30/1978] PRO 02-00-001 [PRO 4.3] - Procurement of Safety Glasses and Safety Shoes
[10/30/1978] CSP 01-01-003 [STP 2.3] - Providing for Consultation in a State 18(b) Plan
[10/30/1978] CSP 01-05-002 [STP 2-1.13] - Public Employee Recordkeeping Under 18(b) Plans
[10/30/1978] STD 01-13-001 [STD 1-13.1] - Reduction of Air Pressure below 30 psi for Cleaning Purposes
[10/30/1978] CSP 01-03-002 [STP 2.13] - Reference Book on Jurisdiction Issues
[10/30/1978] ADM 03-01-001 [ADM 12-9.2] - Release to the State of Personnel Information on Federal Monitors
[10/30/1978] STD 01-14-001 [STD 1-14.1] - Replacement Welding Tips
[10/30/1978] CSP 01-01-005 [STP 2-1.4] - Review and Analysis of State 18(b) Plans at the National Office
[10/30/1978] CSP 01-01-009 [STP 2-1.19] - Sample Federal Register Notices for Approval of State Standards
[10/30/1978] CSP 01-01-001 [STP 2.1] - Standard Comparison Format for 18(b) Plans
[10/30/1978] CSP 01-01-007 [STP 2-1.12] - State Statistical and Recordkeeping Program Under 18(b) Plans
[10/30/1978] PER 04-00-001 [PER 8.1] - The OSHA Safety and Health Program
[10/30/1978] CSP 01-01-008 [STP 2-1.17] - Transfer of Responsibility for Review and Approval or Rejection of State Standards
[10/30/1978] STD 01-05-011 [STD 1-5.11] - Uniformity in Interpretation of 29 CFR 1910.107(b)(5)(iv) and 29 CFR 1910.107(f)(1)
[10/30/1978] STD 03-12-002 [STD 3-12.2] - Uniformity in Interpretation of 29 CFR 1926.550(a)(9)
[10/30/1978] STD 06-00-001 [STD 6.1] - Variance Policy and Procedures
[10/30/1978] STD 03-08-001 [STD 3-8.1] - Welding, Cutting or Heating of Metals Coated with Lead-Bearing Paint
[10/10/1978] CPL 02-02-022 [CPL 2-2.22] - 29 CFR 1910.1018 Inspection and Compliance Procedures for the Permanent Occupation Exposure Standard for Inorganic Arsenic Compounds.


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business