| 91. |
1982 - 03/26/1982 - Question of whether the noise standard is adjusted for workshifts greater than 8 hours. |
13k |
March 26, 1982 Mr. Jonathan A. Jacoby Supervisor, Industrial Hygiene Ethyl Corporation Toxicology and Industrial Hygiene Department Ethyl Tower, 451 Florida Baton Rouge, Louisiana 70801 Dear Mr. Jaco...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=19009
|
| 92. |
1981 - 09/15/1981 - Compliance determination based on worst day noise exposure. |
13k |
September 15, 1981 K. E. Anderson, Director Corporate Safety and Industrial Hygiene A. O. Smith Corporation Post Office Box 584 Milwaukee, Wisconsin 53201 Dear Mr. Anderson: This is in response to yo...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=18968
|
| 93. |
2001 - 02/01/2001 - Acceptability of Task-Based Noise Exposure Assessment Modeling (T-BEAM). |
14k |
February 1, 2001 Mr. Lee D. Hager Executive Vice President James, Anderson & Associates, Inc. 2123 University Park Drive, #130 Okemos, Michigan 48864 Dear Mr Hager: Thank you for your January 28,...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=23784
|
| 94. |
1999 - 07/28/1999 - OSHA's rationale for the noise exposure PEL. |
15k |
OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additiona...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22771
|
| 95. |
1989 - 12/14/1989 - Noise inspection conducted at Robben's Roost, Louisville, Kentucky. |
13k |
December 14, 1989 Mr. John R. Majka 5917 Six Mile Lane Louisville, Kentucky 40218 Dear Mr. Majka: This is an interim response to your letter of November 8, concerning a noise inspection conducted at ...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=19890
|
| 96. |
1987 - 11/20/1987 - Reduction of noise exposure for metal spray operations. |
12k |
November 20, 1987 Mr. Brent Miller Metco Technical Field Engineer Weldwell New Zealand 2581 Dear Mr. Miller: This is in response to your inquiry of October 30, to the U.S. Occupational Safety and Hea...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=19616
|
| 97. |
1987 - 06/09/1987 - Requirement for instituting engineering and administrative controls for noise. |
12k |
June 9, 1987 Robert A. Dobie, M.D. Chairman Subcommittee, Medical Aspects of Noise University of Washington Seattle, Washington 98195 Dear Dr. Dobie: This is in response to your letter of February 27...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=19555
|
| 98. |
1986 - 12/10/1986 - Calibration of noise dosimeters |
12k |
December 10, 1986 P. W. Hess, Ph.D. Director, Environmental Affairs Hershey Foods Corporation Technical Center Post Office Box 805 Hershey, Pennsylvania 17033-0805 Dear Dr. Hess: This is in response ...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=19512
|
| 99. |
1986 - 10/10/1986 - Field calibration of noise dosimeters. |
12k |
October 10, 1986 P.W. Hess, Ph.D. Director, Environmental Affairs Hershey Foods Corporation Technical Center Post Office Box 805 Hershey, Pennsylvania 17033 Dear Dr. Hess: This is in response to your...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=19493
|
| 100. |
1986 - 07/10/1986 - Response to letter suggesting that the noise standard of 90 dB(A) is set at too high a level, and should be 85 dB(A) or less. |
12k |
July 10, 1986 The Honorable Thomas S. Foley House of Representatives Washington, D.C. 20515 Dear Congressman Foley: Thank you for your letter of June 10, on behalf of your constituent, Mr. Jeff Jacqu...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=19452
|