| 11. |
1998 - 08/19/1998 - Workers must be protected from hazards of heated (hot) surfaces. |
18k |
August 19, 1998 Mr. Mike Lodge Procedair Industries 625 President Kennedy Montreal, Quebec, Canada H3A 1K2 Dear Mr. Lodge: Thank you for your letter of June 1 written as a follow-up to your conversat...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22617
|
| 12. |
1996 - 10/02/1996 - Food Inspectors lockout/tagout procedures. |
13k |
October 2, 1996 Mr. William J. Hudnall Deputy Administrator for Administrative Management U.S. Department of Agriculture Food Safety Inspection Service Administrative Management Room 347E J.L. Whitte...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22272
|
| 13. |
1991 - 06/04/1991 - Interpretation of 1910.147, related to floating fish processors. |
12k |
June 4, 1991 MEMORANDUM FOR: JAMES W. LAKE REGIONAL ADMINISTRATOR FROM: PATRICIA K. CLARK, DIRECTOR DIRECTORATE OF COMPLIANCE PROGRAMS SUBJECT: Interpretation of 29 CFR 1910.147 Related to Floating F...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=20285
|
| 14. |
1990 - 12/28/1990 - Applicability of 1910.120 to the Uranium Mill Tailings Remedial Action Project |
12k |
December 28, 1990 Mr. J. G. Oldham Project Director MK - Ferguson Company Remedial Actions Contractor - UMTRA Project Post Office Box 9136 Albuquerque, New Mexico 87119 Dear Mr. Oldham: This is an up...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=20152
|
| 15. |
2007 - 05/04/2007 - Lockout/Tagout and the provisions for testing or positioning of machines while they are energized. |
16k |
This letter constitutes OSHA's interpretation only of the requirements discussed and may not be applicable to any situation not delineated within the original correspondence. May 4, 2007 Mr. Dan ...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=25827
|
| 16. |
2006 - 07/19/2006 - Group LOTO and supervisor's accessibility to individual employee lock when employee is not available to remove lock. |
15k |
July 19, 2006 [Name and address withheld] Dear [Name withheld]: Thank you for your April 7, 2006, letter to the Occupational Safety and Health Administration's (OSHA) Directorate of Enforcement P...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=25436
|
| 17. |
2002 - 07/08/2002 - Use of verification tags for lockout. |
17k |
July 8, 2002 Name Withheld To whom it may concern: Thank you for your letter to the Occupational Safety and Health Administration’s (OSHA’s) Directorate of Compliance Programs regarding t...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=24188
|
| 18. |
2000 - 03/22/2000 - Lockout/tagout: preferred means of energy isolation; non cord-and-plug powered equipment. |
16k |
OSHA requirements are set by statute, standards and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additiona...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=23415
|
| 19. |
1997 - 02/19/1997 - An interpretation of the electric power generation standard. |
13k |
February 19, 1997 Mr. Ladd G. Poor Power Supply Safety Administrator PACIFICORP 1407 West North Temple Salt Lake City, Utah 84140 Dear Mr. Poor: This is response to your June 4, 1996, letter requesti...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22352
|
| 20. |
2006 - 07/28/2006 - Clarification about 29 CFR 1910.333 and 29 CFR 1910.147 as they relate to work inside an electrical panel and on related equipment. |
20k |
This letter constitutes OSHA's interpretation only of the requirements discussed and may not be applicable to any situation not delineated within the original correspondence. July 28, 2006 Mr. Ri...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=25438
|