| 1. |
1999 - 11/02/1999 - Powered industrial truck requirements regarding "split-forking" and "bulldozing." |
15k |
November 2, 1999 Howard Edwards Industrial Hygiene Supervisor Parts & Service Support Center Caterpillar, Inc. 500 N. Morton Avenue Morton, Il 61550-0474 Thank you for your August 27, 1999 letter to ...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22809
|
| 2. |
1997 - 04/11/1997 - Powered industrial truck modifications and approval. |
15k |
April 11, 1997 Mr. Kenneth J. Yotz Senior Vice President Environmental, Management and Training Systems, Inc. 919 St Andrews Circle Geneva, Illinois 60134-2995 Dear Mr.Yotz: This is in further respon...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22384
|
| 3. |
2004 - 08/13/2004 - Requirements for the sound level of a warning device (horn) located on a forklift. |
12k |
August 13, 2004 Mr. William Overby 2932 Hazel Ave. Dayton, OH 45420 Dear Mr. Overby: Thank you for your May 7, 2004 letter to the Department of Labor, Occupational Safety and Health Administration (O...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=24941
|
| 4. |
2004 - 06/17/2004 - Clarification of the Powered Industrial Truck (1910.178) standard's use of the terms "in need of repair," "defective," and "unsafe." |
14k |
June 17, 2004 Mr. William Overby 2932 Hazel Ave. Dayton, OH 45420 Dear Mr. Overby: Thank you for your letter to the Occupational Safety and Health Administration (OSHA). The Directorate of Enforcemen...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=24905
|
| 5. |
1999 - 09/23/1999 - 1910.178 does not apply to agricultural operations. |
12k |
September 23, 1999 Memorandum For:Regional AdministratorsState Designees Through:R. Davis Layne,Deputy Assistant Secretary From:Richard Fairfax, DirectorDirectorate of Compliance Programs Subject:Pow...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22785
|
| 6. |
2013 - 02/26/2013 - Clarification on whether the installation of a burial vault is a construction activity. |
14k |
February 26, 2013 Mr. Thomas A. Monahan Executive Director The National Concrete Burial Vault Association, Inc. PO Box 917525 Longwood, FL 32791 Re: Cranes and Derricks in Construction standard; Is i...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=28589
|
| 7. |
2005 - 05/13/2005 - Coverage of volunteers; forklift operator training for multiple facilities determined by similarity of potential workplace hazards. |
17k |
May 13, 2005 Mr. Steve Stillwell Assistant to the Director Carolina Conference Adventist Disaster Response 5201 Cashion Road Huntersville, NC 28078 Dear Mr. Stillwell: Thank you for your August 5, 20...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=25097
|
| 8. |
2003 - 12/16/2003 - Additional fall protection requirements for concrete trucks when work platforms are equipped with guardrails and toeboards. |
14k |
December 16, 2003 Thomas Harman, CSP National Ready Mixed Concrete Association 900 Spring Street Silver Spring, MD 20910 Dear Mr. Harman: Thank you for your February 6 letter to the Occupational Safe...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=25350
|
| 9. |
1999 - 10/22/1999 - Forklifts: free rigging requires manufacturer approval. |
13k |
October 22, 1999 Mr. Dennis C. Humphreys Department of Energy Richland Operations Office P.O. Box 550, R-3-78 Richland, Washington 99352 Dear Mr. Humphreys: Thank you for your June 1, 1999 letter to ...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22800
|
| 10. |
1997 - 05/28/1997 - Reporting over-the-road fatalities; Refusing entry and employee interviews to an OSHA inspector; and OSHA's policy associated with seat belts on forklift trucks. |
16k |
May 28, 1997 Mr. Jai Kundu, Vice President American Trucking Association 2200 Mill Road Alexandria, VA 22314-4677 Dear Mr. Kundu: This is in response to your letter of January 2, in which you asked f...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22419
|