| 1. |
1986 - 05/23/1986 - Application of the HCS to non-manufacturing scrap dealers who collect waste metal for resale. |
27k |
May 23, 1986 Mr. Edward L. Merrigan Washington Council National Association of Recycling Industries, Inc. 6000 Connecticut Avenue, N. W. Washington, D. C. 20815 Dear Mr. Merrigan: This is in response...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=19435
|
| 2. |
1997 - 06/30/1997 - Sodium Azide as Used in the Manufacturing Process of Automobile Air Bags. |
21k |
June 30, 1997 MEMORANDUM FOR: CHRIS LEE, Acting Regional Administrator Region IX FROM: JOHN B. MILES, JR., Director Directorate of Compliance Programs SUBJECT: Sodium Azide as Used in the Manufacturi...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22442
|
| 3. |
1998 - 02/04/1998 - Applicability of PSM standard to explosive and pyrotechnic manufacturing. |
14k |
February 4, 1998 Mr. Frank A. White, Vice President Organization Resources Counselors, Inc. 1910 Sunderland Place, N.W. Washington, DC 20036 Dear Mr. White: The following is a response to your letter...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22524
|
| 4. |
1999 - 07/09/1999 - Applicability of the PSM standard to a flammable liquid manufacturing process. |
14k |
This letter constitutes OSHA's interpretation only of the requirements discussed and may not be applicable to any situation not delineated within the original correspondence. July 9, 1999 Mr. Joe...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22760
|
| 5. |
1999 - 11/23/1999 - PSM standard applicability to a table glassware manufacturing process. |
13k |
November 23, 1999 Mr. Steven Lee Environmental Engineer Libbey Glass, Inc. 4302 Jewella Avenue Shreveport, LA 71109 Dear Mr. Lee: Thank you for your November 4, 1998 letter to the Occupational Safety...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22826
|
| 6. |
1993 - 12/30/1993 - Applicability of the Process Safety Management manufacturing processes involving workplace explosives. |
13k |
December 30, 1993 Mr. L. Dave McLean Strategic Operations Thiokol Corporation P.O. Box 689-M/S DOO Brigham City, Utah 84302 Dear Mr. McLean: The purpose of this letter is to further clarify the Occup...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=21346
|
| 7. |
2008 - 09/09/2008 - Employee concern about overexposure to formaldehyde at FEMA trailer manufacturing sites. |
15k |
September 9, 2008 The Honorable Mary Landrieu United States Senate Washington, D.C. 20510 Dear Senator Landrieu: This is in response to your letter raising concerns regarding the Occupational Safety ...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=27211
|
| 8. |
2003 - 02/25/2003 - Retesting of reassembled lifting accessories if original manufacturing controls are ensured; retesting requirement if repair/replacement of parts due to breakage, damage, or evidence of diminished capacity. |
17k |
February 25, 2003 Mr. Dan Wagester Siemens Westinghouse Power Corp. 4400 Alafaya Trail Orlando, Florida 32826-5032 Re: Whether 29 CFR 1926.251(a)(4) requires re-testing after disassembly/reassembly o...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=24476
|
| 9. |
1997 - 12/31/1997 - Stay-of-enforcement of lead standard for brass and bronze ingot manufacturing. |
11k |
December 31, 1997 MEMORANDUM FOR: ALL REGIONAL ADMINISTRATORS FROM: JOHN MILES, JR., DIRECTOR DIRECTORATE OF COMPLIANCE PROGRAMS SUBJECT: Stay-of-enforcement on Paragraph(e)(1) of General Industry Le...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22513
|
| 10. |
1995 - 03/09/1995 - Employees in a cotton yarn manufacturing plant who voluntarily wear cloth over their mouths and noses to prevent lint from sticking to their skin. |
13k |
March 9, 1995 Mr. William K. Principe Constangy, Brooks & Smith Attorneys at Law Suite 2400 230 Peachtree Street, N.W. Atlanta, Georgia 30303-1557 Dear Mr. Principe: This is in response to your lette...
http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=21716
|