Standard Interpretations referencing 1926.760


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business

#	Title
1	2011 - 04/22/2011 - Distance at which fall protection is required for steel erection activities.
2	2010 - 08/10/2010 - Acceptable equivalent to control lines for a Controlled Decking Zone (CDZ) in steel erection activities. 29 CFR 1926.760(c)(3).
3	2010 - 03/02/2010 - Whether an employer can use a controlled access zone during curtain wall installation.
4	2005 - 04/05/2005 - Evaluation if moving point-to-point on concrete wall to make initial connections of structural steel is "connecting" work; landing loads on systems-engineered metal building.
5	2004 - 08/03/2004 - Use of fall protection by deaf employees performing steel erection activities.
6	2003 - 12/22/2003 - Designation of an entire floor as a controlled decking zone for steel decking work.
7	2003 - 09/26/2003 - Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.
8	2003 - 07/07/2003 - Requirements for fall protection when ladder jack scaffolds are used for residential and commercial construction.
9	2003 - 04/09/2003 - OSHA standards set minimum safety and health requirements;they do not prohibit employers from adopting more stringent requirements.
10	2001 - 12/21/2001 - Decision to release the new compliance directive for the steel erection standard in draft form.
11	2001 - 09/27/2001 - History and background of the Steel Erection Final Rule.