# Title
 1  2012 - 04/20/2012 - Clarification on the use of safety monitors as a method of fall protection on a low-slope roof.
 2  2010 - 09/30/2010 - Whether OSHA will rely on ANSI Z359.1-2007, regarding snaphook compressive strength requirements, in enforcing the general duty clause with respect to personal fall arrest systems in construction, as announced in Letter #20070920-8088.
 3  2010 - 04/30/2010 - Clarification on controlled access zones for leading edge work.
 4  2010 - 04/06/2010 - Whether OSHA construction standards require a manhole cover to support at least twice a vehicle's applied axle load, regardless of the cover's size.
 5  2010 - 03/02/2010 - Whether an employer can use a controlled access zone during curtain wall installation.
 6  2007 - 11/26/2007 - Whether the "Clear Gear Lanyard Elevator" conforms to OSHA construction standards.
 7  2006 - 04/17/2006 - Guardrail height requirements for construction activities in General Industry Facilities.
 8  2004 - 11/30/2004 - Residential fall protection: safety monitors; walking top plate of braced walls in installation; warning line; plating exterior walls; height limitation; non-roofer PPE; slide guards.
 9  2004 - 02/19/2004 - Fall protection components from different manufacturers may be used together provided connecting parts are sized compatibly.
 10  2003 - 10/31/2003 - Compliance requirements for the use of U-bolt-type cable clamps in horizontal lifelines.
 11  2003 - 09/26/2003 - Compliance of using warning lines and/or control access zones for fall protection on roofs with a slope greater than 4:12.
 12  2003 - 07/09/2003 - Clarification of 1926.502(d)(6) term "designed for" in snaphook connections.
 13  2003 - 07/07/2003 - Requirements for fall protection when ladder jack scaffolds are used for residential and commercial construction.
 14  2002 - 11/15/2002 - Fall protection requirements for employees, other than roofers, working on low-slope roofs.
 15  2002 - 11/08/2002 - Applicability of the steel erection standard to repair and installation of metal roofing and roofing accessories.
 16  2002 - 07/17/2002 - Steel erection standard requirements concerning installation of perimeter safety cable.
 17  2001 - 09/18/2001 - Fall protection requirements of various construction (1926) standards.
 18  2001 - 01/11/2001 - PR 600 Mobile Fall Protection System.
 19  2000 - 08/28/2000 - Clips used for wire rope guardrails; required fall protection in hoist area.
 20  2000 - 02/23/2000 - Fall protection, training, inspection and design requirements of aerial lifts and scissor lifts/scaffolds.
 21  1998 - 03/12/1998 - Safety net and supporting stanchion requirements.
 22  1997 - 04/16/1997 - Fall protection in a situation regarding floor/roofing openings.
 23  1997 - 03/21/1997 - Fall protection in lieu of personal fall arrest systems and the need for a rescue skiff.
 24  1996 - 12/04/1996 - Infeasibility of 6 foot free fall limit.
 25  1996 - 07/23/1996 - Enforcement of the fall protection standard and fall protection options.
 26  1996 - 03/13/1996 - OSHA's requirements for locking type snaphooks on pole strap systems.
 27  1996 - 02/14/1996 - OSHA's policy regarding the use of scaffolds as fall arrest system anchors.
 28  1996 - 02/01/1996 - Spacing of connections between safety net panels.
 29  1996 - 01/30/1996 - Installation of fall protection equipment criteria in 1926.502.
 30  1996 - 01/26/1996 - Manucroche Quick Connector for fall arrest systems.
 31  1995 - 11/02/1995 - Fall restraint system used in lieu of fall arrest systems.
 32  1995 - 11/02/1995 - If a fall restraint system could be considered a form of fall protection to be used instead of guardrails, safety lines, or fall arrest systems.
 33  1995 - 09/25/1995 - OSHA's new fall protection standards for construction will prohibit use of safety belts with side dee rings as part of a personal fall arrest system.
 34  1995 - 09/25/1995 - Review of a new product, "The Safety Boot".
 35  1995 - 09/01/1995 - Fall Protection in the power distribution industry.
 36  1995 - 08/28/1995 - The frequency of the load measuring system when testing fall arrest equipment should be set at 500 Hz.
 37  1995 - 03/15/1995 - Compliance from OSHA for an inflatable fall arrest device.