# Title
 1  2010 - 03/02/2010 - Fall protection requirements for employees working on an elevator car frame.
 2  2009 - 03/16/2009 - Fall protection requirements for employees on construction equipment.
 3  2005 - 04/11/2005 - Scaffolding/shoring.
 4  2005 - 01/03/2005 - Use of a warning line instead of conventional fall protection; Part 1926 Subpart M.
 5  2004 - 09/30/2004 - Clarification if a depression constitutes a hole or unprotected side/edge and associated fall protection requirements.
 6  2004 - 03/10/2004 - Fall protection is not required where there is no feasible means of providing it while working on vehicles or trailers.
 7  2003 - 12/17/2003 - Clarification of several residential construction and fall protection issues.
 8  2003 - 12/15/2003 - Fall protection requirements for construction workers doing work while on a roof.
 9  2003 - 05/21/2003 - Fall protection requirements for an employee working from a ladder on a walking/working surface other than the ground.
 10  2001 - 09/13/2001 - Fall protection requirements for both residential and commercial HVAC systems; clarification of confined spaces.
 11  2001 - 05/03/2001 - Fall protection requirements for workers engaged in "roof blocking."
 12  2001 - 05/03/2001 - Use of aerial lifts to transport workers to elevated workstations; scissor lifts are not covered by the aerial lift provisions.
 13  2000 - 08/28/2000 - Employees engaged in formwork over 6 feet high must have fall protection.
 14  2000 - 08/14/2000 - Clarification of the terms "hole" versus "unprotected sides or edges."
 15  1998 - 06/08/1998 - Fall protection for exposure to unfilled swimming pools.