Standard Interpretations referencing 1926.500(b)


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business

#	Title
1	2010 - 03/02/2010 - Fall protection requirements for employees working on an elevator car frame.
2	2006 - 09/05/2006 - When protective measures must be installed after a hole is created on a construction worksite.
3	2005 - 05/11/2005 - Under Subpart M, whether a lanyard may be connected to another lanyard by a snaphook, provided the potential fall distance is six feet or less.
4	2004 - 09/30/2004 - Clarification if a depression constitutes a hole or unprotected side/edge and associated fall protection requirements.
5	2004 - 05/28/2004 - The construction fall protection standard specifies fall arrest system requirements, but no footwear requirements.
6	2003 - 12/22/2003 - Fall protection requirements for stairwells and mechanical chase openings surrounded by interior stud walls in residential construction.
7	2003 - 12/16/2003 - Additional fall protection requirements for concrete trucks when work platforms are equipped with guardrails and toeboards.
8	2003 - 05/21/2003 - Fall protection requirements for an employee working from a ladder on a walking/working surface other than the ground.
9	2001 - 05/11/2001 - Standards applicable to aerial lifts; acceptable uses of body belts as restraint systems and positioning devices.
10	1999 - 09/23/1999 - Neither a waist nor chest strap is a required part of body harness.
11	1998 - 11/17/1998 - Clarification of fall protection requirements for open holes on a construction site.