# Title
 1  2007 - 01/29/2007 - Detachable vs. permanent side shields for safety glasses; modifications to safety glasses.
 2  2006 - 12/19/2006 - "Continuous industrial processes" and the infeasibility of de-energizing equipment under 29 CFR 1910.333.
 3  2006 - 07/28/2006 - Clarification about 29 CFR 1910.333 and 29 CFR 1910.147 as they relate to work inside an electrical panel and on related equipment.
 4  2002 - 09/26/2002 - Use of ANSI C2-1997 as guidance for protecting employees working near insulated shielded conductors.
 5  2002 - 07/08/2002 - Use of verification tags for lockout.
 6  2000 - 07/10/2000 - Evaluation of proposed modifications to the Bureau of Prisons' Lockout/Tagout (LOTO) procedures.
 7  1999 - 12/07/1999 - Protection of workers operating mechanical equipment near overhead power lines.
 8  1999 - 05/20/1999 - Shutdown and restoration of power to equipment for a phase-to-ground condition.
 9  1996 - 05/20/1996 - Letter requesting interpretation of the OSHA electrical standards as they apply to employees using insulated hand tools.
 10  1996 - 02/26/1996 - Minimum approach distances.
 11  1993 - 12/30/1993 - Eyeglasses with exposed metal parts.
 12  1993 - 03/17/1993 - Rulings or requirements for employees in the electrical trade to wear steel-toe shoes.
 13  1992 - 09/11/1992 - Nonconductive siderails for portable ladders for private or contractual fire departments.
 14  1992 - 04/28/1992 - Minimally acceptable levels of illumination; Resistor banks on overhead cranes; Overhead lines; Protective gloves on energized equipment.
 15  1990 - 09/07/1990 - Applicability of the new Electrical Safety final rule, Subpart S, to the construction industry