Documents referencing 1926.302

A to Z Index | En español | Contact Us | FAQs | About OSHA

QuickTakes

Print this Page

Print This Page

Decrease Text Size

Increase Text Size


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business

Federal Registers

#
1	1988 - 09/16/1988 - Hand Tools, Power-Operated; Correction - 53:36009

Standard Interpretations

#
1	2009 - 03/16/2009 - Whether electric hand tools disassembled and deemed irreparable by a tool repair service are required to be returned disassembled.
2	2005 - 05/11/2005 - Requirements for leaving construction equipment and powder-actuated tools unattended on a construction building site; impalement protection from reinforcing steel for masonry workers on a scaffold.
3	2003 - 05/19/2003 - Repair requirements for the cord plug (attachment plug) of double-insulated tools.
4	2001 - 12/11/2001 - Guarding requirements for a rotary pneumatic angle-drive hand-held tool.
5	1995 - 09/05/1995 - Statement of compliance from OSHA for a pole-mounted powder actuated tool.
6	1986 - 12/12/1986 - Laboratory testing requirements for hand-held electrical construction tools.
7	1982 - 04/08/1982 - Pneumatic tools must be designed and used in accordance with good engineering practices.
8	1982 - 03/02/1982 - Fasteners used in tools shall be only those specifically manufactured for use in such tools.
9	1979 - 05/14/1979 - Pneumatically operated staplers.
10	1978 - 04/03/1978 - The requirement for fire resistant fluids does not apply to hydraulic tools.
11	1978 - 02/06/1978 - If work may accidently come into contact with an energized line, do not use a conductive hose.