Documents referencing 1910.213

A to Z Index | En español | Contact Us | FAQs | About OSHA

QuickTakes

Print this Page

Print This Page

Decrease Text Size

Increase Text Size


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business

Federal Registers

#
1	1984 - 02/10/1984 - Machine Guarding - 49:5318
2	1984 - 02/10/1984 - Revocation of Advisory and Repetitive Standards - 49:5318
3	1982 - 05/28/1982 - Machine Guarding - 47:23481
4	1973 - 05/11/1973 - Machine Guarding - 38:12405

Standard Interpretations

#
1	2005 - 01/31/2005 - Requirements for protecting against the automatic restart of low-voltage light-duty woodworking and metalworking equipment following an unscheduled electrical outage.
2	2003 - 05/13/2003 - OSHA machine guarding standards and the ISO/IEC standards adopted under the GATT; National Emphasis Program on Amputations.
3	1996 - 04/25/1996 - Permanent Variance Requirements for Self-Feed Circular Ripsaws.
4	1996 - 03/14/1996 - Request for Interpretation - 29 CFR 1910.213(f)(2).
5	1994 - 10/19/1994 - Information relating to radial saws.
6	1991 - 03/13/1991 - Automatic return attachments on radial saws
7	1984 - 03/12/1984 - Conformance of the Blue Line PFR/Power Failure Release Option with applicable OSHA standards.
8	1977 - 10/11/1977 - The point of operation guarding on the Biro Power Meat Cutters (bandsaws).