Directives
#
 1  1979 - 01/02/1979 - STD 01-12-022 [STD 1-12.22] - 29 CFR 1910.212(a)(3)(ii) Point of Operation Guarding for All Machines as Applied to the Hand-Fed Engraving Presses Used ...

Standard Interpretations
#
 1  2005 - 04/22/2005 - Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses.
 2  2001 - 06/05/2001 - Use of Electro Sensitive Protection Equipment as point of operation guarding devices.
 3  1999 - 02/26/1999 - OSHA enforcement policy on vertical food mixers.
 4  1994 - 09/20/1994 - Standard 1910.212 in regards to its applicability to guard an area above the ram/piston on a vertical hydraulic downstroke/trash compactor.
 5  1992 - 08/05/1992 - Presence Sensing Palm Button Devices (PSPBD).
 6  1991 - 04/15/1991 - Clarification of Scope of OSHA Instruction STD 1-12.22
 7  1989 - 08/03/1989 - The feasibility of OSHA's machine guarding requirements in their workplace.
 8  1987 - 11/02/1987 - Acceptable guarding for continuous cycling boneless meat tenderizers.
 9  1986 - 08/08/1986 - The safe use of portable, compressed-air-actuated, fastener driving tools (staple guns).
 10  1986 - 04/20/1986 - Power Press Brakes.
 11  1985 - 03/25/1985 - Applicability of 1910.212(a)(3)(ii) to Portable Pneumatic Powered Fastener Tools.
 12  1981 - 05/26/1981 - The manner in which OSHA provides for suitable applications of the ANSI B11.3 specification standard.
 13  1980 - 12/15/1980 - Oil Rig Inspection.
 14  1975 - 01/07/1975 - Guarding by location is permitted with certain provisions.