Documents referencing 1926.251(a)(4)

A to Z Index | En español | Contact Us | FAQs | About OSHA

QuickTakes

Print this Page

Print This Page

Decrease Text Size

Increase Text Size


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business

Standard Interpretations

#
1	2010 - 03/01/2010 - Testing requirements for "lifting blinds" or "lifting covers" on pressure vessels.
2	2004 - 03/04/2004 - Wire rope clips on suspension scaffolds; safety latches on large crane hooks; order of assembly for hanging scaffolds; and horizontal lifeline design.
3	2004 - 02/09/2004 - Requirements for load-testing and marking of special custom-design rigging accessories; applicability of ASME standards.
4	2003 - 07/07/2003 - Marking and proof-testing requirements for special custom-designed lifting accessories.
5	2003 - 02/25/2003 - Retesting of reassembled lifting accessories if original manufacturing controls are ensured; retesting requirement if repair/replacement of parts due to breakage, damage, or evidence of diminished capacity.
6	2002 - 08/15/2002 - Rigging equipment for material handling; custom-designed accessories.
7	2002 - 06/14/2002 - Custom-designed lifting accessories must be proof-tested and marked before being deployed for use and after repair or replacement.

Regulations (Standards - 29 CFR)

#
1	1926.251 - Rigging equipment for material handling.