Documents referencing 1926.453(b)(2)(v)

A to Z Index | En español | Contact Us | FAQs | About OSHA

QuickTakes

Print this Page

Print This Page

Decrease Text Size

Increase Text Size


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business

Standard Interpretations

#
1	2012 - 04/20/2012 - Clarification on the use of safety monitors as a method of fall protection on a low-slope roof.
2	2010 - 03/20/2010 - Whether OSHA standards require employees to be tied off while working over water on an aerial lift.
3	2004 - 02/23/2004 - Permissibility of attaching welding leads to an occupied aerial lift bucket and using an external lifeline to anchor fall arrest equipment.
4	2004 - 02/02/2004 - Compliance of an aerial lift fall protection device connected with a releasable tether and a non-releasable tether.
5	2001 - 05/11/2001 - Standards applicable to aerial lifts; acceptable uses of body belts as restraint systems and positioning devices.
6	2001 - 05/03/2001 - Use of aerial lifts to transport workers to elevated workstations; scissor lifts are not covered by the aerial lift provisions.
7	2000 - 08/14/2000 - Fall protection for various lift-devices; restraint, positioning, fall arrest and rescue requirements; maintenance vs. construction examples.
8	2000 - 02/23/2000 - Fall protection, training, inspection and design requirements of aerial lifts and scissor lifts/scaffolds.
9	1999 - 02/18/1999 - Anchoring of fall arrest system to aerial lifts; fall arrest vs. restraint systems.

Regulations (Standards - 29 CFR)

#
1	1926.453 - Aerial lifts.